自制沸石及活性Al_2O_3除湿及再生实验研究

以电厂粉煤灰为主要原料,氢氧化钠为活化剂,通过碱熔融水热法合成沸石分子筛和以溶胶凝胶法合成的活性氧化铝,比表面积分别达到148.81 m2/g和415 m2/g。将两种材料分别用于空气调节系统除湿和再生试验,并和目前常用的4A分子筛固体除湿剂比较,自制沸石分子筛和活性氧化铝都具有很好的除湿效果,而且活性氧化铝的再生温度较低,为57℃左右,再生温度在50~60℃区间内DCOP值在0.8以上,可利用太阳能等低品位能作为再生热源,是一种高效节能的固体除湿材料。     

An innovative and comprehensive approach for the consequence analysis of liquid hydrogen vessel explosions

Hydrogen is one of the most suitable solutions to replace hydrocarbons in the future. Hydrogen consumption is expected to grow in the next years. Hydrogen liquefaction is one of the processes that allows for increase of hydrogen density and it is suggested when a large amount of substance must be stored or transported. Despite being a clean fuel, its chemical and physical properties often arise concerns about the safety of the hydrogen technologies. A potentially critical scenario for the liquid hydrogen (LH₂) tanks is the catastrophic rupture causing a consequent boiling liquid expanding vapour explosion (BLEVE), with consequent overpressure, fragments projection and eventually a fireball. In this work, all the BLEVE consequence typologies are evaluated through theoretical and analytical models. These models are validated with the experimental results provided by the BMW care manufacturer safety tests conducted during the 1990's. After the validation, the most suitable methods are selected to perform a blind prediction study of the forthcoming LH₂ BLEVE experiments of the Safe Hydrogen fuel handling and Use for Efficient Implementation (SH₂IFT) project. The models drawbacks together with the uncertainties and the knowledge gap in LH₂ physical explosions are highlighted. Finally, future works on the modelling activity of the LH₂ BLEVE are suggested.     

液化石油气站装卸连接装置改造的安全隐患分析

针对目前液化石油气站内装卸软管已强制要求改装为液体装卸臂的现状,本文梳理了原质监部门和安监部门对液化石油气站内装卸连接装置的不同要求,对在用液体装卸臂改造存在的安全隐患和后续的监管问题进行了分析,并对液体装卸臂的改造和监管提出了几点建议.     

液液萃取-气质联用法测定饮用水源地水中SVOCs

采用乙酸乙酯-正己烷混合溶剂（体积比为2∶1）对饮用水源地水中阿特拉津、林丹、邻苯二甲酸二正丁酯（DBP）、邻苯二甲酸二（2-乙基己基）酯（DEHP）和滴滴涕（含4种）等8种半挥发性有机物进行1次水样萃取,用气质联用法同时测定。试验表明,方法在25．0μg/L～500μg/L范围内线性良好;检出限在0．006μg/L ～0．028μg/L 之间;空白水样3个质量浓度水平的加标回收率为87．6％～109％,平行测定6次的 RSD＜5．1％;测定集中式生活饮用水源地的实际水样,未检出目标化合物,加标回收率为98．6％～109％。     

水中有机磷农药分析前处理方法探讨

分别采用液-液萃取、固相萃取前处理方法,提取水中10种常见的有机磷农药,对比了这两种提取方法的测定结果、经济成本、花费时间及对环境的影响,建议逐步用固相萃取法取代液？液萃取法提取水中有机磷农药。     

衍生化-液液萃取-气相色谱法测定水中苦味酸的技术关键

测定水中苦味酸的国标方法——衍生化-液液萃取-气相色谱法采用的提取溶剂苯毒性较大,杂质较多,苦味酸在衍生过程中有部分损失。在国标方法的基础上,改用环己烷为提取溶剂,以溶剂液封加盖的方式,降低了衍生化产物损耗。选用中口径毛细管色谱柱,优化了色谱条件,有效地将衍生化产物与杂质分离。方法在0.500μg/L～40.0μg/L范围内线性良好,检出限为0.083μg/L,标准溶液平行测定6次的RSD≤5.3%,实际样品加标回收率为93.9%～104%。     

