Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO₂ emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production.Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO₂ emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions.Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement.     

The switching effect of environmental taxation within Bertrand differentiated duopoly

We investigate second-best optimal taxation of the polluting variety of a product in a Bertrand duopoly with differentiated varieties. The analysis provides novel insight on a useful social function of environmental regulation. Besides internalizing the environmental externality, the taxation of the polluting variety improves the matching of consumers and product varieties, and so creates a socially desirable business switching between the differentiated varieties.     

An energetic perspective on the relationship between disturbance and ecosystem productivity

Previous ecological models for disturbance from energetic perspectives have focused on destructive pulses by which storages in a system are quickly drained during disturbance events and recovered thereafter. However, considering the wide range of disturbance intensities, frequencies, and durations in nature, disturbance effects on ecosystem energetics would be better understood by diversifying the disturbance effects on specific system configurations or energy pathways. Based on two hypotheses, we built simulation models of the variable disturbance-productivity relationships observed in a freshwater aquatic microcosm study. First, we hypothesized that disturbances will differentially alter the intrinsic rates of energy pathways in a system. Second, we hypothesized that there is a disturbance threshold where response of the intrinsic rates changes abruptly. Simulation results showed variable patterns of gross primary productivity (GPP) during the disturbance and post-disturbance periods under the diverse scenarios of disturbance effects on the intrinsic rates. Simulation results confirmed that the second hypothesis (i.e., disturbance threshold) was essential to achieve a U-shaped or peaked disturbance-productivity relationship. We evaluated the models by comparing them with the results of the microcosm tests, and suggested possible mechanisms of the variable disturbance-productivity relationships by varying parameters related to the disturbance effects on the intrinsic rates and the disturbance thresholds.     

Uncovering results in electro-scrubbing process toward green methodology during environmental air pollutants removal

Present findings uncovered the electro-scrubbing process as a green methodology. This green methodology was assessed by an analysis of electrode dissolution into an electrolyte and acid fumes emission to the atmosphere. As an initial experiment oxidation effect of Co(II) by PbO₂ electrode revealed an enhanced oxidation efficiency of ∼20% compared to a Pt-coated Ti electrode. The mist concentration from the first scrubber test was approximately 30 times lower than that of the indoor air particles. In addition, molar mass of Co(II) and SEM analyses revealed no Co(II) or PbO₂ from the first scrubber. An analysis of the second scrubber showed no Co(II), PbO₂ or pH changes during a 24 h study confirming that no sulphuric acid escaped from the first scrubber or mediator containing electrolyte solution. This electro-scrubbing process was applied to the air pollutants removal process, in which a definite ratio between Co(III) and odor gases at given concentrations were identified. These results show that this electro-scrubber can maintain its initial concentration of Co(II) and H₂SO₄ by just adding water, and is become a highly sustainable and green methodology system without a loss of H₂SO₄ and Co catalysts to the environment.     

Experimental studies of removing typical VOCs by dielectric barrier discharge reactor of different sizes

This research conducted both lab-scale and pilot-scale tests by selecting toluene as the typical volatile organic compounds (VOCs) and by using the promising non-thermal plasma oxidation technology – dielectric barrier discharge (DBD). To develop baseline engineering data to demonstrate the feasibility of application of self-made DBD reactors, the peak voltage, gas flow speed, initial toluene concentration, discharge frequency and duty ratio were studied. The results showed that toluene removal efficiency improves with increase of electrical voltage, frequency and duty ratio, and declines with increase of polar distance, gas flow speed and toluene initial concentration. When the voltage increases, the energy efficiency rises first and then drops. The energy efficiency reaches the climax when the energy density reaches 150.8 J/L and 101.7 J/L in the lab-scale experiment and pilot-scale experiment respectively.     

