高原环境因素对涂层自然老化性能的影响

对青藏高原地区主要环境特点进行了概述,对高原地区典型环境特性(太阳辐射强度、温度、湿度)进行了分析研究,重点探讨了太阳辐射强度和温度对涂层老化的影响,分析了青藏高原典型地区1981-2008年地面交换站累年平均日照时数、地面气温、降水量等环境因素对涂层老化机理的影响,为开展涂层环境适应性研究提供了理论研究基础和科学依据...     

Modelling of light pollution in suburban areas using remotely sensed imagery and GIS

This paper describes a methodology for modelling light pollution using geographical information systems (GIS) and remote sensing (RS) technology. The proposed approach attempts to address the issue of environmental assessment in sensitive suburban areas. The modern way of life in developing countries is conductive to environmental degradation in urban and suburban areas. One specific parameter for this degradation is light pollution due to intense artificial night lighting. This paper aims to assess this parameter for the Athens metropolitan area, using modern analytical and data capturing technologies. For this purpose, night-time satellite images and analogue maps have been used in order to create the spatial database of the GIS for the study area. Using GIS advanced analytical functionality, visibility analysis was implemented. The outputs for this analysis are a series of maps reflecting direct and indirect light pollution around the city of Athens. Direct light pollution corresponds to optical contact with artificial night light sources, while indirect light pollution corresponds to optical contact with the sky glow above the city. Additionally, the assessment of light pollution in different periods allows for dynamic evaluation of the phenomenon. The case study demonstrates high levels of light pollution in Athens suburban areas and its increase over the last decade.     

2种海水轮虫对UV-B辐射敏感性的比较

运用生态毒理学方法研究了褶皱臂尾轮虫(Brachionus plicatilis)和壶状臂尾轮虫(B.urceolaris)对UV-B辐射的敏感性。结果表明:UV-B辐射对轮虫有较大的伤害作用,且当辐射强度达一定阈值会对其产生急性致死作用。UV-B辐射对褶皱臂尾轮虫24、48和96 h的半致死剂量分别为4.393、2.694和1.720 kJ/m2,对壶状臂尾轮虫24、48和96 h的半致死剂量分别为5.856、4.516和1.730 kJ/m2;而UV-B辐射对2种轮虫的急性致死强度阈值均为(50±10)μW/cm2。由此可以看出,在实验所用的UV-B辐射强度剂量范围内,褶皱臂尾轮虫在UV-B辐射处理后的24和48 h对UV-B辐射的敏感性要大于壶状臂尾轮虫,而在处理后的96 h,2种轮虫对UV-B辐射的敏感性则无显著差别。     

Inverse modeling to estimate LNAPL plume release timing

Methodologies are presented for dating releases of light nonaqueous phase liquids (LNAPLs) using an inverse modeling approach with simple analytical models. Models for LNAPL plume migration are presented to predict LNAPL plume velocity in the unsaturated and saturated zones as a function of basic soil and fluid properties. A relative mobility factor is introduced for LNAPL movement at the water table that depends primarily on the van Genuchten n parameter (related to the breadth of the soil pore size distribution) and the magnitude of water table fluctuations. Estimated LNAPL plume velocities compare reasonably with more rigorous numerical models, which may be used in cases where data availability warrant the greater effort entailed.Two methods of estimating release timing and its uncertainty are investigated. A direct estimation method is described that determines travel time for a single observed travel distance based on estimated soil and fluid properties. Release date uncertainty may be determined using the first order (FO) or Monte Carlo (MC) methods. The second method for estimating release date involves nonlinear parameter estimation utilizing distance vs. time measurements and other data.A case study is presented for a field site where independent estimates of release timing were obtained from a numerical modeling analysis. Release timing estimates based on direct inversion of the analytical timing model agree well with the numerical analysis. Results for a second field site indicate that release date confidence limits estimated by the FO method, assuming log-normally distributed travel times, are close to values determined by the MC method, which makes no assumption regarding the form of the travel time probability distribution.Results for a hypothetical problem indicate that LNAPL velocity and travel time may be accurately estimated if sufficient data on travel distance vs. time are available. Incorporating prior information on relevant soil and fluid properties into the objective function reduces the uncertainty in release date if prior estimates are accurate. However, biased prior estimates may lead to over- or underestimation of release date uncertainty. Simultaneous estimation of soil and fluid properties and release date is possible if prior information is available to condition the parameter estimates.     