Detection of fullerenes (C60 and C70) in commercial cosmetics

Detection methods are necessary to quantify fullerenes in commercial applications to provide potential exposure levels for future risk assessments of fullerene technologies. The fullerene concentrations of five cosmetic products were evaluated using liquid chromatography with mass spectrometry to separate and specifically detect C₆₀ and C₇₀ from interfering cosmetic substances (e.g., castor oil). A cosmetic formulation was characterized with transmission electron microscopy, which confirmed that polyvinylpyrrolidone encapsulated C₆₀. Liquid-liquid extraction of fullerenes from control samples approached 100% while solid-phase and sonication in toluene extractions yielded recoveries of 27-42%. C₆₀ was detected in four commercial cosmetics ranging from 0.04 to 1.1 μg/g, and C₇₀ was qualitatively detected in two samples. A single-use quantity of cosmetic (0.5 g) may contain up to 0.6 μg of C₆₀, demonstrating a pathway for human exposure. Steady-state modeling of fullerene adsorption to biosolids is used to discuss potential environmental releases from wastewater treatment systems.     

The occurrence of illicit and therapeutic pharmaceuticals in wastewater effluent and surface waters in Nebraska

The occurrence and estimated concentration of twenty illicit and therapeutic pharmaceuticals and metabolites in surface waters influenced by wastewater treatment plant (WWTP) discharge and in wastewater effluents in Nebraska were determined using Polar Organic Chemical Integrative Samplers (POCIS). Samplers were installed in rivers upstream and downstream of treated WWTP discharge at four sites and in a discharge canal at a fifth location. Based on differences in estimated concentrations determined from pharmaceuticals recovered from POCIS, WWTP effluent was found to be a significant source of pharmaceutical loading to the receiving waters. Effluents from WWTPs with trickling filters or trickling filters in parallel with activated sludge resulted in the highest observed in-stream pharmaceutical concentrations. Azithromycin, caffeine, 1,7-dimethylzanthine, carbamazepine, cotinine, DEET, diphenhydramine, and sulfamethazine were detected at all locations. Methamphetamine, an illicit pharmaceutical, was detected at all but one of the sampling locations, representing only the second report of methamphetamine detected in WWTP effluent and in streams impacted by WWTP effluent.     

Nitrous oxide supersaturation at the liquid/air interface of animal waste

Concentrated animal feeding operations around the globe generate large amounts of nitrous oxide (N₂O) in the surrounding atmosphere. Liquid animal waste systems have received little attention with respect to N₂O emissions. We hypothesized that the solution chemistry of animal waste aqueous suspensions would promote conditions that lead to N₂O supersaturation at the liquid/air interface. The concentration of dissolved N₂O in poultry litter (PL) aqueous suspensions at 25 °C was 0.36 μg N₂O mL⁻¹, at least an order of magnitude greater than that measured in water in equilibrium with ambient air, suggesting N₂O supersaturation. There was a nonlinear increase in the N₂O Henry constants of PL from 2810 atm/mole fraction at 35 °C to 17 300 atm/mole fraction at 41 °C. The extremely high N₂O Henry constants were partially ascribed to N₂O complexation with aromatic moieties. Complexed N₂O structures were unstable at temperatures > 35 °C, supplying the headspace with additional free N₂O concentrations.     

Application of a variable-speed ground-coupled liquid desiccant air-conditioner to multi-story office buildings in temperate regions

A new variable-speed ground-coupled liquid desiccant air-conditioner was proposed and applied to a multi-storey office building in a temperate city of Kunming in China. Dynamic system simulations were performed to compare its performance with a constant-speed ground-source heat pump system. It was found that the use of the new system for a single-floor office reduced the annual unbalanced load to the ground heat exchanger borefield by nearly 70% together with a borehole depth reduction of up to 30%. For the case of a multi-storey office building, the number of floors served could be increased by 144% together with a reduction of CO₂ emission by 43%. The results highlighted the merit of the new hybrid system with enhanced applicability when it was applied to a multi-storey office building in a temperate city.