Contributions to ecological chemistry CXII balance of conversion of buturon‐14C in wheat under outdoor conditions 1

Abstract

The urea herbicide buturon (N‐[p‐chlorophenyl] ‐N’ ‐methyl‐N’ ‐isobutinyl‐urea), ¹⁴C‐labeled, was sprayed on winter wheat as an aqueous formulation (2.98 kg/ha) under outdoor conditions. Upon harvest (three months after application), a total of 49. 2% of the applied radiocarbon was recovered: 2.0% in the plants, 46.9% in the soil, and 0.3% in the leaching water (depth > 50 cm); less than 0.1% was in the grains (0.464 ppm). Only about half of the radioactivity present in plants could be recovered under mild extraction conditions; about half of this was unchanged buturon. In straw and husk extracts, the following metabolites were identified by gaschromatography/mass spectrometry: N‐(p‐chlorophenyl)‐N‐methyl‐O‐methyl‐carbamate (metabolite I), N‐phenyl‐N’ ‐formyl‐urea (metabolite II), two unstable metabolites giving (p‐chlorophenyl)‐isocyanate upon purification (metabolites III and IV), N‐(p‐chlorophenyl)‐N’ ‐methyl‐N’ ‐isobutenylol‐urea (metabolite V), p‐chloroformanilide (metabolite VI) and biologically bound p‐chloroaniline (metabolite VII). In the root and basal stem extract, the following metabolites were identified by gas chromatography/mass spectrometry: N‐(p‐chlorophenyl)‐O‐methyl‐carbamate (metabolite VIII) and N‐(p‐chlorophenyl)‐N’ ‐methyl‐urea (metabolite IX).     

Natural Products: Seasonal Variation in Trichome Counts and Contents in Lycopersicum hirsutum f. glabratum

Abstract

Wild tomato leaves possess a pest-resistance mechanism in their glandular trichomes and the exudates they produce. Type IV and VI glandular trichomes on the leaves of five wild tomato accessions of Lycopersicum hirsutum f. glabratum (PI 126449, PI 134417, PI 134418, PI 251304, and LA 407) grown under greenhouse conditions were counted. Major chemical compounds from glandular leaf trichomes of the accessions tested were extracted, purified, and quantified at different periods during the growing seasons by gas chromatography (GC) and mass spectrometry (GC/MS). The toxicity of two methylketones (2-undecanone and 2-tridecanone), the major constituents of the accessions tested, to adults of the sweetpotato whitefly, Bemisia tabaci (Gennadius) and fourth instar larvae of the Colorado potato beetle (CPB), Leptinotarsa decemlineata (Say), was determined using no-choice bioassays. 2-undecanone caused 80% mortality of the fourth instar larvae of the CPB at the highest concentration tested (100 mg 2-undecanone mL^{? 1} of acetone) while 2-tridecanone caused 72% mortality of whiteflies at 20 mg 2-tridecanone mL^{? 1} of 65% ethanol. The concentration of 2-undecanone and 2-tridecanone on the leaves of each of the five accessions of L. hirsutum f. glabratum and the mass spectra of 2-undecanone and 2-tridecanone are presented. Overall, the concentration of 2-undecanone on the leaves was significantly higher than 2-tridecanone. Concentration of the two methylketones varied among accessions and sampling season. Plants produced the highest concentration of 2-undecanone during the month of August. On average, each plant of accession PI 251304 provided 354 g fresh leaves (averaging about 52,353 cm² exposed leaf surface area) and produced 32.5 and 8.7 mg of 2-undecanone and 2-tridecanone, respectively. L. hirsutum f. glabratum accessions may become a valuable source of natural products, which could minimize reliance on synthetic pesticides.     

