Influence of the geomembrane on time-lapse ERT measurements for leachate injection monitoring

Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. To quantify the water content and to evaluate the leachate injection system, in situ methods are required to obtain spatially distributed information, usually electrical resistivity tomography (ERT). However, this method can present false variations in the observations due to several parameters. This study investigates the impact of the geomembrane on ERT measurements. Indeed, the geomembrane tends to be ignored in the inversion process in most previously conducted studies. The presence of the geomembrane can change the boundary conditions of the inversion models, which have classically infinite boundary conditions. Using a numerical modelling approach, the authors demonstrate that a minimum distance is required between the electrode line and the geomembrane to satisfy the good conditions of use of the classical inversion tools. This distance is a function of the electrode line length (i.e. of the unit electrode spacing) used, the array type and the orientation of the electrode line. Moreover, this study shows that if this criterion on the minimum distance is not satisfied, it is possible to significantly improve the inversion process by introducing the complex geometry and the geomembrane location into the inversion tools. These results are finally validated on a field data set gathered on a small municipal solid waste landfill cell where this minimum distance criterion cannot be satisfied.     

Comparison of China’s Environmental Impact Assessment (EIA) Law with the European Union (EU) EIA Directive

In this paper, we first review the development of China’s Environmental Impact Assessment (EIA) system in the past 30 years. Then we compare the framework and operational procedures of China’s new EIA law with those of the EU EIA Directive. We also compare public participation, as well as sanctions and control in the two EIA systems. In addition, we identify where the processes in both EIA systems are similar or different from one another. By comparison, we noted that there are at least three obvious weaknesses in China’s EIA system: (1) the application of new models for EIA legislation; (2) the improvement of EIA guidance and education; and (3) the enhancement of public participation in EIA process. Our study indicates that these three major shortcomings should be overcome and improved in China’s EIA system, when compared with the EU EIA system.     

Inorganic nitrogen transformations in the treatment of landfill leachate with a high ammonium load: A case study

The inorganic nitrogen transformations occurring at a municipal waste leachate treatment facility were investigated. The treatment facility consisted of a collection well and an artificial wetland between two aeration ponds. The first aeration pond showed a decrease in ammonium (from 3480 (± 120) to 630(± 90) mg ⋅ L⁻¹), a reduction in inorganic nitrogen load (3480 to 1680 mg N ⋅ L⁻¹), and an accumulation of nitrite (< 1.3 mg-N ⋅ L⁻¹ in the collection well, to 1030 mg-N ⋅ L⁻¹). Incomplete ammonium oxidation was presumably the result of the low concentration of carbonate alkalinity (∼2 mg ⋅ L⁻¹), which may cause a limitation in the ammonium oxidation rate of nitrifiers. Low carbonate alkalinity levels may have been the result of stripping of CO₂ from the first aeration pond at the high aeration rates and low pH. Various chemodenitrification mechanisms are discussed as the reason for the reduction in the inorganic nitrogen load, including; the reduction of nitrite by iron (II) (producing various forms of gaseous nitrogen); and reactions involving nitrous acid. It is suggested that the accumulation of nitrite may be the result of inhibition of nitrite oxidizers by nitrous acid and low temperatures. Relative to the first aeration pond, the speciation and concentration of inorganic nitrogen was stable in the wetlands and 2nd aeration pond. The limited denitrification in the wetlands most probably occurred due to low concentrations of organic carbon, and short retention times.     

Evaluation of Point and Diffuse Sources of Nutrients in a River Basin on Base of Monitoring Data

The methodology of materials accounting is presented and applied to developing nutrient balance (nitrogen and phosphorus) in a river basin. The method is based on the balance principle: inputs and outputs of each nitrogen and phosphorus related sub-systems were balanced. The application of the methodology strategies was illustrated by means of a case study of the Krka river, Slovenia. Different pathways of emission to surface waters were taken into account: WWTP discharges, direct discharges, erosion/runoff and baseflow. Total annual emission into the river Krka was estimated to be 362 tonnes N/year and 73.3 tonnes P/year. The main sources of nitrogen are diffuse sources, emitted via baseflow (52%). Other important sources are effluents from WWTP, which account for 36% of total emissions. Other sources like erosion and direct discharges to surface water (animal manure, industry, households) are of lower magnitude. Erosion is main source of phosphorus emission (55% of total emission), WWTP effluents account for 37% of total emission, while other sources are less important. Besides reduction of point sources by means of wastewater collection and implementation of nutrient removal technology, managing agricultural nitrogen and phosphorus to protect water quality should become a major challenge in the Krka river basin.     

