Adsorptive removal of direct dyes by PEI-treated peanut husk biomass: Box–Behnken experimental design

This paper reports the application of Box-Behnken experimental design to illustrate the adsorption of direct dyes (Indosol Black NF and Indosol Orange RSN) using polyethyleneimine (PEI)-treated peanut husk biomass. The effect of three independent variables (initial dyes concentration, biosorbent dose and pH) was investigated during the study. Maximum biosorption capacity (141 and 98.2 mg/g) of PEI-pretreated biomass was achieved with 200 mg/L initial dye concentration and 0.05 g/50 mL biomass dose for Indosol Black NF and Indosol Orange RSN, respectively. Acidic pH was found to be favourable for maximum dyes removal. Characterisation of biosorbent was carried out through Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy, thermogravimetric analysis (TGA) and point of zero charge determination. FT-IR analyses confirmed the involvement of carboxylic and carbonyl groups. The desorption study was also conducted to check out the possibility of regeneration of dyes and adsorbent and it was found that 51.58 and 76.6% of Indosol Black NF and Indosol Orange RSN, respectively, can be desorbed from the loaded biosorbent by using 1 M NaOH solution. The results indicated that PEI-treated peanut husk biomass can be used as an efficient biosorbent for the removal of Indosol Black NF and Indosol Orange RSN dyes from aqueous solutions.     

Evaluation of the performance of rural wastewater treatment plants using chemical measurements in combination with statistical techniques: a case study

The performance of a wastewater treatment plant was assessed statistically using multivariate cluster and principle component analysis. This was after measuring some physico-chemical properties in the influent, effluent, downstream, and upstream waters over a 4-month period. The cluster analysis grouped the sampling sites into three clusters: relatively non-polluted (upstream), medium polluted (downstream), and polluted (influent and effluent). The polluted water was further subdivided into very highly (influent) and highly (effluent) polluted. The grouping of influent and effluent into one cluster was due to some water quality parameters such as amount of copper, lead, and phosphates that are not efficiently removed by the plant. Using principal component analysis, samples from the same site taken over a period of 4 months were scattered, indicating inconsistencies in the performance of the plant. This was more pronounced during the rainy season, suggesting that increased water volumes from open sewers make the already poorly performing plant worse. The major loading factors found by principle component analysis were phosphate, lead, iron, zinc, copper, pH, and conductivity. Generally, the wastewater treatment system was found to be efficient in removing heavy metals and these were found in the sludge, but not anions. The mean percentage metal removal could be arranged in the following decreasing order: iron (85%)?>?zinc (57%)?>?copper (40%) and lead (38%) following the concentrations (mg?kg^?1) found in the sludge: iron (11,300)?>?zinc (820)?>?copper (180)?>?lead (20)?>?cadmium (3). Phosphate and iron concentrations in the effluent were found to be above the South African Bureau of Standards (SABS) recommendations. The major cause of poor performance is the high volume of the wastewater, exceeding the capacity of the plant 10 times.     

Dispersive liquid–liquid microextraction of cadmium(II) for preconcentration prior to flame atomic absorption spectrometric detection in water

A dispersive liquid–liquid microextraction procedure for cadmium(II) as its 2-(5-bromo-2-pyridylazo)-5-diethylamino-phenol chelate is presented. Carbon tetrachloride and methanol were used as extraction and dispersive solvents, respectively. After phase separation, the preconcentrated-separated cadmium(II) is determined by flame atomic absorption spectrometry with a microinjection technique. The factors which affected the extraction efficiency, i.e. the pH of the sample solution and the volumes of reagent and sample were investigated. The effects of some alkali, alkali earth, and transition metal ions, and of some anions on the recovery of cadmium were also studied. A preconcentration factor of 250 was obtained for a sample volume of 50?mL under optimum conditions. The method was validated by analysis of certified reference materials and applied to some water samples from Turkey.     

Cobalt speciation assay for human serum,Part II. Method validation in a study of human volunteers ingesting cobalt(II) chloride dietary supplement for 90 days

A new analytical method for determining cobalt (Co) species in human serum by size exclusion chromatography with inductively coupled plasma mass spectrometry (SEC-ICP-MS) was applied to serum samples collected from 12 human volunteers who participated in a Co(II) chloride supplement study involving ingestion of 1 mg Co/day for up to 90 consecutive days. The study protocol included determination of serum total Co by acid digestion followed by ICP-MS. Co speciation assay measurements were conducted for up to 13 time points per individual spanning from one to two weeks before dosing began to two weeks after dosing ceased. The Co speciation assay showed good recovery >91% relative to total Co measurements. Undiluted serum demonstrated uniform fractions of large molecular Co defined as Co bound to albumin and other proteins >50 kDa at 96% and the residual as small molecular Co defined as free Co(II) and <1 kDa Co-complexes for individual serum Co concentrations up to 146 μg/L. There were no dose-related changes in Co distribution. Analysis of the same serum samples with tenfold dilution in 0.1 M acetic acid led to a lower fraction of large molecular Co at 87%, with the difference between diluted and undiluted measurements being 8.4%. The difference noted between undiluted and diluted large molecular Co may be attributed to Co release from albumin. Data demonstrated that large molecular Co was the predominant Co species in both undiluted and diluted human serum over a broad range of in vivo Co concentrations, reflecting high albumin–Co binding capacity. These data validate the Co speciation assay and may be employed in understanding further the toxicokinetics and dose-response relationships for Co species.     

