磁性PEI功能化秸秆的制备及对Pb (Ⅱ)的吸附

为获得同时具有优良的吸附性能和磁分离特性的生物吸附材料,以汽爆秸秆为基质,采用戊二醛交联剂法制备了磁性聚乙烯亚胺功能化秸秆吸附剂（Fe₃O₄-PEI-RS）,通过SEM、XRD、FTIR、XPS和VSM等手段表征了材料的结构和性质,测定了Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附性能,考察了pH、吸附时间、吸附剂投加量、Pb（Ⅱ）初始浓度、温度等因素对吸附的影响.结果表明,Fe₃O₄-PEI-RS对Pb（Ⅱ）的吸附具有强烈的pH依赖性;吸附时间对Pb（Ⅱ）的吸附效率有明显的影响,在180 min时吸附达到平衡,吸附过程符合准二级动力学模型;Langmuir和Freundlich模型都能很好地描述Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附行为,20、30和40℃时最大吸附量分别为192.31、200.00和212.77 mg/g;热力学参数△G < 0,而焓变△H>0、△S>0,说明该吸附属于熵增加的自发吸热反应过程,升温有利于吸附.重复试验表明,EDTA作解吸剂,经5次吸附/解吸附循环后吸附剂仍能保持较高的吸附容量.研究显示,所制Fe₃O₄-PEI-RS对Pb（Ⅱ）具有较高的吸附容量,稳定性好、可循环利用,能在磁场下实现快速分离.      

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes morem hallenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

深部储层中CO2沿断层泄漏量的影响因素

CGS（CO₂地质储存）是CO₂减排的重要手段之一,天然裂隙的存在则是CGS的潜在风险.CO₂地质储存过程中储层上覆盖层及其浅部含水层是防止CO₂泄漏的天然屏障,为了探究深部咸水层中CO₂沿断层的泄漏过程并获得断层渗透率及储层中超临界CO₂流体初始条件（初始饱和度、初始泄漏压力）对CO₂沿断层泄漏速率和泄漏量的影响程度,依据鄂尔多斯CO₂灌注工程示范区资料,使用多相、多组分溶质运移数值模拟软件TOUGH2建立了2D概念模型.结果表明,深部咸水层中的CO₂在压力差和浓度差的作用下沿断层发生泄漏,到达浅部含水层后开始发生侧向运移,100 a内运移了约200 m的水平距离;由于浮力的作用,CO₂集中在含水层顶板处,有效地防止了CO₂向外泄漏.影响因素分析表明,100 a内断层渗透性能为低渗、中渗和高渗条件时,CO₂累积泄漏量分别为0、1 050和3 000 t;CO₂初始饱和度分别为0.20、0.50和0.99时,CO₂累积泄漏量分别为550、1 050和1 650 t;初始泄漏压力分别为17.3、17.6和18.1 MPa时,CO₂累积泄漏量则分别为900、1 050和1 400 t.除此之外,断层渗透性、CO₂初始气体饱和度和初始泄漏压力对CO₂泄漏的影响还体现在泄漏发生时间和平均泄漏速率上.研究显示,各因素对CO₂沿断层泄漏过程的影响程度表现为断层渗透性能> CO₂初始饱和度> CO₂初始泄漏压力.      

基于ES-VSP分布的交通状态对公交车动态排放的影响

为评估不同交通状态下公交车运行特征和排放水平的差异,现场采集广州市B9、226线路公交车的逐秒GPS数据,以ES-VSP（发动机负荷-机动车比功率）分布表征畅通、轻度拥堵和中度拥堵下的公交车运行特征,结合IVE（international vehicle emission）模型求得公交车平均排放因子并分析其差异.结果表明:①所测公交车的发动机低负荷区中bin11（-1.6 < ES ≤ 3.1,-2.9 kW/t ≤ VSP < 1.2 kW/t）频率范围为50.55%~83.39%,中度拥堵时bin 11频率是畅通时的1.1~1.3倍;② 3种交通状态下公交车的CO、VOC（运行产生的挥发性有机物）、VOC_evap（蒸发产生的挥发性有机物）、NO_x（氮氧化物）和PM（颗粒物）平均排放因子范围分别为7.63~11.40、0.26~0.46、0.68~1.56、0.32~0.51和0.72×10-2~1.28×10-2 g/km;③同种交通状态下,主干路公交车专用道和BRT车道的公交车的大部分污染物平均排放因子低于次干路混行车道、主干路混行车道,中度拥堵时主干路BRT车道的CO、VOC、VOC_evap、NO_x和PM平均排放因子相对其他道路最低,分别为7.66、0.27、0.87、0.32和0.75×10-2 g/km;④次干路混行车道、主干路混行车道的公交车污染物平均排放因子随交通状态愈加拥堵而增大,但畅通时主干路BRT车道的公交车行驶速度、加速度较高,导致CO平均排放因子较高,对应3种交通状态其比例为1.0:0.9:0.8.研究显示,交通状态对公交车运行和排放具有显著影响.      

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

湖北省PM2.5与PM10比值分析及PM2.5时空分布特征研究

基于2012年-2014年湖北省大气污染物监测数据,通过数据反演方法,得到湖北省17个城市的PM2.5年均浓度.利用ArcGIS绘制出各城市不同年份的颗粒物浓度空间分布图,并对其进行分析.结果表明,2012年-2014年间,湖北省17个城市PM2.5与PM10年均浓度比值为0.66,PM2.5年均浓度超出国家二级标准,整体呈现上升趋势.城市方面,在多数城市PM2.5与PM10浓度上升的同时,仅武汉、黄冈和天门3个城市颗粒物浓度2014年较2013年有所下降,且武汉市PM2.5浓度下降率达12.8%,表明武汉市近两年来采取的政策措施具有较好的可行性和有效性.