The greenhouse gas balance of the Province of Siena

There is a profound debate over how to assign greenhouse gas (GHG) responsibilities; therefore, we have decided to follow IPCC guidelines, as they offer the only standardized method. We have identified each type of greenhouse emission and its level of absorption. We have studied the province and its districts and municipalities. We have determined that the energy sector is that with the highest level of emissions, even if the per capita emissions of the Province of Siena are very low. This is caused by a very low level of industrialization and the presence of a local geothermal production of energy. In order to highlight this aspect, we have considered scenarios both with and without geothermal production. Our research was then focused on single districts (groups of homogenous municipalities) and municipalities, where we found great differences among the greenhouse emissions of the areas. We have constructed a map of the greenhouse emissions of the whole province. It has been interesting to note that there are 14 municipalities with net negative emissions, seven with low positive emissions, 12 with medium positive emissions and three with elevated positive emissions. These latter correspond to the main city and to two of the most industrialized municipalities.     

A process integration approach to industrial water conservation: a case study for a Chinese steel plant

A systematic approach to optimizing water network has traditionally been utilized to exam and plan water conservation in industrial processes. In the present case study, water-pinch technology was used to analyze and optimize the water network of a steel plant near China's Zhangjiakou city. A system design was developed and a limiting constraint (Cl(-) concentration) was identified based on investigations of water quality then the minimum freshwater and wastewater targets were determined without considering water losses. The analysis was then extended by calculating the additional input of freshwater required to balance the actual water losses. A nearest-neighbor algorithm (NNA) was used to distribute the freshwater and recycled water among each of the plant's operations. The results showed that with some reconstruction of the water network, the flow rates of freshwater and wastewater could be decreased by 57.5% and 81.9%, respectively.     

Estimating Forest Ecosystem Evapotranspiration at Multiple Temporal Scales With a Dimension Analysis Approach1

Abstract:  It is critical that evapotranspiration (ET) be quantified accurately so that scientists can evaluate the effects of land management and global change on water availability, streamflow, nutrient and sediment loading, and ecosystem productivity in watersheds. The objective of this study was to derive a new semi‐empirical ET modeled using a dimension analysis method that could be used to estimate forest ET effectively at multiple temporal scales. The model developed describes ET as a function of water availability for evaporation and transpiration, potential ET demand, air humidity, and land surface characteristics. The model was tested with long‐term hydrometeorological data from five research sites with distinct forest hydrology in the United States and China. Averaged simulation error for daily ET was within 0.5 mm/day. The annual ET at each of the five study sites were within 7% of measured values. Results suggest that the model can accurately capture the temporal dynamics of ET in forest ecosystems at daily, monthly, and annual scales. The model is climate‐driven and is sensitive to topography and vegetation characteristics and thus has potential to be used to examine the compounding hydrologic responses to land cover and climate changes at multiple temporal scales.     

Risk assessment and prioritisation of contaminated sites on the catchment scale

Contaminated sites pose a significant threat to groundwater resources worldwide. Due to limited available resources a risk-based prioritisation of the remediation efforts is essential. Existing risk assessment tools are unsuitable for this purpose, because they consider each contaminated site separately and on a local scale, which makes it difficult to compare the impact from different sites. Hence a modelling tool for risk assessment of contaminated sites on the catchment scale has been developed. The CatchRisk screening tool evaluates the risk associated with each site in terms of its ability to contaminate abstracted groundwater in the catchment. The tool considers both the local scale and the catchment scale. At the local scale, a flexible, site specific leaching model that can be adjusted to the actual data availability is used to estimate the mass flux over time from identified sites. At the catchment scale, a transport model that utilises the source flux and a groundwater model covering the catchment is used to estimate the transient impact on the supply well. The CatchRisk model was tested on a groundwater catchment for a waterworks north of Copenhagen, Denmark. Even though data scarcity limited the application of the model, the sites that most likely caused the observed contamination at the waterworks were identified. The method was found to be valuable as a basis for prioritising point sources according to their impact on groundwater quality. The tool can also be used as a framework for testing hypotheses on the origin of contamination in the catchment and for identification of unknown contaminant sources.     

