城中村雨水污水完善改造方案浅析

结合深圳盐田区城中村污水完善改造设计及施工服务中所遇到的问题,提出为彻底解除雨水污水混流现象而采取的措施和方法,以作为今后城中村雨水污水分流制改造过程中的借鉴或参考。     

磁絮凝法处理DZA有机废水的研究

本文介绍了磁絮新颖产分离技术，应用该技术能有效处理水中ＤＺＡ有机物，实现数秒内的快速分离污泥，污泥含水率低。     

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.     

New eco-friendly proposal for the crystallization of beet raw juice

In the past years we evaluated different strategies with the aim of eliminating completely from the beet sugar factory, the traditional calco-carbonic purification process taking into account the well-known problems related to the utilization of lime and the production of carbonation sludge.To complete the picture of the possible solutions to be adopted for the elimination of the traditional purification process, we tested and evaluated in laboratory and in pilot plants a new eco-friendly proposal.The results obtained, as well as the proposed flow-sheet and some economic evaluations, are presented and discussed.     

实时合成水滑石分离模拟放射性核素锶的研究

采用实时合成水滑石的方法从高放废液中分离模拟放射性核素锶,通过单因素实验并借助XRD分析确定了最佳分离实验条件,同时,运用FTIR、SEM等技术手段对合成的含锶水滑石的结构、形貌进行了分析.结果表明,当Sr2+初始浓度为70mg.L-1、pH值为10.5、n(Mg+Sr)/n(Al)为3时,锶的去除率最高可达95%以上;XRD和SEM分析结果表明,锶嵌入了水滑石的晶格中,合成的含锶水滑石形貌为层状六边形;含锶水滑石煅烧产物主要为尖晶石,且煅烧产物中未见氧化锶,表明嵌入到水滑石晶格中的锶在煅烧后存在于尖晶石的晶体结构中.     

混合气体直接吸附分离回收过程研究

以精密陶瓷制造过程中排放的甲苯和异丙醇混合气体为目标气体,采用4段活性炭吸附柱串联吸附实验方式研究了混合组分气体直接吸附分离回收的可行性.结果表明,异丙醇和甲苯这2种物性具有一定差异的物质在吸附床的长度方向存在明显的分层吸附现象.在表观气速0.42 m·s-1、异丙醇与甲苯入口浓度分别为477 mg·m-3和746 mg·m-3、吸附柱总长为26cm条件下,通气吸附798 min时,0～10 cm长度段炭层吸附甲苯量为184.5 mg·g-1,吸附异丙醇量为0 mg·g-1,而21～26 cm长度段炭层吸附甲苯量为0.92 mg·g-1,吸附异丙醇量为91.2 mg·g-1,通过分段再生回收分别得到了纯度99%以上的甲苯和异丙醇回收液.弱吸附质异丙醇在吸附过程中存在气相浓度增浓现象,该现象导致实验条件下部分活性炭层区域对异丙醇的吸附量提高了27%以上.通过多段串联吸附、分段再生回收的方式可以实现混合气体的直接吸附分离回收.     

印染废水RO浓水水质分析

以江苏某印染废水处理厂反渗透（RO）浓水为研究对象,采用多种分析手段分析了RO浓水的水质特征.首先采用IC和ICP-MS对水中的无机离子进行了定性和定量分析,采用GC-MS对废水中的半挥发性有机物进行定性和定量分析.结果表明,RO浓水中无机离子以Na⁺、Cl^-和SO₄^2-为主,半挥发性有机物邻苯二甲酸二（2-乙基己）酯（DEHP）为主要成分,其浓度为1.452mg/L.为分析RO浓水中的溶解性有机物（DOM）特征,进一步采用超滤膜分子量分级法和树脂亲疏水分离技术对废水中的DOM进行分离解析,分析了不同组分的溶解性有机碳（DOC）、UV₂₅₄、SUVA含量和分布情况,应用三维荧光光谱对各组分物质进行了定性分析.超滤分级表明,RO浓水中相对分子量<1k的有机物占56.98%,相对分子质量5~10k有机物仅占2.19%,但其芳香化程度较高.树脂分离结果表明,RO浓水中亲水性物质（HPI^*）、疏水性物质（HPO^*）和过渡性物质（TPI^*）的DOC含量差异不大,其中HPO^*的芳香构造化程度最高,含有较多的色氨酸类芳香族蛋白质,而HPI^*中含有较多的溶解性微生物代谢产物类物质.     

Floating Population Increase and Its Influence on the Urban Population Situation:A Case Study in Beijing

1 BACKGROUND OF FLOATING POPULATIONIN CHINAChina's urbanization process was influenced mainly bythe government interventions before the adoption of thesocial and economic reform started in 1978. Since thefoundation of the People's Republic of China, thegovernment had strictly controlled the internal migration,especially from rural to urban areas. The ability of thegovernment to make a strong impact on the migrationand urbanization was realized by the household registrationsyste…     

电解浮选用于活性污泥固液分离的研究

在装有Ti/RuO₂-IrO₂-TiO₂阳极、Ti阴极的电解浮选槽中进行了活性污泥固液分离的研究.考察了影响电解浮选性能的操作参数,这些参数包括水力停留时间、电流密度、进水SS浓度和进水pH值.研究表明,电解浮选是高效的固液分离单元,水力停留时间和电流密度是主要的影响因素.SS的去除率随着水力停留时间和电流密度的增加而增大;污泥负荷增加,SS的去除率下降;pH值影响电解产生微气泡的尺寸和污泥性质,但对SS的去除影响不大,实际应用中可以不调节pH值.进水SS约1 000mg/L时,当水力停留时间为20min,接触室电流密度为5 mA/cm²,分离区电流密度为2.5 mA/cm²,SS的去除率可达97%以上,此时的能耗为0.4～0.5(kW.h)/m³废水.电解浮选产生的浮渣含水率为95.9%,低于溶气气浮和二沉池的污泥含水率,对污泥减量化及其最终处置有较大的意义.