Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

酒石酸淋洗过程中土壤重金属解吸动力学特征

采用批处理淋洗的方法,研究了酒石酸淋洗修复张士污灌区土壤过程中镉、铅、铜、锌4种重金属离子解吸动力学特征。结果表明,酒石酸在12h条件下,达到对污染土壤中镉离子的最大去除率,铅、铜、锌3种重金属离子达到最大去除率则需要24h。4种重金属离子的解吸动力学过程可以用Elovich方程很好的描述,说明酒石酸去除重金属离子的过程是一种非均相扩散过程。此外,解吸速率曲线显示,反应初期相同时刻上酒石酸对铅离子的解吸速率最快,其次是铜和锌,最后是镉离子;反应后期同一时刻上铜和锌的解吸速率大于铅和镉。     

Traffic climate and driver behaviors: The moderating role of driving skills in Turkey and China

Introduction: While road traffic accidents and fatalities are a worldwide problem, the rates of road traffic accidents and fatalities show differences among countries. Similarly, driver behaviors, traffic climate, and their relationships also show differences among countries. The aim of the current study is to investigate the moderating effect of driving skills on the relationship between traffic climate and driver behaviors by country. (Turkey and China). Method: There were 294 Turkish drivers and 292 Chinese drivers, and they completed the Traffic Climate Scale, the Driving Skills Inventory, and the Driver Behavior Questionnaire. The moderated moderation analyses were conducted with Hayes PROCESS tool on SPSS. Results: The results showed that safety skills moderated the relationship between internal requirements and violations both in Turkey and China. Safety skills also moderated the relationship between internal requirements and errors only in China and the relationship between functionality and violations in Turkey. Perceptual-motor skills moderated the relationships between external affective demands and errors, and also the relationship between internal requirements and positive driver behaviors in Turkey. It can be inferred that driving skills has different influences on traffic climate-driver behaviors relationship in different cultures and there might be cultural differences in the evaluation of drivers’ own driving skills. Practical Applications: Among driving skills, safety skills have a more critical role to increase road safety by decreasing number of violations. Interventions to increase safety skills of drivers might be promising for road safety.     

Effects of nitrogen and carbon dioxide on hydrogen explosion behaviors near suppression limit

By varying inert gas content, equivalence ratio and initial pressure, this study is aimed at investigating flame propagation behaviors and explosion pressure characteristics near suppression limit. For carbon dioxide, the weakest flame floating phenomenon is observed at Φ = 1.5 and the buoyant instability is enhanced when the equivalent ratio deviates to the rich and lean sides. For nitrogen, the buoyant instability decreases with increasing equivalent ratio. Both maximum explosion pressure and maximum pressure rise rate increase firstly and then decrease with the increase of equivalence ratio, and they decrease significantly with increasing content of carbon dioxide and nitrogen. For carbon dioxide, the critical suppression ratio of Φ = 0.6, 0.8, 1.0, 1.5 and 2.0 is 7.50, 7.18, 5.74, 3.83, and 2.87. For nitrogen, the critical suppression ratio of Φ = 0.6, 0.8, 1.0, 1.5 and 2.0 is 15.83, 11.87, 9.50, 6.33 and 4.75. Compared to nitrogen, the carbon dioxide is more effective on suppressing hydrogen explosion pressure. The adiabatic flame temperature, thermal diffusivity and mole fraction of active radicals continue to decrease with increasing content of carbon dioxide and nitrogen, which contributes to the decrease of laminar burning velocity.     

预处理垃圾焚烧飞灰作为碱胶凝材料混合材的研究

试验分析了垃圾焚烧飞灰的主要化学成分及矿物组成,探讨了预处理垃圾焚烧飞灰作为碱胶凝材料混合材的可能性.研究表明,垃圾焚烧飞灰主要由黏土类矿物组成,飞灰直接作为混合材参与水化过程会产生明显膨胀现象,加入30%(质量分数)飞灰制成的矿渣/飞灰试块在成型1 d脱膜时膨胀率达到15.7%,标准养护28 d后无侧压抗压强度只有12.4 MPa.对飞灰进行热活化预处理,900℃条件下活化效果最佳,同样的飞灰掺量下,试块在标准养护28 d后无侧压抗压强度达到46.0 MPa,膨胀现象消失,且碱胶凝材料中重金属稳定性良好.     

The importance of ammonium mobility in nitrogen-impacted unfertilized grasslands: A critical reassessment

The physico-chemical absorption characteristics of ammonium-N for 10 soils from 5 profiles in York, UK, show its high potential mobility in N deposition-impacted, unfertilized, permanent grassland soils. Substantial proportions of ammonium-N inputs were retained in the solution phase, indicating that ammonium translocation plays an important role in the N cycling in, and losses from, such soils. This conclusion was further supported by measuring the ammonium-N leaching from intact plant/soil microcosms. The ammonium-N absorption characteristics apparently varied with soil pH, depth and soil texture. It was concluded for the most acid soils especially that ammonium-N leached from litter horizons could be seriously limiting the capacity of underlying soils to retain ammonium. Contrary to common opinion, more attention therefore needs to be paid to ammonium leaching and its potential role in biogeochemical N cycling in semi-natural soil systems subject to atmospheric pollution.     

Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.     

企业安全文化评估与企业安全行为的质化研究

通过总结国内外各种不同的安全文化概念,归纳分析了国内外较为流行的近10种安全文化建立模式。在研讨文献的基础上,通过深入访谈、焦点小组与参与观察,归纳构造了一套共11个维度,总题项为152题的安全文化评估量表。通过对选定企业的实证问卷调查,进行统计分析,采用多元逐步回归分析等方法对安全文化各评核因素及整体安全文化进行预测,并以百分数呈现其整体的安全文化现状水平。通过基于扎根理论的各种质化研究方法,对案例企业的安全文化建设和企业安全行为进行研究,得到了7点关于企业安全行为的研究发现,并提出了相应的改进建议。     

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)