氮掺杂氧化钛的简易制备及可见光催化活性的研究

为开发对可见光响应的催化剂,以尿素为氮掺杂剂,采用简易溶胶-凝胶法制备氮掺杂氧化钛,并以2,4-DCP的降解检验其光催化活性。XRD、BET、XPS和UV-Vis漫反射光谱分析表明,随着氮/钛原子比（N/Ti)的增大,各催化剂晶粒尺寸减小,比表面积增大,锐钛矿相向金红石相的转变得到抑制,除0#样品出现金红石相外,其他催化剂均只出现锐钛矿相;掺入催化剂的N位于晶格O位点和晶格间隙,替代N和间隙N掺杂使催化剂的光吸收发生明显的红移。荧光光谱分析表明,当N/Ti在0～6范围内增加时,反应体系中·OH自由基的产生速率增加,当N/Ti增大至8时,速率则下降。相似的规律也表现在氮掺杂量对光催化活性的影响。适量氮掺杂能增强氧化钛的可见光催化活性,该改性催化剂可用于有机污染物的太阳光激催化降解。     

新型转式垃圾焚烧过程中脱氯脱硫机理的研究

为了探讨有机垃圾焚烧过程钙基添加剂对HCl,SO_x生成特性的影响,分别在自行设计的中空水冷转式垃圾焚烧炉和固定床加热炉中进行了一系列的实验,研究结果表明新型转式焚烧炉具有强化传热传质特性,能提高HCl、SO_x的脱除率,可抑制有害气体的生成;同时也研究了 HCl,SO₂气体同时存在时,钙基添加剂对脱氯脱硫效率的影响规律。     

Teachers' conceptions of nature and environment in 16 countries

By using an original framework involving complementary statistical approaches, we investigated the environmental attitudes of 6379 pre-service and in-service teachers in 16 countries of Europe and its neighbourhood. To test hypotheses about the nature of environmental attitudes, we examined the variation across groups of individuals (between-class analysis), investigated the independent effects of several candidate explanatory factors (orthogonal analysis), and finally inspected potential relationships between conceptions on a variety of topics (co-inertia analysis).     

臭氧同时脱硫脱硝技术研究进展

对利用臭氧同时脱硫脱硝技术进行了综述,分析了臭氧对NOx的脱除机理。臭氧同时脱硫脱硝技术具有明显的一体化脱除特性,但臭氧的发生费用却制约了它的应用。介绍了目前国外在工程上应用的低温氧化技术（LOTOX）,分析了其脱除效果及优缺点。     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

Power generation with CO2 capture: Technology for CO2 purification

The goal of this paper is to find methodologies for removing a selection of impurities (H₂O, O₂, Ar, N₂, SO_x and NO_x) from CO₂ present in the flue gas of two oxy-combustion power plants fired with either natural gas (467 MW) or pulverized fuel (596 MW). The resulting purified stream, containing mainly CO₂, is assumed to be stored in an aquifer or utilized for enhanced oil recovery (EOR) purposes. Focus has been given to power cycle efficiency i.e.: work and heat requirements for the purification process, CO₂ purity and recovery factor (kg of CO₂ that is sent to storage per kg of CO₂ in the flue gas). Two different methodologies (here called Case I and Case II) for flue gas purification have been developed, both based on phase separation using simple flash units (Case I) or a distillation column (Case II). In both cases purified flue gas is liquefied and its pressure brought to 110 atm prior to storage.Case I: A simple flue gas separation takes place by means of two flash units integrated in the CO₂ compression process. Heat in the process is removed by evaporating the purified liquid CO₂ streams coming out from both flashes. Case I shows a good performance when dealing with flue gases with low concentration of impurities. CO₂ fraction after purification is over 96% with a CO₂ recovery factor of 96.2% for the NG-fired flue gas and 88.1% for the PF-fired flue gas. Impurities removal together with flue gas compression and liquefaction reduces power plant output of 4.8% for the NG-fired flue gas and 11.6% for the PF-fired flue gas. The total amount of work requirement per kg stored CO₂ is 453 kJ for the NG-fired flue gas and 586 kJ for the PF-fired flue gas.Case II: Impurities are removed from the flue gas in a distillation column. Two refrigeration loops (ethane and propane) have been used in order to partially liquefy the flue gas and for heat removal from a partial condenser. Case II can remove higher amounts of impurities than Case I. CO₂ purity prior to storage is over 99%; CO₂ recovery factor is somewhat lower than in Case I: 95.4% for the NG-fired flue gas and 86.9% for the PF-fired flue gas, reduction in the power plant output is similar to Case I.Due to the lower CO₂ recovery factor the total amount of work per kg stored CO₂ is somewhat higher for Case II: 457 kJ for the NG-fired flue gas and 603 kJ for the PF-fired flue gas.     

Model prediction on the rise of pCO2 in uniform flows by leakage of CO2 purposefully stored under the seabed

A numerical study was conducted to predict pCO₂ change in the ocean on a continental shelf by the leakage of CO₂, which is originally stored in the aquifer under the seabed, in the case that a large fault connects the CO₂ reservoir and the seabed by an earthquake or other diastrophism. The leakage rate was set to be 6.025 × 10⁻⁴ kg/m²/sec from 2 m × 100 m fault band, which corresponds to 3800 t-CO₂/year, referring to the monitored seepage rate from an existing EOR field. The target space in this study was limited to the ocean above the seabed, the depth of which was 200 or 500 m. The computational domain was idealistically rectangular with the seabed fault-band perpendicular to the uniform flow. The CO₂ takes a form of bubbles or droplets, depending on the depth of water, and their behaviour and dissolution were numerically simulated during their rise in seawater flow. The advection–diffusion of dissolved CO₂ was also simulated. As a result, it was suggested that the leaked CO₂ droplets/bubbles all dissolve in the seawater before spouting up to the atmosphere, and that the increase in pCO₂ in the seawater was smaller than 500 μ atm.     

地下饮用水中痕量NO2-的催化动力学法测定

报道了一种新的测定NO2-的高选择性和高灵敏度的催化光度分析法.基于H3PO4介质中,碘绿与溴酸钾的氧化还原反应受亚硝酸盐的催化使碘绿褪色.据此建立了测定NO2-的新方法.本方法检出限为0.29μg/L,该方法用于地下饮用水、环境标样的测定,相对标准偏差为1.05%～4.80%,加标回收率为95%～117%.     

空气和废气监测中H2S标液的选择

有2种不同方法制备的H2S标准溶液进行测定,结果表明,所得标准曲线斜率一致,因此,在实际工作中可对其灵活运用。     

5—(4—磺酸基苯偶氮)8—(2,4—二硝基苯氨基)喹啉测定食品中铜的研究应用

在弱碱性介质中 ,5— (4—磺酸基苯偶氮 ) 8— (2 ,4—二硝基苯氨基 )喹啉 (SPDNPAQ)与铜反应生成 2∶ 1紫红色络合物 ,体系 λmax=56 0 nm,ε=1.2 3× 10 5L· mol-1· cm-1。铜含量在 0～ 0 .4 mg/ L内符合比耳定律 ,方法用于一些生物样品和水样中铜的测定。