Life Cycle Assessment of Ultra-clean Micronized Coal Oil Water Slurry

Life cycle assessment is applied to assess the ultraclean micronized coal oil water slurry （UCMCOWS） with SimaPro and the environmental impact of UCMCOWS on its whole life cycle is also analyzed. The result shows that the consumption of energy and products are increasing along with the deepening of UCMCOWS processing, UCMCOWS making and combustion are the two periods which have a bigger impact on eco-system and human health. As a new substitute of fuel, UCMCOWS merits to be utilized more efficiently and reasonably.     

Growth, yield and elements content of wheat (Triticum aestivum) grown in composted municipal solid wastes amended soil

A commercial formulation of composted municipal solid wastes (MSW) was used for amending soil at 0, 50, 100, 150, 200 and 250 kg ha⁻¹ in which wheat had been grown (field experiments) and element residues of amended soil and plant parts were enumerated. MSW amendment caused a significant improvement in soil quality. Growth (shoot length, leaf number, leaf area, tiller number, plant dry weight and chlorophyll contents of leaves) and yield (length of panicle, number of panicles per plant and grain yield per plant) of wheat increased gradually up to the MSW-amendment level of 200 kg ha⁻¹. Elements, Ni, Zn, Cu, Cd, Cr, and Pb accumulated in plants from MSW amended soil, but the degree of metal accumulation was the least in seeds in comparison to other plant parts (root, stem and leaf). Moreover, Ni, Zn, Cd and Pb, were in high concentration in all plant parts. It is recorded that the level of 200 kg ha⁻¹ MSW amendment caused better growth and yield of wheat, but progressive levels of metal accumulation in plant parts were recorded due to increase in amendment levels. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Interactions of Trametes versicolor, Coriolopsis rigida and the arbuscular mycorrhizal fungus Glomus deserticola on the copper tolerance of Eucalyptus globulus

The presence of high levels of Cu in soil decreases the shoot and root dry weights of Eucalyptus globulus. However, higher plant tolerance of Cu has been observed in the presence of the arbuscular mycorrhizal (AM) fungus Glomus deserticola. The hyphal length of G. deserticola was sensitive to low Cu concentrations, and the percentage of AM root colonisation and the metabolic activity of the AM fungus were also decreased by Cu. Therefore, a direct effect of Cu on the development of the AM fungus inside and outside the root cannot be ruled out. E. globulus colonised by G. deserticola had higher metal concentrations in the roots and shoots than do non-mycorrhizal plants; however, the absence of a higher root to shoot metal ratio in the mycorrhizal plants (1.70 ± 0.11) indicated that G. deserticola did not play a filtering/sequestering role against Cu. The saprobe fungi Coriolopsis rigida and Trametes versicolor were able to remove Cu ions from the asparagine–glucose growth media. However, plants inoculated with C. rigida and T. versicolor did not accumulate more Cu than non-inoculated controls, and the growth of the plant was not increased in the presence of these fungi. However, C. rigida increased the shoot dry weight, AM root length colonisation, and metabolic mycelial activity of plants colonised with G. deserticola in the presence of Cu; only this saprobe-AM fungus combination increased the tolerance of E. globulus to Cu. Inoculation with G. deserticola and C. rigida increased the E. globulus Cu uptake to levels reached by hyperaccumulative plants.     

Biosorption of Cu and Zn from aqueous solutions by dried marine green macroalga Chaetomorpha linum

The biosorption of the heavy metals Cu²⁺ and Zn²⁺ by dried marine green macroalga (Chaetomorpha linum) was investigated. The biosorption capacities of the dried alga for copper and zinc were studied at different solution pH values (2–6), different algal particle sizes (100–800 μm) and different initial metal solution concentrations (0.5–10 mM). An optimum pH value of 5 was found suitable for both metal ions biosorption for both metal ions. At the optimum particle size (100–315 μm), biosorbent dosage (20 g/l) and initial solution pH (pH 5), the dried alga produced maximum copper and zinc uptakes values (q_max) of 1.46 and 1.97 mmol/g respectively (according to the Langmuir model). The kinetic data obtained at different initial metal concentrations indicated that the biosorption rate was fast and most of the process was completed within 120 min. This study illustrated an alternative technique for the management of unwanted biological materials using processed algal material. C. linum is one of the fast-growing marine algae in the lake of Tunis and could be utilized as a biosorbent for the treatment of Cu²⁺ and Zn²⁺ contaminated wastewater streams.     