Implementing the European flood risk management plan

In response to the extreme flood events of recent decades, the European Union has released the Floods Directive (2007/60/EC), which requires the creation of flood risk management plans. These plans do not yet exist in practice, as water management agencies have until 2015 to put them into action. This contribution will discuss two questions regarding the European flood risk management plan: First, how is the new instrument integrated into the various member states, particularly with respect to the scenario approach? Second, how prepared are the institutions for the collaborative planning paradigm of the flood risk management plan, particularly with respect to the river basin districts approach? Citing examples from France, Germany, the Netherlands, and Great Britain, this paper offers both a pessimistic and an optimistic perspective on the implementation of the new flood risk management instrument.     

渗滤液回流对不同填埋结构甲烷变化规律的影响研究

建立了大型模拟填埋试验装置,研究了渗滤液回流对不同填埋结构甲烷变化规律的影响.每周对填埋气体中甲烷浓度进行监测.结果表明:厌氧填埋中回流操作使甲烷浓度峰值提前了147 d,峰值为59.6%(体积分数,下同);准好氧填埋中回流操作使甲烷浓度峰值提前259 d,峰值为44.7%.回流操作使甲烷产气高峰提前,增加产气量,加快填埋垃圾稳定,减轻渗滤液污染.厌氧填埋中进行回流操作有利于甲烷的回收利用;准好氧填埋结构可有效减少甲烷的排放,减小对环境的危害.稳定期的垃圾填埋体进行回流产生一定的甲烷,但浓度较低,最高仅26.0%,没有利用价值.     

用磷酸铵镁沉淀法去除沈阳老虎冲垃圾渗滤液中的氨氮

叙述了磷酸铵镁沉淀法去除垃圾渗滤液中氨氮的基本原理,分析了MAP法对氨氮的去除效果,对比了不同的镁盐及不同的反应时间对氨氮的去除效率。结果表明,MAP法对氨氮的去除效率高,产物中重金属的含量低。同时,氧化镁比氯化镁具有更好的氨氮去除综合优势。     

垃圾填埋场室内模拟试验注水量确定方法及其应用

针对填埋场室内模拟试验往往忽略降雨径流和初损的问题,提出运用SCS模型确定室内模拟试验日注水量的方法,并将计算结果应用于成都长安填埋场室内模拟试验中.结果表明,采用SCS模型计算所得的日入渗量进行注水的模拟柱渗滤液产量和水质变化能够更准确的模拟填埋场实际情况.     

厌氧-好氧生物反应器填埋工艺特性研究

基于生物反应器填埋技术,研究1种填埋场地循环操作的厌氧-好氧生物反应器填埋工艺,设计了该工艺模拟装置并研究了其运行工艺特性.厌氧阶段主要通过渗滤液回灌控制反应器工艺条件,主要试验结果为,pH值,R1在 6周后可上升至6.7～7.8,R2在17周内一直低于6.8;渗滤液COD浓度,R1在13周时下降至10?617 mg/L,R2在5周后上升至60?000 mg/L后长期趋于稳定;填埋气累计产量,R1在8周达到44%,R2几乎不产气.衡量稳定化可以分别采用渗滤液pH、COD浓度及BOD₅/COD的减少率、填埋气的累计产率等指标来判断,并据此转换为好氧填埋运行.好氧阶段主要是通过强制通风来减少恶臭和水分,主要试验结果为,通风19d氨气浓度降为1.16 mg/m³,通风23d后恶臭浓度降为19;通风14d后含水率降为26%.完成此阶段的工艺指标值可依据矿化垃圾开采的最终用途确定.对主要试验数据进行了数值模拟.厌氧-好氧填埋过程的微生物演替经RISA分析,有4个优势菌群,一些兼性菌群在厌氧-好氧阶段起着重要的承前启后作用.     

浅析垃圾渗滤液末端处理技术

从垃圾渗滤液的末端处理技术,即预处理、生物处理、后续处理三个方面分析了垃圾渗滤液的单独处理技术,并对渗滤液的回灌技术进行了论述。