Solid phase extraction of trace metals from environmental samples using Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone and determination by inductively coupled plasma–atomic emission spectrometry

A method for the solid phase extraction of trace metals, namely Co, Cu, Pb, Ni and Zn, from environmental and biological samples using column Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone (HPPPTSC) and determination by inductively coupled spectrometry (ICP–AES) has been developed. The reagent has the capacity to form chelate complexes with the metals because of three binding sites in the reagent molecule. The optimum experimental conditions for the quantitative sorption of five metals, pH, effect of flow rate, concentration of eluent, sorption capacity and the effect of diverse ions on the preconcentration of analytes have been investigated. The sorption capacity of the resin has 83, 127, 35, 88 and 85?µmol?g^?1 for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺, respectively. The preconcentration factors for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺ were 100, 110, 120, 140 and 150, respectively. The accuracy of the proposed procedure was evaluated by standard reference materials. The achieved results were in good agreement with certified values. The proposed method was applied for the determination of trace metals in river water and plant leaves.     

Developed fungal–bacterial biofilms as a novel tool for bioremoval of hexavelant chromium from wastewater

Remediation measures for hexavalent chromium [Cr(VI)] are required for a safe environment. As a recent development in microbiology, bacterial biofilms are being studied as effective bioremediation agents. When bacteria are in fungal surface-attached biofilm mode, they are called fungal–bacterial biofilms (FBBs). They have not been tested for bioremediation so far. Hence, this study was conducted to develop FBBs and glass-wool-attached bacterial biofilms (BBs), and to evaluate Cr(VI) tolerability and removal of bacterial monocultures, BBs and FBBs. FBBs showed a significantly high level of Cr(VI) tolerance and resistance compared with its BBs or monocultures. After 10 days, up to 90% of Cr(VI) had been removed, which was significantly higher than that of BBs or its monocultures. Thus, it is clear that FBBs can be used as a novel tool to decontaminate Cr(VI) both in situ and ex situ.     

A multispecies assessment of wildlife impacts on local community livelihoods

Conflicts between the interests of agriculture and wildlife conservation are a major threat to biodiversity and human well-being globally. Addressing such conflicts requires a thorough understanding of the impacts associated with living alongside protected wildlife. Despite this, most studies reporting on human–wildlife impacts and the strategies used to mitigate them focus on a single species, thus oversimplifying often complex systems of human–wildlife interactions. We sought to characterize the spatiotemporal patterns of impacts by multiple co-occurring species on agricultural livelihoods in the eastern Okavango Delta Panhandle in northern Botswana through the use of a database of 3264 wildlife-incident reports recorded from 2009 to 2015 by the Department of Wildlife and National Parks. Eight species (African elephants [Loxodonta africana], hippopotamuses [Hippopotamus amphibious], lions [Panthera leo], cheetah [Acinonyx jubatus], African wild dogs [Lycaon pictus], hyenas [Crocuta crocuta], leopards [Panthera pardus], and crocodiles [Crocodylus niloticus]) appeared on incident reports, of which 56.5% were attributed to elephants. Most species were associated with only 1 type of damage (i.e., either crop damage or livestock loss). Carnivores were primarily implicated in incident reports related to livestock loss, particularly toward the end of the dry season (May–October). In contrast, herbivores were associated with crop-loss incidents during the wet season (November–April). Our results illustrate how local communities can face distinct livelihood challenges from different species at different times of the year. Such a multispecies assessment has important implications for the design of conservation interventions aimed at addressing the costs of living with wildlife and thereby mitigation of the underlying conservation conflict. Our spatiotemporal, multispecies approach is widely applicable to other regions where sustainable and long-term solutions to conservation conflicts are needed for local communities and biodiversity.     

Adapting a holistic approach to flood management in the Hawkesbury–Nepean region: complexities and perceptions of the agencies involved

This paper looks into the complexity of managing flood risks in the Hawkesbury–Nepean catchment, Australia. Several aspects are explored: (1) the complexities created by the way different agencies are involved in assessing flood risks; (2) different perceptions on acceptable flood risk level; (3) community engagement in defining acceptable flood risk level; (4) views on a holistic flood risk management plan; and (5) challenges of a centralised information system. This study concludes that the complexity of managing a large catchment is exacerbated by the difference in the way professionals perceive the problem. This has led to (1) different standards for acceptable risks; (2) inconsistent attempt to set up a regional-scale flood management plan beyond the jurisdictional boundaries; (3) absence of a regional-scale agency with licence to share and update information; and (d) lack of forums for dialogue with insurance companies to ensure an integrated approach to flood management.     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.