外力作用下管道内表面缺陷处裂纹扩展研究

为提高油气管道安全风险评估的准确性,以含内表面缺陷管道为研究对象,利用ABAQUS软件线弹性及弹塑性分析不同尺寸缺陷对裂纹萌生特征的影响;采用扩展有限元法,建立管道3点弯曲模型与全尺寸静载物理试验,并非线性拟合裂纹扩展尺寸,研究内表面缺陷处裂纹扩展情况.研究结果表明:内表面缺陷中心处极易萌生裂纹,随着缺陷尺寸的增大,裂...     

太湖沉积物重金属污染及生态风险性评价

对1993年～1999年所采集的太湖表层沉积物中重金属含量进行了统计分析和生态风险性评价.结果表明,太湖沉积物的pH值呈中性至弱碱性,较适合于沉积物中粘土矿物及腐殖质对重金属的吸附;太湖大部分地区沉积物未受到重金属污染,且沉积物中重金属处于安全状态.沉积物生态风险性指数评价结果也表明,太湖大部分地区目前无重金属生态危害.     

重金属光谱分析仪与原子吸收光谱测定土壤中的重金属

采用重金属光谱分析仪与原子吸收光谱测定土壤中的Cr、Cu、Ni、Pb、Zn和As六种金属,结果发现,重金属光谱分析仪对Cu、Pb、Zn和As四种金属的检测结果较为理想,与原子吸收光谱的检测数据接近,误差可满足现场检测的要求.重金属光谱分析仪测定方法简便,操作简单,省时省力,可满足大部分重金属检测的要求.     

CRC-ICP-MS在重金属突发环境事件中的半定量方法研究

采用非反应性的He碰撞模式和动能歧视与ICP-MS的联用技术,建立了一套在重金属环境突发事件中的半定量检测方法.通过对三江口表层水样加标回收及ESS-2标准土壤样品的半定量分析,结果显示,该方法能够有效消除各种来源和各种活性的多原子离子干扰,实现多种重金属元素的一次性快速测定,水样的回收率85.5%～09%,标准土壤样品的回收率84%～107%.该方法已成功应用于两次突发环境事件中,为快速处理提供了科学依据.     

钼矿区周边农田土壤中重金属污染状况的分析与评价

对钼矿区周边农田土壤重金属污染情况进行了详细研究.选择该矿区受污染农田土壤样本80个,采用HNO3-HF-HClO4混酸对土壤样品进行处理,运用欧共体参比司推荐的BCR三步连续提取法进行化学形态分析;使用等离子体发射光谱仪(ICP-AES)测定土壤样品中Mo、Pb、As、Hg、Cr、Cd、Zn、Cu、Ni的全量及各种化学形态的含量并进行评价,同时对矿区地下水进行分析;采用spas软件进行数据分析.结果表明,矿山周边农田土壤重金属主要污染物为Cd、Hg并伴有Cr污染;Nemerow综合指数6.81,综合评价结果为该区土壤已受严重污染;Cd与As污染来源基本相同,Cu、Ni、Zn污染来源基本相同,Hg有独立的污染来源;重金属中化学形态分布为残余态>有机结合态>氧化结合态>酸可提取态;重金属Cr及Hg的有效态比例较大,可能会影响农作物的正常生长;矿山周边农田土壤重金属污染的原因可能是污染地下水的浇灌,矿石的开采、运输和大气降尘等过程;有机农药及塑料农用制品的施用过程,自然成土、矿物的伴生及其转化等过程.     

黔西北土法炼锌矿区重金属污染现状及其环境影响评价

在对黔西北土法炼锌四个矿区周围的土壤和植物(蔬菜和作物等)进行全面调查的基础上,对土壤和植物重金属(Zn、Cd、Pb、Cu和As)污染现状进行了监测与初步评价.结果表明,四个土法炼锌矿区除野马川的土壤属于中度污染外,其余全部处于严重污染状态,并且Cd是每个矿区的主要污染元素;土法炼锌矿区周围的蔬菜已全部受到严重污染,综合污染指数在10.83～40.67之间,属于重度污染,蔬菜污染主要以Cd为主,超过国家食品卫生标准54倍;矿区周围其他植物如土豆、玉米和绿肥等中的重金属亦严重超标,主要以Pb污染为主,超过国家食品卫生标准366.75倍.说明矿区土壤中种植作物的生长及食用安全已经受到重金属污染的严重影响,对居民健康构成潜在威胁.     

官厅水库重金属污染状况调查研究

为确保北京市饮用水源安全,2007年对官厅水库中重金属进行了筛选性调查.采用电感耦合等离子体质谱仪(ICP-MS),对官厅水库枯水期和丰水期水体中的金属元素含量进行了全面的分析.监测结果表明,水库在丰水期砷含量偏高,整体水质状况良好,重金属污染程度轻微.     

Influence of the shape of mitigation barriers on heavy gas dispersion

Regasification plants have become an emerging risk because their numbers are increasing and concern from the general population towards these systems has grown. Consequently, there is increased interest in investigating the effect of mitigation measures to limit the impact of large accidents on the population living close to the plant. Among the various possible mitigation measures, physical barriers present several advantages; however, it is known that the necessary barrier height can became impracticably large to be effective in mitigating the consequences of a large LNG release. Therefore, computational fluid dynamics models were used in this work to analyze the performance of mitigation barriers with different shapes to investigate the possibility of increasing mitigation barrier efficiency by simply changing the main geometrical characteristics of the barrier such as roughness, battlements, or even holes.     

Heavy metal distribution and speciation in the Northern Adriatic Sea

In the present study the concentrations of cobalt, copper, iron, manganese, zinc were analysed and the speciation of copper and zinc performed, with a summer and winter sampling, for two areas in the Northern Adriatic Sea and crossing at the farthest zones of the Po river-sea water interface. Results show that when salinity increases the concentrations of all investigated metals (with the exception of cobalt) present some degree of biogeochemical cycling. Copper is the element whose dissolved phase has the highest importance in metal transport across the salinity gradient. Results of speciation analysis demonstrate that the presence of excess amounts (5-8 fold) of unbound ligands confers a buffering capacity for potential inputs of dissolved metals into the Northern Adriatic Sea. The speciation of both copper and zinc in the dissolved phase was dominated by organic complexation.     

Experimental evaluation of emission factors of cement kilns burning hazardous wastes

Cement industry is an interesting way to eliminate combustible wastes. Thermal valorization is maximal, conditions of combustion are especially favorable to the destruction and the trapping of pollutants, and there are neither ultimate residues (slag) nor aqueous rejects. Moreover the properties of the cement are not modified. Nevertheless the increased use of substitution fuel may lead to deal with unusual amounts of heavy metals. Tests were realized on several rotary cement kilns with varying substitution ratios of fossil fuels by wastes. Mass balances were fitted over the whole plant, and emission factors were explained.