Bioleaching of heavy metals from sewage sludge: A review

During the treatment of sewage, a huge volume of sludge is generated, which is disposed of on land as soil fertilizer/conditioner due to the presence of nitrogen, phosphorus, potassium and other nutrients. However, the presence of toxic heavy metals and other toxic compounds in the sludge restricts its use as a fertilizer. Over the years, bioleaching has been developed as an environmentally friendly and cost-effective technology for the removal of heavy metals from the sludge. The present paper gives an overview of the various bioleaching studies carried out in different modes of operation. The various important aspects such as pathogen destruction, odor reduction and metal recovery from acidic leachate also have been discussed. Further, a detailed discussion was made on the various technical problems associated with the bioleaching process, which need to be addressed while developing the process on a larger scale.     

Copper and zinc bioavailabilities to ryegrass (Lolium perenne L.) and subterranean clover (Trifolium subterraneum L.) grown in biosolid treated Chilean soils

The purpose of this study was assessing Cu and Zn availabilities in soils amended with a biosolid through the determination of their sequentially extracted chemical forms and their relationship with the contents of these metals in ryegrass (Lolium perenne L.) and subterranean clover (Trifolium subterraneum L.) plant tissues cultivated in a greenhouse using four soils classified as Aquic Xerochrepts and Ultic Haploxeralfs representatives of potential areas for biosolids application in the central zone of Chile. The soils were treated with sewage sludge at a rate of 0 and 30 Mg ha⁻¹. The greenhouse experiment was carried out through a completely randomized block design in a 2 × 4 (biosolid rate × soil) arrangement, considering three repetitions per treatment. The soils used in the greenhouse experiment before and after cultivation, were sequentially extracted with specific reagents and conditions in order to obtain the following fractions: exchangeable, sodium acetate-soluble, soluble in moderately reducing condition, K₄P₂O₇-soluble, soluble in reducing condition, and soluble in strongly acid and oxidizing condition. It was established that Cu and Zn were predominantly found in soils in less available forms, associated to organic matter, oxides and clay minerals. Zinc concentration in ryegrass plants was higher than that found in subterranean clover plants in biosolid-amended soils. Zinc contents in ryegrass shoot and root correlated with the exchangeable, bound-to-carbonate, and bound-to-FeOx metal forms in control soil. Copper and Zn bioavailabilities were estimated through satisfactorily fitted multiple linear regression models, with determination coefficients from 0.77 to 0.99, which showed a positive contribution of the labile metal forms in soils, especially in relation to Zn in both plant species.     

油气生产过程中集输设施安全管理问题研究

针对油气生产中集输设施安全问题导致的油气泄漏引发的问题,以系统的方法分析其观念、技术、方法对集输设施管理的影响。围绕石油企业降本增效和可持续发展战略目标,从投资、建设、管理、养护各环节,管理体制、运行机制、管理方式等各方面系统研究,通过明确职能、落实责任、制定标准、严格程序、科学奖惩、强化管理等手段,从而树立正确管理理念,完善设施投入机制、监督考核机制、激励约束机制,强化企业管理基础工作等方面,提出与该系统工艺流程相适应的管理模式和方法,以管理优化保障工艺优化,延长设施使用寿命,提高系统运行效率,确保安全生产。     

基于小波包分析的石油井架结构损伤识别试验研究

通过对井架相似模型损伤工况模拟,提取其在承载时的振动响应信号,利用小波包变换方法获得小波包节点能量,得到基于归一化能量特征向量的损伤评价指标。研究表明:该指标可用于井架结构损伤位置的准确识别;将小波包能量分析与振动测试技术相结合的研究方法,为石油井架的损伤识别提供了新思路。     

油码头、液体化学品码头安全风险问题的探讨

本文讨论了油码头与液体化学品码头选址、油码头总平面布置、码头管线腐蚀、港口运营风险标准与风险评估方法等问题,提出了相应的对策措施。