油码头污染防治对策初探

随着石油化工企业规模的扩大和进出口油品的需要，海上油品运输量的比例越来越大，油码头的规模也在不断扩大。近年来油码头在储运过程中也经常发生一些环境污染事故。根据油码头储运过程中发生的环境问题，通过对油码头生产工艺流程、设备及储运过程中主要污染物产生来源的分析基础上，提出了油码头烃类大气污染物、含油污水、噪声等的污染防治措施。     

Performance-based earthquake evaluation of a full-scale petrochemical piping system

Assessment of seismic vulnerability of industrial petrochemical and oil & gas piping systems can be performed, beyond analytical tools, through experimental testing as well. Along this line, this paper describes an experimental test campaign carried out on a full-scale piping system in order to assess its seismic behaviour. In particular, a typical industrial piping system, containing several critical components, such as elbows, a bolted flange joint and a Tee joint, was tested under different levels of realistic earthquake loading. They corresponded to serviceability and ultimate limit states for support structures as suggested by modern performance-based earthquake engineering standards. The so called hybrid simulation techniques namely, pseudo-dynamic and real time testing with dynamic substructuring, were adopted to perform seismic tests. Experimental results displayed a favourable performance of the piping system and its components; they remained below their yielding, allowable stress and allowable strain limits without any leakage even at the Near Collapse Limit State condition for the support structure. Moreover, the favourable comparison between experimental and numerical results, proved the validity of the proposed hybrid techniques alternative to shaking table tests.     

高效油水分离器和过滤器处理油田污水的现场实验研究

为了开发高效、低耗的含油污水处理工艺技术和设备,在吉林油田新立采油厂,对石油大学（北京）研制开发的高效油水分离器和高效过滤器处理油田污水的技术性能进行了现场测试研究。油水分离器采用斜通道波纹板作内构件,过滤器用炉渣做滤料。现场实验表明：高效油水分离器和高效过滤器串联处理油田污水,不论污水含油量高低,其过滤器出口水中含油量不高于１０ｍｇ／Ｌ者达９４％：过滤器出口水中悬浮物不高于１０ｍｇ／Ｌ者占８６％。结果说明该套装置在油和悬浮物的脱除及操作方面性能优异。有推广应用前景。     

石化污水回用于循环冷却水技术

以处理后的石油化工污水为水源，开展了回用于工业循环冷却水的试验研究。针对回用污水的特点，研究了预膜、阻垢、缓蚀、杀菌等技术。达到了中石化循环冷却水运行“好”的要求。     

气浮装置在化工废水中的应用

针对某化工集团废水处理及回用工程采用气浮装置预处理化工废水,研究主要对气浮装置的原理、设计参数、药剂投加等进行实践与探讨。运行结果表明,在稳定运行阶段,可实现进水量2083 m3/h。进水CODcr平均浓度为600 mg/L,SS浓度为220 mg/L,石油类平均浓度为50 mg/L,处理出水CODcr≤490mg/L、SS≤46.2mg/L、石油类≤1mg/L。该工艺处理效果稳定,对悬浮物和石油类处理效果显著。     

Insight into the safety distance of ground and underground installations in typical petrochemical plants

Petrochemical plants are continuously turning into large-size corporations, the installations of facilities show a developing trend from ground to underground because of the difference in land using rate. In this regard, the safety distance of petrochemical equipment buried in both ground and underground cases were investigated based on risk assessment. As a case study, gasoline tank and LPG tank set on the ground and underground are singled out to compare the risks involved. The research showed that the setting case of installation had a great influence on safety distance. Two cases have 80% reduction of equivalent safety distance compared with the rest of the cases. It was found that when the gasoline storage tank was placed underground alone, the PLL value decreased by 36.7%. Only LPG tank was placed underground, and the PLL decreased by 6.33%, and the gasoline and LPG storage tanks were placed underground simultaneously, the PLL value declined by 42.3%. Thus, the layout of plants could be further optimized, which can greatly improve the performances of land use efficiency and safety. In addition, this paper, the selection of embedding methods and the sensitivity of underground case to overpressure was resumed from two aspects: soil properties and burial depth. For the soil properties, it was found that the water saturated sandy soil with high air content and the low density unsaturated sandy soil had better effects on weakening overpressure. Such properties are particularly beneficial to reducing the occurrence rate of accidents. In terms of burial depth, it can be observed that as the burial depth was changed from 0.5m to 1.1m, the value of overpressure has dropped dramatically. When the burial depth was 2m, the damage to personnel and buildings has been greatly reduced beyond 2m from the explosion center.     

吉林省城市大气降水pH值时空分异及成因

通过对吉林省８个代表城市１９９２－１９９７年大气降水观测数据的统计分析,对大气降水ＰＨ值的时空分异进行了探讨。结果表明：吉林省中西部城市大气降水基本呈中性;东部的图们,珲春两市大气降水酸化亚得,多年平均降水ＰＨ分别为５．１２和５．３８;全省碱性降水多集中在吉林市。     

吉林市城区土地利用对地下水污染空间分布的影响

利用吉林市城区91眼监测井2013年的地下水水质监测数据,采用改进内梅罗污染指数法求取地下水污染指数,同时考虑第二松花江两岸地下水污染的非连续性,采用Kriging方法进行分区插值,然后叠加融合得出城区地下水污染指数空间分布图.结合吉林市城区土地利用类型,采用CM模型和SLM模型提取监测井不同半径范围内的土地利用类型,利用多元回归分析方法确定监测井最可能受污染的范围,最后利用Kendall 秩次相关检验法和回归分析方法分析城区土地利用类型对地下水污染空间分布的影响.研究结果表明,吉林市城区地下水污染呈现出明显的空间分布特征;城区地下水受到不同程度的污染,其中江北片区和中心片区较为严重;在考虑地下水流动的情况下,监测井最可能受污染的范围为沿地下水流向方向500m;吉林市城区土地利用类型对地下水污染空间分布有较大影响,其中传统工业用地、居民和商业用地、城市交通设施用地为主要因素,其Kendall 秩次相关检验τ值分别为0.248、0.174、0.143;在各研究片区,该3种土地利用类型和地下水污染空间分布也存在较好的相关性.     

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.     

Modeling and optimizing efficiency gap between managers and operators in integrated resilient systems: The case of a petrochemical plant

The reliability issue in complex industrial systems such as oil, gas, petrochemical companies, nuclear and aviation industries has been of great importance. Resilience engineering (RE) is a new attitude toward the improvement of safety and reliability in the stated systems. One of the challenges a resilient system might face is the gap between work as imagined by managers and work as actually done by operators. This study will introduce a new framework named integrated resilience engineering (IRE) as a result of developing the concept of RE. The data used in this research have been obtained by means of questionnaire from a petrochemical company. Thereafter, the efficiency of operators and managers are calculated in RE and IRE frameworks through data envelopment analysis (DEA) approach. Then, the gaps between managers and operators are analyzed in two frameworks. The results are indicative of a significant growth in the number of efficient operators and managers in IRE framework compared to RE framework. Besides, the efficiency mean of managers and operators in IRE framework has experienced the growth of 1.8% and 5% compared to RE framework, respectively. The efficiency gap between managers and operators in IRE framework has also enjoyed the improvement of 88% compared to RE framework. Generally, it can be said that the suggested items of this research has led to the betterment of managers and operators’ efficiency and of the efficiency gap between them. Therefore, these items can improve the resilience and safety of complex systems. The results of Spearman test show that there is a strong direct correlation between the DEA results in two frameworks. This is the first study that examines the efficiency gap between operators and managers based on the RE principles and by means of DEA approach.