Emissions associated with meeting the future global wheat demand: A case study of UK production under climate change constraints

Climate change, population growth and socio-structural changes will make meeting future food demands extremely challenging. As wheat is a globally traded food commodity central to the food security of many nations, this paper uses it as an example to explore the impact of climate change on global food supply and quantify the resulting greenhouse gas emissions. Published data on projected wheat production is used to analyse how global production can be increased to match projected demand. The results show that the largest projected wheat demand increases are in areas most likely to suffer severe climate change impacts, but that global demand could be met if northern hemisphere producers exploit climate change benefits to increase production and narrow their yield gaps. Life cycle assessment of different climate change scenarios shows that in the case of one of the most important wheat producers (the UK) it may be possible to improve yields with an increase of only 0.6% in the emission intensity per unit of wheat produced in a 2 °C scenario. However, UK production would need to rise substantially, increasing total UK wheat production emissions by 26%. This demonstrates how national emission inventories and associated targets do not incentivise minimisation of global greenhouse gas emissions while meeting increased food demands, highlighting a triad of challenges: meeting the rising demand for food, adapting to climate change and reducing emissions.     

Ecomanagement of biodiversity and ecosystem functioning in the Mediterranean Sea: concerns and strategies

Marine biodiversity is generally higher in benthic than in pelagic systems, and in coastal than in open sea systems. Sediments are the most human-impacted domain and therefore represent the target zone for both the study and actions needed for the preservation of biodiversity. Losses of marine diversity, higher (or simply more evident) in coastal areas, are generally the result of conflicting uses of coastal habitats. Large difficulties arise from the analysis and evaluation of the actual biodiversity, especially when different environments are compared, as often studies on biodiversity are dependent upon the distribution of the specialists. On the other hand, losses of marine biodiversity might be underestimated, due to the limited knowledge of the ecosystems' functioning, of the species inhabiting various habitats and of the still limited capacity to assess microbial biodiversity, which represents the largest fraction of the global marine biodiversity. Finally, claimed losses of biodiversity might be just apparent, as the sea floor is a bank of resting stages of various plankton species that are likely to spend even decades in the sediment before reactivating and inducing unattended blooms in the water column. The Mediterranean Sea displays high species diversity, but might reach the highest values in terms of adaptive strategies and functional diversity. Moreover, the Mediterranean Sea represents also a key area for the study of the relative influences of the natural and anthropogenic changes on biodiversity and its consequences on ecosystem functioning. Habitat destruction, over-fishing, contaminants, eutrophication, introduction of alien species, and climate changes are producing increasingly evident changes in community structure and biodiversity of this warm and miniature ocean. We summarized the main effects of different disruptive agents on the marine biodiversity of the Mediterranean Sea, with special attention on the biodiversity relevance in ecosystem functioning and possible implications in bio-geochemical cycles. The present overview aims at focusing and synthesizing the most important factors potentially affecting the interactions between biodiversity and ecosystem functioning in the Mediterranean in order to better define possible strategies of conservation and eco-management.     

Modeling Streamflow and Water Quality Sensitivity to Climate Change and Urban Development in 20 U.S. Watersheds

Watershed modeling in 20 large, United States (U.S.) watersheds addresses gaps in our knowledge of streamflow, nutrient (nitrogen and phosphorus), and sediment loading sensitivity to mid‐21st Century climate change and urban/residential development scenarios. Use of a consistent methodology facilitates regional scale comparisons across the study watersheds. Simulations use the Soil and Water Assessment Tool. Climate change scenarios are from the North American Regional Climate Change Assessment Program dynamically downscaled climate model output. Urban and residential development scenarios are from U.S. Environmental Protection Agency's Integrated Climate and Land Use Scenarios project. Simulations provide a plausible set of streamflow and water quality responses to mid‐21st Century climate change across the U.S. Simulated changes show a general pattern of decreasing streamflow volume in the central Rockies and Southwest, and increases on the East Coast and Northern Plains. Changes in pollutant loads follow a similar pattern but with increased variability. Ensemble mean results suggest that by the mid‐21st Century, statistically significant changes in streamflow and total suspended solids loads (relative to baseline conditions) are possible in roughly 30‐40% of study watersheds. These proportions increase to around 60% for total phosphorus and total nitrogen loads. Projected urban/residential development, and watershed responses to development, are small at the large spatial scale of modeling in this study.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.     