微孔盘曝气系统中悬浮填料挂膜特征研究

在微孔盘曝气系统中,针对悬浮填料挂膜过程,展开中试试验研究。试验结果表明,在HRT仅1h的连续流曝气系统中,悬浮填料挂膜快。曝气强度不同,悬浮填料挂膜特性和生物膜量以及对COD的去除效果相差很大。试验发现微孔盘曝气系统中悬浮填料的最适宜曝气强度范围为8～10m3/(m2·h),在此范围内,系统的溶解氧为3.9～5.2mg/L,生物膜量为3.3～3.5g/L,对COD的去除率在70%～80%。在上述基础上还对不同型号的悬浮填料进行了优选。     

低温等离子体法去除苯和甲苯废气性能研究

对低温等离子体法去除苯和甲苯废气的性能进行了探讨,在理论分析的基础上进行实验研究。低温等离子体法去除苯和甲苯的机理是放电反应产生的高能电子与苯和甲苯分子发生非弹性碰撞并将能量全部或部分传递给目标分子,使其裂解、激化。被裂解、激化的分子与臭氧、活性基团发生一系列物理、化学反应后生成二氧化碳、一氧化碳和水。实验结果表明,苯和甲苯的去除率随着电场强度的增强而增大,随着气体流速的增大而减小。在较高电场强度下,有钛酸钡填料的反应器比无填料的反应器对苯和甲苯的去除率高得多,苯最高去除率可达92 6%,甲苯可达到96 8%。相同条件下甲苯比苯更容易去除。     

赶不上定理及其循环经济理论意义

阐释了在一个正常发展的长时期的宏观经济体系中人均物质消费量永远上升的观点,研究了人均GDP增长速度和物质利用强度变化速度之间的数量关系,根据二者变化速度相对快慢提出和证明了保证人均物质消费量上升的充分必要条件即赶不上定理.利用赶不上定理,论述了循环经济是解决人类经济增长的无限性与自然资源有限性之间的矛盾的根本途径,当人均GDP增长速度为零时进行结构调整必然降低人均物质消费量,引发社会不安定现象;当人均GDP增长速度足够快时,可以大幅度进行结构调整而不降低人均物质消费量.     

城市大气稳定度分级模型的研究

应用大气扩散模型计算大气污染物浓度时 ,大气稳定度的确定非常重要。综合考虑气温和总云量与日照强度之间的关系 ,建立了大气稳定度分级的模糊数学法 ;证明了应用该方法求大气稳定度的精度明显高于应用其它方法的精度 ;编写了简单适用的计算机程序 ,大大方便了该模型的应用。     

煤氧复合热效应的影响因素分析

煤的氧化放热是引起煤自燃的主要原因。煤氧复合热效应与耗氧速率和表面反应热有关。通过分析得出 ,q(z,n,CO2 ,T,d5 0 ) =h(Z) .g(n) .f (CO2 ) .I(T) .Ψ (d5 0 )。其中主要影响因素为煤结构、温度、氧浓度及粒度。根据威斯化学结构模型、本田化学结构模型及煤分子中包含的 7种表面活性结构 ,推出煤自燃表面分子结构模型 ,并分析其表面活性结构的种类、数量、活泼性 ,它们随煤体不同而千差万别 ;表面活性结构随温度变化的氧化活泼性及反应过程不同 ,造成煤表面氧化反应热 H不同。外在主要影响因素—煤的温度、氧浓度、粒度不同造成了耗氧速率 VO2 不同 ,使煤的放热强度不同。对此 ,通过 XK型煤自然发火实验台及 XKS程序升温实验台进行了实验分析     

多波段激光防护塑料的研制

本文以PMMA为基质制备了多波段激光防护塑料样品,对其性能进行了测试,该样品对YAG激光有很好的防护作用,达到实用要求。