Modular Design of Field Lysimeters for Specific Application Needs

In Europe, the use of direct methods using lysimeters for measuring water and solute flow in soils increased in recent years. Large weighable lysimeters are best suitable for obtaining reliable data about seepage water quantity and quality. Field lysimeters – lysimeters built in directly in agriculturally used areas – of high technical standard allow a precise determination of the influence of different cropping systems on groundwater quality. They combine the advantages of true field conditions and laboratory possibilities of varying parameters, handling and maintenance. Due to the specific needs of each application the instrumentation varies. Based on general remarks on the advantages of precise weighing lysimeters four standardized lysimeter configurations are presented. Beside the specific needs of design and setup of lysimeter stations, there is need to define general requirements to enable comparable results based on standardized basic design and to reduce individual mistakes.     

直接进样-高效液相色谱-串联质谱分析水中微囊藻毒素

建立了直接进样-高效液相色谱-串联四极杆质谱分析环境水样中微囊藻毒素-LR的分析方法。方法使用C18反相柱为分离柱,柱温40℃,流速0.7 mL/min,乙腈和甲酸水溶液(0.1%)作流动相,采用梯度洗脱,保留时间4.13 min。串联质谱采用多反应监测模式,使用ESI(+)源电离水样。在上述条件下,水样过粒径为0.45μm的滤头后可直接进样,进样体积25μL时检出限可达0.04μg/L,在0.10~200μg/L范围内线性良好(R=0.999 8);样品加标回收率为96.6%~106%,相对标准偏差为1.3%~5.6%。同时方法应用到实际环境水样分析中也具有令人满意的结果。该方法灵敏度高,快速简单,适用于环境水样中MC-LR的分析。     

Application of GIS in the study of mass transport of pollutants by Adyar and Cooum Rivers in Chennai, Tamilnadu

Residential, industrial, commercial, institutional and recreational activities discharge degradable and non-degradable wastes that reach the coastal water through rivers and cause coastal pollution. In the present study, mass transport of pollutants by Adyar and Cooum Rivers to the coastal water as a result of land-based discharges was estimated during low tide. The lowest and the highest flow recorded in Adyar varied from 514.59 to 2,585.08×10⁶ litres/day. Similarly, the flow in Cooum River fluctuated between 266.45 and 709.34×10⁶ litres/day. The present study revealed that the Adyar River transported 53.89–454.11 t/d of suspended solids, 0.06–19.64 t/d of ammonia, 15.95–123.24 t/d of nitrate and 0.4–17.86 t/d of phosphate, 0.004–0.09 kg/d of cadmium, 0.15–1.29 kg/d of lead and 3.03–17.58 kg/d of zinc to the coastal water owing to its high discharge. Similarly, the Cooum River transported 11.87–120.06 t/d of suspended solids, 0.08–58.7 t/d of ammonia, 6.11–29.25 t/d of nitrate and 0.66–10.73 t/d of phosphate, 0.003–0.021 kg/d of cadmium, 0.02–0.44 kg/d of lead and 1.36–3.87 kg/d of zinc. A higher concentration of suspended solids was noticed in post monsoon and summer months. An increase in the mass transport of ammonia, nitrate, phosphate in summer months (April and May) and an increase in the mass transport of cadmium, lead and zinc were observed in monsoon months (October–December) in both the rivers. Thus mass transport of pollutants study reveal that Cooum and Adyar Rivers in Chennai contribute to coastal pollution by transporting inorganic and trace metals significantly through land drainage.     

利用MALDI-TOF MS技术简便、快速检测水华蓝藻的方法研究

以水华蓝藻为研究对象,用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)技术对其进行测定分析并获得了蛋白质指纹图谱。对铜绿微囊藻标准株(NIES-843)样品通过3种前处理方法得到的质谱图进行对比,确定了质谱分析的样品前处理方法,建立了利用MALDI-TOF MS技术简便、快速检测水华蓝藻的方法。对在水华中出现的4种不同蓝藻进行MALDI-TOF MS分析,结果表明各种蓝藻具有其特征性波谱,可据此对水华蓝藻进行区分和鉴定。该方法快速、简便、精确、可程序化,具有广泛的应用前景。