江苏省太湖流域农村生活污水处理技术评价

农村生活污水处理技术种类繁多,实际应用效果参差不齐,且各类技术缺乏对实际工程实施的指导。针对江苏省太湖流域农村生活污水排放特点,研究了毛细管渗滤沟处理技术、厌氧池-人工湿地组合工艺、厌氧滤池-氧化塘-生态渠技术、SBR-化学除磷和膜生物反应器等技术的工艺参数、处理效果、投资估算和操作管理要求,并对各项技术进行综合评估。针对不同的污水处理规模,总结不同地区相应的推荐处理技术。     

Assessment of Eutrophication in Estuaries: Pressure–State–Response and Nitrogen Source Apportionment

A eutrophication assessment method was developed as part of the National Estuarine Eutrophication Assessment (NEEA) Program. The program is designed to improve monitoring and assessment of eutrophication in the estuaries and coastal bays of the United States with the intent to guide management plans and develop analytical and research models and tools for managers. These tools will help guide and improve management success for estuaries and coastal resources. The assessment method, a Pressure-State-Response approach, uses a simple model to determine Pressure and statistical criteria for indicator variables (where applicable) to determine State. The Response determination is mostly heuristic, although research models are being developed to improve that component. The three components are determined individually and then combined into a single rating. Application to several systems in the European Union (E.U.), specifically in Portugal, shows that the method is transferable, and thus is useful for development of management measures in both the Unites States and E.U. This approach identifies and quantifies the key anthropogenic nutrient input sources to estuaries so that management measures can target inputs for maximum effect. Because nitrogen is often the limiting nutrient in estuarine systems, examples of source identification and quantification for nitrogen have been developed for 11 coastal watersheds on the U.S. east coast using the WATERSN model. In general, estuaries in the Northeastern United States receive most of their nitrogen from human sewage, followed by atmospheric deposition. This is in contrast to some watersheds in the Mid-Atlantic (Chesapeake Bay) and South Atlantic (Pamlico Sound), which receive most of their nitrogen from agricultural runoff. Source identification is important for implementing effective management measures that should be monitored for success using assessment methods, as described herein. For instance, these results suggest that Northeastern estuaries would likely benefit most from improved sewage treatment, where as the Mid and South Atlantic systems would benefit most from agricultural runoff reductions.     

Life cycle assessment analysis of active and passive acid mine drainage treatment technologies

Acid mine drainage (AMD), resulting from open-cast coal mining, is currently one of the largest environmental challenges facing the mining industry. In this study, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts associated with the construction, operation and maintenance of different AMD treatment options typically employed. LCA is a well-reported tool but is not documented for AMD treatment systems despite their ubiquitous implementation worldwide. This study conducted detailed LCA analysis for various passive and active AMD treatment approaches implemented or considered at a major coal mine in New Zealand using a comparative functional unit of kg acidity removed per day for each treatment option. Eight treatment scenarios were assessed including active limestone and hydrated lime treatments, and compared to passive treatments using limestone and waste materials such as mussel shells. Both midpoint and endpoint LCA impact categories were assessed. Generally, the active treatment scenarios demonstrated greater LCA impacts compared to an equivalent level of treatment for the passive treatment approaches. Lime slaking had the greatest LCA impacts, while passive treatment approaches incurred consistently less impacts except for one passive treatment with a purchased energy scenario. A 50% reduction in transportation distances resulted in the lowest LCA impacts for all scenarios. This study highlights the importance of evaluating the environmental and social impacts of AMD treatment for the mining industry.     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.     

Environmental assessment of two home composts with high and low gaseous emissions of the composting process

A Life Cycle Assessment (LCA) of two home composts with low and high gaseous emissions of the composting process is presented. The study focused on the gaseous emissions of the composting process. Gaseous emissions of methane, nitrous oxides, ammonia and volatic organic compounds of the composting process were experimentally measured in field real trials. The results showed that the differences in gaseous emissions between the two home composts were 4.5, 5.8 and 52 for methane, nitrous oxides and ammonia, respectively. Higher emissions of nitrous oxides and methane affected significantly the category of global warming potential, while higher emissions of ammonia affected mainly the categories of acidification potential, eutrophication potential and photochemical oxidation. The differences found in the compost emissions were attributable to the composting production management (quality and composition of waste stream, frequency mixing of waste, humidity and temperature monitoring, among others) as well as weather conditions (temperature and humidity).     

Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of ?58 kg CO₂-eq to a relatively large burden of 408 kg CO₂-eq, with 294 kg CO₂-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO_x process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.