Hydrologic Landscape Characterization for the Pacific Northwest,USA

We update the Wigington et al. (2013) hydrologic landscape (HL) approach to make it more broadly applicable and apply the revised approach to the Pacific Northwest (PNW; i.e., Oregon, Washington, and Idaho). Specific changes incorporated are the use of assessment units based on National Hydrography Dataset Plus V2 catchments, a modified snowmelt model validated over a broader area, an aquifer permeability index that does not require preexisting aquifer permeability maps, and aquifer and soil permeability classes based on uniform criteria. Comparison of Oregon results for the revised and original approaches found fewer and larger assessment units, loss of summer seasonality, and changes in rankings and proportions of aquifer and soil permeability classes. Differences could be explained by three factors: an increased assessment unit size, a reduced number of permeability classes, and use of smaller cutoff values for the permeability classes. The distributions of the revised HLs in five groups of Oregon rivers were similar to the original HLs but less variable. The improvements reported here should allow the revised HL approach to be applied more often in situations requiring hydrologic classification and allow greater confidence in results. We also apply the map results to the development of hydrologic landscape regions.     

An Analysis of Water Data Systems to Inform the Open Water Data Initiative

Improving access to data and fostering open exchange of water information is foundational to solving water resources issues. In this vein, the Department of the Interior's Assistant Secretary for Water and Science put forward the charge to undertake an Open Water Data Initiative (OWDI) that would prioritize and accelerate work toward better water data infrastructure. The goal of the OWDI is to build out the Open Water Web (OWW). We therefore considered the OWW in terms of four conceptual functions: water data cataloging, water data as a service, enriching water data, and community for water data. To describe the current state of the OWW and identify areas needing improvement, we conducted an analysis of existing systems using a standard model for describing distributed systems and their business requirements. Our analysis considered three OWDI‐focused use cases—flooding, drought, and contaminant transport—and then examined the landscape of other existing applications that support the Open Water Web. The analysis, which includes a discussion of observed successful practices of cataloging, serving, enriching, and building community around water resources data, demonstrates that we have made significant progress toward the needed infrastructure, although challenges remain. The further development of the OWW can be greatly informed by the interpretation and findings of our analysis.     

Estimating Evapotranspiration for Dryland Cropping Systems in the Semiarid Texas High Plains Using SWAT

The Soil and Water Assessment Tool (SWAT) is one of the most widely used watershed models for simulating hydrology in response to agricultural management practices. However, limited studies have been performed to evaluate the SWAT model's ability to estimate daily and monthly evapotranspiration (ET) in semiarid regions. ET values were simulated using ArcSWAT 2012 for a lysimeter field managed under dryland conditions at the USDA‐ARS Conservation and Production Research Laboratory at Bushland, Texas, and compared with measured lysimeter values from 2000 to 2010. Two scenarios were performed to compare SWAT's performance: (1) use of default plant leaf area index (LAI) values in the embedded plant database and (2) adjusted LAI values. Scenario 1 resulted in an “unsatisfactory” Nash‐Sutcliffe efficiency (NSE) of 0.42 and 0.38 for the calibration and validation periods, respectively. Scenario 2 resulted in a “satisfactory” NSE value for the calibration period while achieving a “good” NSE of 0.70 for the validation period. SWAT generally underestimated ET at both the daily and monthly levels. Overestimation during fallow years may be due to the limitations of the pothole function used to simulate furrow diking. Users should be aware of potential errors associated with using default LAI parameters. Inaccuracies in ET estimation may also stem from errors in the plant stress functions, particularly when evaluating water management practices for dryland watersheds.     

Artificially roughened solar air heater: A comparative study

Artificially roughened solar air heater has been topic in research for the last 30 years. Prediction of heat transfer and fluid flow processes of an artificially roughened solar air heater can be obtained by three approaches: theoretical, experimental, and computational fluid dynamics (CFD). This article provides a comprehensive review of the published literature on the investigations of artificially roughened solar air heater. In the present article, an attempt has been made to present holistic view of various roughness geometries used for creating artificial roughness in solar air heater for heat transfer enhancement. This extensive review reveals that quite a lot of work has been reported on design of artificially roughened solar air heater by experimental approach but only a few studies have been done by theoretical and CFD approaches. Finally this article presents a comparative study of thermo-hydraulic performance of 21 different types of artificial roughness geometries attached on the absorber plate of solar air heater in terms of thermo-hydraulic performance parameter. Heat transfer and friction factor correlations developed by various investigators for different types of artificially roughened solar air heaters have also been reported in this article.     

