Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes morem hallenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

流体剪切与超声空化破解剩余污泥的参数优化

为提高剩余污泥的破解效果并降低能耗,采用FS（fluid shear,流体剪切）、UC（ultrasonic cavitation,超声空化）、FS和UC联合工艺（FS-UC,UC-FS）破解剩余污泥,并应用单因素试验结合响应面法对联合工艺进行优化.结果表明:FS对剩余污泥破解效果一般,只在开始阶段具有较好效果,随作用时间延长,破解效果未有显著提高甚至下降.UC对剩余污泥破解效果明显,随作用时间延长,破解效果显著提升,但能耗也随之增大,EDR（energy disintegration ratio,效能比）明显下降.相同作用时间下,UC破解效果优于FS破解效果,UC破解剩余污泥的DD_COD（degree of disintegration,破解率）与EDR均明显高于FS方法.单因素试验得出的较优FS作用时间范围为2~8 min,较优UC作用时间范围为5~15 min.响应面法试验结果显示,联合工艺的剩余污泥破解效果和能量利用率均优于单一方法,联合工艺中FS-UC工艺的破解效果优于UC-FS工艺.FS-UC工艺的最佳参数:FS处理5.6 min再UC处理15.0 min,该条件下剩余污泥实际DD_COD为50.8%,EDR为26.8%.UC-FS工艺的最佳参数:先UC作用15.0 min再FS作用7.8 min,该条件下剩余污泥实际DD_COD为36.5%,EDR为17.1%.研究显示,以DD_COD和EDR为指标,4种工艺的高效性顺序为FS-UC > UC-FS > UC > FS,其中FS-UC工艺具有能耗低、破解效率高的特点,是4种工艺中剩余污泥破解效果最好的一种工艺.      

基于ES-VSP分布的交通状态对公交车动态排放的影响

为评估不同交通状态下公交车运行特征和排放水平的差异,现场采集广州市B9、226线路公交车的逐秒GPS数据,以ES-VSP（发动机负荷-机动车比功率）分布表征畅通、轻度拥堵和中度拥堵下的公交车运行特征,结合IVE（international vehicle emission）模型求得公交车平均排放因子并分析其差异.结果表明:①所测公交车的发动机低负荷区中bin11（-1.6 < ES ≤ 3.1,-2.9 kW/t ≤ VSP < 1.2 kW/t）频率范围为50.55%~83.39%,中度拥堵时bin 11频率是畅通时的1.1~1.3倍;② 3种交通状态下公交车的CO、VOC（运行产生的挥发性有机物）、VOC_evap（蒸发产生的挥发性有机物）、NO_x（氮氧化物）和PM（颗粒物）平均排放因子范围分别为7.63~11.40、0.26~0.46、0.68~1.56、0.32~0.51和0.72×10-2~1.28×10-2 g/km;③同种交通状态下,主干路公交车专用道和BRT车道的公交车的大部分污染物平均排放因子低于次干路混行车道、主干路混行车道,中度拥堵时主干路BRT车道的CO、VOC、VOC_evap、NO_x和PM平均排放因子相对其他道路最低,分别为7.66、0.27、0.87、0.32和0.75×10-2 g/km;④次干路混行车道、主干路混行车道的公交车污染物平均排放因子随交通状态愈加拥堵而增大,但畅通时主干路BRT车道的公交车行驶速度、加速度较高,导致CO平均排放因子较高,对应3种交通状态其比例为1.0:0.9:0.8.研究显示,交通状态对公交车运行和排放具有显著影响.      

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

基于AHP的环境经济评价在污水处理厂清洁生产中的应用研究

环保类项目主要价值体现为环境效益,清洁生产中高费方案分析中,单纯分析经济费用效益,经常为不可行方案.文章以污水处理厂3个不同的清洁生产方案(增加化学除磷、污泥深度脱水、增加除臭设施)为例,对他们的环境效益进行了货币化估值,并将AHP确定权重的方法引入环境影响货币化估值中,对纳入环境价值的方案分析其内部收益率,从而分析清洁生产中方案的可行性.分析得出化学除磷和污泥深度脱水的内部收益率分别为12.89%和13.54%,具有可行性,因此优选实施污泥深度脱水方案.     

中国低中放近地表处置场环境评价方法研究

放射性废物的处置是对其管理的最终步骤.放射性废物处置的基本安全目标是保护人类和环境免受电离辐射的有害影响.开展处置场环境影响评价可以量化它对人体健康和环境潜在影响.通过与IAEA近十几年的最新研究成果相比较,分析了中国低中放近地表处置场现行评价方法的不足,提出了改进方式,并对中国近地表处置场环境影响评价技术研究下一步应开展的工作进行了探讨.     

工业园区综合难降解废水深度处理实验研究

某工业园区综合废水处理厂设计规模5.0×104m3/d,原设计出水执行《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级B标准,需将出水标准提高到一级A排放标准.分别采用混凝沉淀法和高级氧化法深度处理二级生化出水.小试试验结果表明:二级生化出水CODcr在62~75 mg/L左右,PAC、Al2(SO4)3及PFS三种絮凝沉淀药剂处理出水CODcr去除效果均不明显,不能稳定达到一级A排放标准.芬顿催化氧化的pH=5,FeSO4+H2O2投加量为(200+100)mg/L;臭氧氧化的O3投加量33 mg/L,其出水CODcr均能达到一级A排放标准.     

兰州市废旧手机产生量预测分析研究

手机普及率日益提高,随之产生的废弃量也日益增多,分别采用时间梯度模型、市场供给A模型、斯坦福(stanford)模型对兰州市2013年-2022年废旧手机的产生量进行了预测.结果显示,不同模型预测结果之间存在较大差异,市场供给A模型和斯坦福(Stanford)模型的预测结果比较接近,均大于时间梯度模型的预测结果,三种模型预测的兰州市2022年废旧手机的产生量分别为40.40万、46.67万和21.04万部.总体上看,兰州市废旧手机的产生量增长趋势较快.     

铜冶炼企业危险废物规范化管理措施研究

危险废物会对人体健康甚至区域环境安全造成严重威胁,文章通过对某大型铜冶炼企业危险废物管理现状的调查分析,发现企业在危险废物管理中缺乏针对性,铜冶炼企业危废存在含水率多、泄漏环节多、废矿物油收集范围大等问题,笔者依据有关环境保护法律法规,结合实际工作经验,从企业自身管理、人员培训、风险控制等方面提出更加精细化的管理,逐步规范危险废物管理,减少危险废物对环境的污染.