Low cost measurements of nitrogen and sulphur dry deposition velocities at a semi-alpine site: gradient measurements and a comparison with deposition model estimates

The conditional time averaged gradient method was used to measure air-surface exchange of nitrogen and sulphur compounds at a semi-alpine site in Southern Norway. Dry deposition velocities were then obtained from the bi-weekly concentration gradient measurements. Annual deposition velocities were found to be 1.4, 11.8 and 4.0 mm s(-1) for NH3, HNO3 and SO2, respectively, if all data were included, and to be 10.8, 11.8 and 13.0 mm s(-1), respectively, if only positive values were included. Measured deposition velocities were compared to two sets of values estimated from a big-leaf dry deposition module applying to two different land types (short grass and forbs, and tundra), driven by measured micrometeorological parameters. The deposition module gives reasonable values for this site throughout the year, but does not reproduce the large variability as shown in the measured data. No apparent seasonal variations were found from either measurements or module estimates due to the very low productivity of the studied area.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Uncertainty in integrated coastal zone management

Uncertainty plays a major role in Integrated Coastal Zone Management (ICZM). A large part of this uncertainty is connected to our lack of knowledge of the integrated functioning of the coastal system and to the increasing need to act in a pro-active way. Increasingly, coastal managers are forced to take decisions based on information which is surrounded by uncertainties. Different types of uncertainty can be identified and the role of uncertainty in decision making, scientific uncertainty and model uncertainty in ICZM is discussed. The issue of spatial variability, which is believed to be extremely important in ICZM and represents a primary source of complexity and uncertainty, is also briefly introduced. Some principles for complex model building are described as an approach to handle, in a balanced way, the available data, information, knowledge and experience. The practical method of sensitivity analysis is then introduced as a method for a posterior evaluation of uncertainty in simulation models. We conclude by emphasising the need for the definition of an analysis plan in order to handle model uncertainty in a balanced way during the decision making process.     

Evaluating the impact of uncertainty and variability on the value chain optimization of a forest biomass power plant using Monte Carlo Simulation

Mathematical programming models have been used to optimize the design and management of forest bioenergy supply chains. A deterministic mathematical model is beneficial for making optimum decisions; however, its applicability to real-world problems may be limited because it does not capture all the complexities, including uncertainties in the parameters, in the supply chain. In this paper, a combination of Monte Carlo Simulation and optimization model is used to evaluate the impact of uncertainty in biomass quality, availability and cost, and electricity prices on the supply chain of a forest biomass power plant. The optimization model is a deterministic mixed integer non-linear model with monthly time steps over a 1-year planning horizon. Variability in biomass quality, i.e. moisture content (MC) and higher heating value (HHV), based on the historical data of a real case study is studied in detail and fitted probability distributions are used in the model, while for electricity prices different scenarios are considered. The results show that the impact of variability in the MC on profit is higher than that of uncertainty in HHV. It is observed that the annual profit ranges between $13.3 million and $17.9 million in the presence of all possible uncertainties while its average is $15.5 million. Uncertainty in biomass availability and cost and electricity price results in the risks of having annual profit of less than $14 million and low monthly storage levels.     

环境约束下大都市城郊土地利用结构评价——基于信息熵和非期望产出模型分析

土地利用过程中会产生期望和非期望产出,针对以往土地利用结构评价中忽略环境产生的非期望产出而影响土地利用结构效率真实性问题,以大都市城郊的上海青浦区为例,宏观上,运用信息熵模型对该区2005~2014年土地利用结构有序性进行评价;微观上,运用非期望产出模型测算青浦区研究期间土地利用结构效率,为寻求区域土地利用结构效率损失的原因及改善途径提供参考。结果表明:(1)2005~2014年青浦区土地利用结构信息熵值时序上呈现"M"形变化趋势,空间上由中部向东西两翼递减;(2)2005~2014年青浦区土地利用结构效率变化趋势在时间序列上呈现"W"形变化趋势,空间上由中部的中心城区向东西两翼递减格局;(3)将环境的负产出纳入非期望产出模型进行土地利用结构效率评价,能更加准确的反映土地利用结构效率的真实性;(4)影响青浦区土地利用结构效率水平变化的主要因素为纯技术效率的变化,资源过度消耗和环境污染物排放过量是制约青浦区土地利用结构效率提升的主要原因。针对土地利用结构效率损失的原因及区域差异提出效率提升途径。研究结果可为青浦区土地利用结构优化和可持续发展提供科学借鉴。     

《燃煤二氧化硫排放污染防治技术政策》绩效定量评估

基于全国46个城市(其中38个城市位于"两控区")1996~2005年的面板数据,运用difference-in-differ-ences(DID)模型对《燃煤二氧化硫排放污染防治技术政策》的绩效进行了定量评估。结果表明,该政策的实施对于降低工业二氧化硫排放量起到积极作用,使"两控区"城市年工业二氧化硫的排放量平均降低了19.3%。     

垃圾填埋场室内模拟试验注水量确定方法及其应用

针对填埋场室内模拟试验往往忽略降雨径流和初损的问题,提出运用SCS模型确定室内模拟试验日注水量的方法,并将计算结果应用于成都长安填埋场室内模拟试验中.结果表明,采用SCS模型计算所得的日入渗量进行注水的模拟柱渗滤液产量和水质变化能够更准确的模拟填埋场实际情况.     

Roles of semivolatile and intermediate-volatility organic compounds in secondary organic aerosol formation and its implication: A review

Secondary organic aerosol(SOA) is a very important component of fine particulate matter(PM_2.5) in the atmosphere. However, the simulations of SOA, which could help to elucidate the detailed mechanism of SOA formation and quantify the roles of various precursors, remains unsatisfactory, as SOA levels are frequently underestimated. It has been found that the performance of SOA formation models can be significantly improved by incorporating the emission and evolution of semivolatile and ...     

关于室内装修有害气体烘焙排风稀释技术数值研究

依据实测数据,应用数值计算手法,对烘焙排风稀释技术不同工况下总挥发性有机化合物的排除量、烘焙排风稀释阶段室内空气中总挥发性有机化合物的浓度变化进行计算并讨论烘焙温度、换气次数对去除效果的影响。     

UniTank工艺流程氨氮浓度的动态特征

利用基于ASM2D的数学模型对上海石洞口污水厂UniTank工艺内氨氮浓度的动态特性进行了仿真研究,发现该流程反应器氨氮浓度具有非稳态特征.反应器内氨氮浓度的变化规律与曝气时间设定及进水时间设定有关.增加曝气强度,能降低边池及中池的氨氮浓度,相应增大边池及中池的硝态氮浓度.