Alterations in microbial community during the remediation of a black-odorous stream by acclimated composite microorganisms

Microbial application is an efficient, economical, and ecofriendly method for remediating black-odorous rivers. In this study, the field treatment effect and microbial community changes were monitored during remediation by the acclimated complex microorganisms of a typical black-odorous stream. After the treatment, the total phosphorus and ammonia contents decreased by 74.0% and 76.3% and the concentrations of dissolved oxygen increased from 1.65 to 4.90 mg/L, indicating the effectiveness of the acclimated composite microorganisms. The proportion of Bacteroidetes decreased significantly by 48.1% and that of Firmicutes increased by 2.23% on average, and the microbial diversity index first increased and then tended to be uniform. Redundancy analysis demonstrated that the pH, dissolved oxygen, and oxidation-reduction potential together determined the composition of the microbial communities (p < 0.05). These findings showed that the acclimated composite microorganisms can effectively remediate the black odor.     

Life-cycle phosphorus use efficiency of the farming system in Anhui Province,Central China

The rapid increase of phosphorus (P) use in farming has raised concerns regarding its conservation and environmental impact. Increasing the P use efficiency (PUE) is an approach to mitigating these adverse impacts. In this study, we applied substance flow analysis (SFA) to establish a life-cycle P use efficiency model to determine the life-cycle PUE of the farming system used in Anhui Province in 2011, which is typical of the agriculture practiced in central China. Based on this model, the P flows and PUEs of five subsystems were identified and quantified: crop farming, crop processing, livestock breeding, rural living, and urban living. The three largest P flows were found in the crop farming and livestock breeding subsystems; it can therefore be concluded that these subsystems have substantial impacts on the entire farming system. In contrast, the PUEs of crop farming, rural consumption, and livestock breeding subsystems presented the three lowest PUEs (58.79%, 71.75%, and 76.65%, respectively). These results were also consistent with the finding that the greatest P losses occurred in crop farming and livestock breeding. Consequently, the study proposes that great potential exists for increasing PUEs in the farming system of Anhui, and several of the most promising measures could be combined for improving PUEs. Finally, the study assesses data quality and presents a sensitivity analysis for use in interpreting the results. The study also shows that improving PUE and decreasing P losses in farming systems through improved nutrient management must be considered an important issue, and this study represents valuable experience in resource conservation and agricultural development in China.     

The role of perceived effectiveness of policy measures in predicting recycling behaviour in Hong Kong

Hong Kong is a compact and ‘land-hungry’ city where recycling has become an important measure for treating waste and reducing the demand on the limited landfills. The objectives of this paper are to extend the model of recycling attitude and behaviour to explain the relationship between perceived policy effectiveness and recycling behaviour. Previous studies on recycling attitude and behaviour had widely adopted the theory of planned behaviour (TPB) and the norm activation model (NAM), and drawn policy implications from them. Nevertheless, little research has been conducted to investigate the role of perceived effectiveness of policy measures in predicting recycling behaviour. To address this, a model that integrates the TPB and NAM was proposed in this study, and a street survey was conducted to investigate the case. The results illustrate that recycling intention is influenced by subjective norms, perceived behavioural control, moral norms, and awareness of consequences, as well as a newly proposed construct, namely perceived policy effectiveness. The study proved self-reported recycling behaviour (direct behaviour) and support for policy measures (indirect behaviour) are influenced by recycling intention. All in all the Government should provide more recycling bins, guidelines on recycling activities, and should accent what it has been doing to facilitate and encourage recycling.     

西藏环境信息化基础建设设计实践

描述了西藏环保厅“西藏自治区环境保护厅环境信息化能力建设项目”前期调研、设计的过程,总结在西藏信息化发展基础差、技术人才少、资金投入紧张、稳定性要求高、信息技术发展迅速等现实情况下基础信息化项目建设前期设计特点,为西藏或其他欠发达地区信息化基础建设项目设计提供参考。     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management

Further to the European Waste Electrical and Electronic Equipment (WEEE) Directive, setting up efficient collection schemes is necessary to ensure the recovery targets set. Following the subsidiary principle, the WEEE Directive defines only the general requirements for mandatory collection and recycling objectives. The modalities of the logistics and the organisation of the take-back schemes are left to the choice of Member States. In this paper, the implementation of the WEEE Directive and the development of the WEEE recovery infrastructure in Finland are described and the challenges to the effective management of the WEEE recovery system in Finland are expressed. It can be said that the implementation of the WEEE Directive has succeeded in Finland and, at the same time, the legislative basis has been enacted. In addition, a functional WEEE recovery infrastructure has been built and, the collection requirements of the WEEE Directive have been exceeded in a relatively short time. However, the paper outlines that some inefficient practices still exist, particularly in the registration and WEEE collection stages. It is concluded that raising awareness would lead to a more environmentally sound behaviour and would, ultimately, improve WEEE recovery efficiency.     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.     

Users' views of hospital environmental quality: Validation of the Perceived Hospital Environment Quality Indicators (PHEQIs)

Environmental Quality Perception (EQP) is an important construct used to help to understand the relationship between people and the hospital environment. From a patient-centered care perspective, it is important that hospital design take into account the patients' (and other users') point of view. This paper presents the adaptation and validation of a measure of hospital EQP, the Perceived Hospital Environment Quality Indicators (PHEQIs; Fornara, Bonaiuto, & Bonnes, 2006), and seeks to confirm the factor structure of this construct in a different cultural context. Three scales, two focusing on physical environments and one evaluating the social environment, were completed by 562 users of four orthopedic units in Portuguese hospitals, two older and two recently built or renovated. To assess criterion validity, hospital physical environments were also objectively evaluated by two architects. Using a confirmatory factor analysis the three validation procedures produced acceptable fit indices in the final measurement models. Overall reliability values were satisfactory, as was the evidence for criterion validity. PHEQIs scales and factors correlated with global evaluation of the environment, supporting concurrent criterion validity; and predictive criterion validity was demonstrated given that users of older and newer hospitals differed significantly on the perception of quality of hospital EQP, and that high congruence between users' and experts' evaluations was found. Discriminant construct validity was supported, and some difficulties in showing convergent validity are discussed in terms of item formulation adequacy. Implications for research and practice are described.