锂离子电池过充爆炸强度试验研究

过充是导致电池爆炸的一种常见原因,分析过充与电池爆炸的关系及过充所导致的电池爆炸对周围环境的破坏程度极其重要.以10 Ah三元材料锂离子电池为研究对象,采用不同倍率过充方式刺激锂离子电池,利用高速摄影仪、红外热像仪和压力传感器来记录该锂离子电池爆炸、燃烧的图像、温度和压力.结果表明:电池在过充的过程中,其温度变化分为3个阶段;发生爆炸后,电池的能量主要以燃烧的形式释放,燃烧的火球面积高达770.64 cm2;距电池爆炸15 cm处,最大压强为0.03 MPa,可见电池爆炸会对周围环境造成一定破坏.     

废旧Zn-C电池-活性污泥炭的制备及对SO_2的吸附

以污水厂二次污泥为主要原料,掺杂不同量的废旧Zn-C电池电极材料,采用Zn Cl2活化法制备出废旧Zn-C电池-活性污泥炭,表征分析污泥炭样品的碘吸附值、BET、FT-IR、SEM-EDS和XRD,并进行了低浓度SO2气体动态吸附试验.试验结果表明,污泥与电池粉末质量比为3∶1时,污泥炭的碘吸附值和比表面积分别达到750.6 mg·g-1和708.5 m2·g-1,优于纯污泥炭;回归分析表明,污泥炭吸附低浓度SO2的速率可用班厄姆公式描述,吸附平衡表达式可用Freundlih方程、Langmuir等温方程式表达,而Freundlih方程拟和效果更好.     

废锌锰电池真空蒸馏法去除汞的研究

废锌锰电池回收利用中的正交实验,研究蒸馏温度、系统压强和蒸馏时间对去除汞的综合影响;寻找去除汞的最优工艺条件.根据实验结果,使用真空蒸馏的方法处理锌锰电池优化的工艺参数为:蒸馏温度500～600℃,蒸馏时间60～80 min,系统压强3000～7000 Pa.     

废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录(第一批)》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池(铅酸电池、镍氢电池及锂电池)的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

失效动力锂离子电池再利用和有用金属回收技术研究

动力锂离子电池以其贮电能力大、充放电速度快等优点被广泛应用在电动汽车上,近年来失效电动汽车动力锂离子电池报废量不断增加,但未得到有效处理回收,造成了巨大的资源浪费和环境污染.失效电池还有80％左右的容量可以使用,可以在场地车或者储能电站进行再利用,以达到材料和电池的最大利用率;同时电池中含有多种有用金属（如Co,Al,Ni,Li等）且相对含量较高,极具回收价值.针对失效动力锂离子电池的再利用和有用金属的各种回收方法进行了评述.     

Micro calorimeter study on the thermal stability of lithium-ion battery electrolytes

With the extensive applications of lithium-ion batteries, many batteries explosion accidents were reported. The thermal stability of lithium-ion battery electrolyte could substantially affect the safety of lithium-ion battery. The C80 micro calorimeter was used to study the thermal stability of several commonly used organic solvents and electrolytes. The samples were heated in argon atmosphere and air atmosphere, respectively. The chemical reaction kinetics was supposed to fit by an Arrhenius law, then the self-accelerating decomposition temperature was calculated. It is found that most of the samples are stable in argon atmosphere while decomposing in air atmosphere, and the single organic solvent is more stable than the electrolyte generally.     

Survey of mercury,cadmium and lead content of household batteries

The objective of this work was to provide updated information on the development of the potential impact of heavy metal containing batteries on municipal waste and battery recycling processes following transposition of the new EU Batteries Directive 2006/66/EC. A representative sample of 146 different types of commercially available dry and button cells as well as lithium-ion accumulators for mobile phones were analysed for their mercury (Hg)-, cadmium (Cd)- and lead (Pb)-contents. The methods used for preparing the cells and analysing the heavy metals Hg, Cd, and Pb were either developed during a former study or newly developed. Several batteries contained higher mass fractions of mercury or cadmium than the EU limits. Only half of the batteries with mercury and/or lead fractions above the marking thresholds were labelled. Alkaline–manganese mono-cells and Li-ion accumulators, on average, contained the lowest heavy metal concentrations, while zinc–carbon batteries, on average, contained the highest levels.     

A future perspective on lithium-ion battery waste flows from electric vehicles

As a proactive step towards understanding future waste management challenges, this paper presents a future oriented material flow analysis (MFA) used to estimate the volume of lithium-ion battery (LIB) wastes to be potentially generated in the United States due to electric vehicle (EV) deployment in the near and long term future. Because future adoption of LIB and EV technology is uncertain, a set of scenarios was developed to bound the parameters most influential to the MFA model and to forecast “low,” “baseline,” and “high” projections of future end-of-life battery outflows from years 2015 to 2040. These models were implemented using technology forecasts, technical literature, and bench-scale data characterizing battery material composition. Considering the range from the most conservative to most extreme estimates, a cumulative outflow between 0.33 million metric tons and 4 million metric tons of lithium-ion cells could be generated between 2015 and 2040. Of this waste stream, only 42% of the expected materials (by weight) is currently recycled in the U.S., including metals such as aluminum, cobalt, copper, nickel, and steel. Another 10% of the projected EV battery waste stream (by weight) includes two high value materials that are currently not recycled at a significant rate: lithium and manganese. The remaining fraction of this waste stream will include materials with low recycling potential, for which safe disposal routes must be identified. Results also indicate that because of the potential “lifespan mismatch” between battery packs and the vehicles in which they are used, batteries with high reuse potential may also be entering the waste stream. As such, a robust end-of-life battery management system must include an increase in reuse avenues, expanded recycling capacity, and ultimate disposal routes that minimize risk to human and environmental health.     

Economies of scale for future lithium-ion battery recycling infrastructure

While lithium-ion battery (LIB) technology has improved substantially to achieve better performance in a wide variety of applications, this technological progress has led to a diverse mix of batteries in use that ultimately require waste management. Development of a robust end-of-life battery infrastructure requires a better understanding of how to maximize the economic opportunity of battery recycling while mitigating the uncertainties associated with a highly variable waste stream. This paper develops and applies an optimization model to analyze the profitability of recycling facilities given current estimates of LIB technologies, commodity market prices of materials expected to be recovered, and material composition for three common battery types (differentiated on the basis of cathode chemistry). Sensitivity analysis shows that the profitability is highly dependent on the expected mix of cathode chemistries in the waste stream and the resultant variability in material mass and value. The potential values of waste streams comprised of different cathode chemistry types show a variability ranging from $860 per ton¹ for LiMn₂O₄ cathode batteries to $8900 per ton for LiCoO₂ cathode batteries. In addition, these initial results and a policy case study can also help to promote end-of-life management and relative policymaking for spent LIBs.     

废旧锂电池中有价金属的回收技术研究

锂电池以其优异的性能得到了广泛的应用,其废弃量也在逐步增加.如果不对其进行有效的处理回收,不仅给环境保护带来巨大的压力,而且也会造成钴、锂、镍和锰等有价金属的极大浪费.综述了国内外对废旧锂电池回收技术的研究现状,比较了不同回收途径的优缺点,讨论了回收技术的发展方向,着重介绍了共沉淀法在废旧锂电池有价金属回收中的应用.此外,随着锂离子电池生产技术的发展,新的电极材料将会出现并取代过渡金属氧化物,同时也需要相应的电解液与之匹配,这将向废旧锂电池回收技术提出了新的要求.