Analysis of energy security and sustainability in future low carbon scenarios for Brazil

This study estimated a series of indicators to assess the energy security of supply and global and local environmental impacts under different mitigation scenarios through 2050 in Brazil, designed with the integrated optimization energy system model MESSAGE‐BRAZIL. The assessment of interactions between environmental impacts and energy security dimensions was complemented through the application of life cycle assessment (LCA) methodology. Overall results imply energy security establishes more synergies than trade‐offs in increasingly stringent mitigation scenarios, especially patent within the sustainability dimension, which increases energy security and provides additional benefits regarding climate change mitigation and air pollution emissions. It is still necessary to extend analysis to other energy sectors in addition to the power supply sector and to promote a better understanding of repercussions of energy scenario expansion in energy security.     

Wind energy development in Ontario: a process/product paradox

The Province of Ontario is aggressively pursuing renewable energy development, but not without significant turbulence. Ontario's Green Energy Act (2009) reflects this aggressive pursuit, and is aimed at making the province a global leader in renewable energy development. Wind energy is an integral but controversial part of these commitments. While several installations have been built or announced, conflicts surrounding the development of the technology continue to grow. This article documents, analyses and interprets media coverage in order to understand public discourse potentially driving support for and resistance to wind energy development (WED) in Ontario. Contrary to numerous studies which have elucidated public attitudes towards WED, the media discourse analysed suggests that roadblocks to public acceptance of the technology are more rooted in the development process (renewable energy policies and their implementation) rather than the products of WED (wind turbines). The study highlights the need for increased procedural justice to ameliorate feelings of unfairness which play a key role in fuelling resistance to the technology.     

A Parametric Study of a Piston-Prop Aircraft Engine Using Exergy and Exergoeconomic Analysis Methods

In this study, exergetic and exergoeconomic analysis methods are applied to a four-cylinder, spark ignition (SI), naturally aspirated and air-cooled piston-prop aircraft engine in the cruise phase of flight operations. The duration of cruise is selected to be 1 h. Three parameters, altitude, rated power setting (PS), and air-to-fuel ratio (AF), are varied by the calculation of the max–min values of exergy analysis. Based on the results of energy analysis, the values for the maximum energy efficiency and fuel consumption flow rate are calculated to be 21.73% and 28.02 kg/h, respectively, at 1000-m altitude and 75% PS. The results of exergy analysis indicate that all exergetic values vary from 65% to 75% PS, while this increase is not seen in exergoeconomic analysis. While the maximum exergy input rate is obtained to be 405.60 kW, exergy efficiency has the minimum value with 14.43% and exergy destruction rate has the maximum value with 168.48 kW. These values are achieved at 3000-m altitude and 18 AFs. The maximum average exergy cost of the fuel is calculated to be 130.77 $/GJ at 1000-m altitude, 13 AF ratios, and 65% PS. At this point, while the minimum cost rate associated with the exergy destruction is obtained to be 40.29 $/h, the maximum exergoeconomic factor is found to be 19.98%.     

Multilevel analysis of factors affecting participants’ land reconversion willingness after the Grain for Green Program

Understanding the postprogram land use plans of participants is necessary for the sustainability of the conservation achievements from payments for ecosystem services (PES) programs. Previous studies have analyzed many individual factors affecting participants’ reconversion plans after PES programs. However, whether the regional ecosystem services changes caused by PES programs affect reconversion willingness remains elusive. Here, we used the multilevel linear model to determine the effects of regional ecosystem services changes and individual characteristics on participants’ land reconversion willingness after the Grain for Green Program (GFGP) in the Yanhe watershed of the Loess Plateau. We found that household income, ecological awareness, and employment changes negatively affected reconversion willingness, while nonfarm employment positively affected it at the individual level. At the regional level, the grain production and water yield changes could influence the reconversion willingness of respondents with different individual characteristics. With improved understanding of the factors affecting reconversion willingness, several suggestions to improve the sustainability of the GFGP were proposed. Our study provides a template for analyzing the multilevel factors that affect the sustainability of other PES programs.