液液萃取-高效液相色谱法同时测定水中甲萘威和阿特拉津

用二氯甲烷萃取水中的甲萘威和阿特拉津,经旋转蒸发和氮吹富集浓缩后,采用高效液相色谱二极管阵列检测器在222 nm波长下测定。甲萘威和阿特拉津在0.100 mg/L～5.00 mg/L范围内线性良好,检出限分别为0.031 μg/L和0.027 μg/L,空白水样加标平均回收率为78.5%～91.7%,平行测定3次的RSD＜5%。     

Numerical simulation of evaporation of volatile liquids

The paper presents the results of the validation of the developed pool evaporation model using literature and our own experimental data. The proposed model was used to examine the effect of wind velocity and pool sizes on the evaporation rate of volatile liquid (hexane). Contrary to the semi-empirical evaporation model widely used in hazard assessment, stronger dependence of evaporation rate on pool size at low wind speeds is obtained.     

Fire accident investigation of an explosion caused by static electricity in a propylene plant

This study investigated a 2010 fire and explosion that occurred at a polypropylene (PP) and copper-clad laminate high-tech plant in Taiwan. Liquid acetone leakage caused the fire and explosion. One person was killed and five were injured; property damage was estimated at US$20 million. In contrast to conventional plants, high-tech plants have sophisticated instrumentation, highly complex pipelines, and confined spaces. In addition, the floor area in a high-tech plant is large and frequently contains a channel through the ground floor to the second or third floor. This channel design enables the fire compartment to be destroyed. Therefore, the system cannot confine the fire to a specific area, thus hindering fire-relief operations. In this study, the original fire outbreak occurred in the PP processing area on the ground floor. The acetone storage tank was located on the third floor. The investigation conducted at the fire site of the situations of the burning (bursting) loss determined that the acetone liquid leaked and dripped from floor cracks and tunnel oven to the PP processing area. Because the PP manufacturing process rapidly generates static electricity, the flammable liquids made contact with the source of ignition, which caused the explosion and fire. Various procedures, such as those involving the operating environment of production, packaging, and processing in a high-tech plant, are likely to produce static electricity in a workplace. Improved electrostatic management can prevent the loss of property and lives, liquid acetone leakage, and loss of equipment caused by static electricity fire.     

API standard 521 guidance on mixing of hot/cold liquids and prevention of superheat limit explosions

American Petroleum Institute (API) standards and recommended practices have identified inadvertent mixing of hot and cold liquids as a potential cause for equipment overpressure since 1955. The limited guidance has been informative but provides minimal if any details on conditions that could cause an overpressure and its potential severity. Therefore, the user must interpret how and when to prevent and/or mitigate the scenario. This guidance has changed little over the years. In June 2020, API published the 7th Edition of API Standard 521 which now provides specific guidance as to conditions whereby pressure relief devices can be considered for protection and conditions where prevention remains as the only recourse. This paper discusses the basis for the revised guidance in API Standard 521 and includes supplemental guidance.     

沈阳市含铬废液集中处理试验研究

经反复多次试验，证明了用硫酸亚铁废酸液还原处理铬废液的可行性，此法以废治废，工艺简单，操作容易，处理效果好．     

有利于环境的催化方法

载体催化剂在许多有机反应中已证明可作为对环境有利的催化剂而取代传统催化剂（一般有腐蚀性，毒性或极难分解和重整并产生大量废物）。综述了近年来固体酸催化、固体碱催化剂和其它载体催化剂的特性及液相有机化学反应中的应用成果，催化机理及发展趋势。     

煤化工废水中硝基苯胺类污染物的HPLC测定

通过试验建立了工业废水中苯胺类污染物的液相色谱测定方法,优化了试验条件.该方法吸收值与基质质量浓度之间的线性关系非常显著,苯胺和6种硝基苯胺类成分的检出限在0.000 1～0.000 3 mg/L之间,空白加标试验的相对标准偏差(RSD)在1.8％～4.8％之间,基质加标回收率在58.6％～93.8％之间.对煤化工园排...     

分析钛管冷凝除湿技术在燃煤电厂烟羽治理中的应用实例

目前消除"有色烟羽"主要采用MGGH、GGH等烟气再热技术,这些技术只是通过提高烟气扩散消除"有色烟羽"的视觉感受,但不能减少污染物和水汽的排放。本文介绍了一种钛管冷凝除湿技术在某300MW循环流化床机组"烟羽治理"中的实际应用,并对冷凝除湿过程中烟气水回收、污染物协同治理等效果进行分析,最终实现节水及污染物协同减排的目的。     

固相萃取-液相色谱/质谱法测定水中硝基苯酚类化合物

建立了固相萃取-液相色谱/质谱测定水中硝基苯酚类化合物的方法。在最优条件下,7种硝基苯酚类化合物的分离度较好,目标物在0.02~3.00 mg/L范围内线性良好,相关系数均0.998,检出限为0.007~0.026μg/L,加标回收率为71.1%~95.9%,精密度为7.36%~18.6%。该方法操作简便、准确,具有较好的实用性。