Optimal heat rejection pressure for transcritical CO2 refrigeration cycle with an expander

Heat rejection pressure plays an important role in designing a transcritical CO₂ refrigeration system, and it has an optimal value to maximize the system’s coefficient of performance (COP). With a thermodynamic simulation model, the optimal heat rejection pressure is studied in the paper for an expander cycle, as well as conventional throttle valve cycle. The effects of compressor efficiency, expander efficiency, gas cooler outlet temperature, and evaporation temperature on the optimal heat rejection pressure are analyzed. It is the first time for a transcritical CO₂ expander cycle that the optimal heat rejection pressure is correlated with the gas cooler outlet temperature and the evaporation temperature at given compressor efficiency and expander efficiency. The average deviation from the correlation to simulation results is less than 1.0%. The correlation provides a guideline to system development and performance optimization of a transcritical CO₂ expander cycle.     

Mathematical modelling and experimental validation of solar drying of mushrooms

This article presents two mathematical models for drying mushrooms considering the shrinkage effect. Both the models consider the physical changes of mushrooms during drying using the diffusion equation. A convective term is presented in the first model while, in the second model, the effective diffusion co-efficient is employed. Although the diffusion co-efficient is mainly dependent on the water content of the mushrooms, both models are suitable for analyzing the drying process. Moreover, in this study it has been demonstrated that both models are equivalent. The Genetic Algorithmic process was used to estimate the parameter values in different conditions. The information regarding the moisture content and the thickness evaluation taken from the models shows the best fit with the experimental data. The mathematical models developed to simulate the drying curve of mushroom have been evaluated and compared.     

环境管理的信息化视角——美国环境信息生命周期模型研究

有效、可靠的数据和信息是环境管理的基础和主线,是政府部门确定环境管理目标、衡量进展以及同所有利益相关方共享信息的基础。美国环保局(EPA)从整体视角和跨学科观点提出环境信息生命周期模型,能够更好地理解环境信息的生产者、管理者、提供者和使用者等不同角色的作用。本文介绍了环境信息生命周期模型的各环节和要素,包括政策、规划和项目,数据采集和管理,信息交换和共享,信息管理,发现、获取信息,理解、使用信息,用户/公众反馈等,用于评估环境管理业务的数据和信息需求,帮助提高数据质量,增强公众获取环境信息的能力。环保部门需要关注数据质量的不确定性以及不同部门之间缺乏信息共享的问题,将环境信息生命周期的方法融入中国的环境管理和信息化建设,将提高环境数据的质量和政府透明度。本文针对中国的环保信息化建设提出了若干政策建议。     

十溴联苯醚环境修复技术的研究进展

介绍了溴代阻燃剂十溴联苯醚（BDE-209）环境修复技术的研究进展。从光降解、零价铁降解、生物降解3个方面对BDE-209的降解机理和降解后的产物进行了介绍。BDE-209经光照、厌氧微生物、零价铁的脱溴作用后,降解成低溴代联苯醚产物;好氧微生物利用低溴代联苯醚作为生长碳源,将其在酶的作用下开环降解,进入三羧酸循环或彻底分解成CO₂和H₂O。提出应采用多种方法协同作用,更有效地降解多溴联苯醚化合物。     

Toward Integrative Management Advice of Water Quality, Oil Spills, and Fishery in the Gulf of Finland: A Bayesian Approach

Understanding and managing ecosystems affected by several anthropogenic stressors require methods that enable analyzing the joint effects of different factors in one framework. Further, as scientific knowledge about natural systems is loaded with uncertainty, it is essential that analyses are based on a probabilistic approach. We describe in this article about building a Bayesian decision model, which includes three stressors present in the Gulf of Finland. The outcome of the integrative model is a set of probability distributions for future nutrient concentrations, herring stock biomass, and achieving the water quality targets set by HELCOM Baltic Sea Action Plan. These distributions can then be used to derive the probability of reaching the management targets for each alternative combination of management actions.     

S-K型管式混合器-微絮凝高速过滤的实验研究

基于2种传统管式混合器的特点,研究了苏尔士-凯尼斯（S-K）新型组合管式混合器在预氧化-微絮凝高速过滤技术中的应用,对苏尔士（Sulzer）管式混合器、凯尼斯（Kenics）管式混合器及s-K型管式混合器高速过滤出水水质进行了对比分析,结果表明,S-K型微絮凝方式对浊度、COD及TP的平均去除率比其他2种混合器混合方式的去除效果提高了5％～10％,分别为80．3％、64．76％和51．15％。S-K型混合器过滤形成的絮体能够充分利用深层滤料,延长过滤周期。