构建海洋石油开采溢油危机防控体系之我见

随着海洋石油勘探开发的迅速发展,海上溢油事故屡有发生。针对我国现行管理体制设计上的弊端,提出了在构建海洋石油勘探开发溢油危机防控管理体系的实践中,必须着力健全完善溢油事故宏观防控、溢油问题科技保障、溢油风险预测评估、溢油危机应急处置4个方面工作机制的对策。     

Regulating oil and gas facility stormwater discharge: An assessment of surface impoundments,spills, and permit compliance

Contaminated stormwater runoff from oil and gas (O&G) operations can pose a significant threat to surface waters. The purpose of this study is to examine the extent of this threat and identify more specific permitting requirements to protect surface waters. To better understand the extent of the threat, this paper identified and characterized the use of waste surface impoundments at O&G facilities as well as the threat level from O&G spills in California. To assess the efficacy of the current federal and California state-permitting regime, the paper evaluated stormwater permit compliance in two California counties. It also reviewed selected spill cases and associated Spill Prevention, Control and Countermeasure Plans and Stormwater Pollution Prevention Plans to identify the adequacy of current industry practices.The analysis showed that contaminated stormwater from O&G facilities can be better regulated. The U.S. Environmental Protection Agency does not require O&G facilities to file for an Industrial Stormwater General Permit even though many O&G industry practices have the potential to contaminate stormwater runoff from the site. When O&G facilities discharge a Reportable Quantity of a hazardous chemical or violate a water quality standard, they are required to enroll in the National Pollutant Discharge Elimination System permit program. Spills, although not a direct indication of stormwater runoff, can highlight polluted runoff discharges that should have been regulated. Medium and large spills that reached waterways were such a risk for which operators did not file for a permit. In California new filing requirements for the oil and gas industry require all facilities that discharge stormwater that has come into contact with any overburden, raw material, or intermediate products located on the site, to file for an Industrial Stormwater General Permit. As this study showed, there has been an increase in enrollment since the enactment of the new requirements. Having all facilities enroll in the general permit program, as done in California, would require minimum monitoring and maintenance that could help prevent spills. A further step to ensure better protocol is to require specific pollution control practices in addition to the current general permit requirements. Such permitting regimes not only can be implemented on the US federal level but also internationally.     

Pyrolysis of waste tyres: A review

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. The key influence on the product yield, and gas and oil composition, is the type of reactor used which in turn determines the temperature and heating rate. Tyre pyrolysis oil is chemically very complex containing aliphatic, aromatic, hetero-atom and polar fractions. The fuel characteristics of the tyre oil shows that it is similar to a gas oil or light fuel oil and has been successfully combusted in test furnaces and engines. The main gases produced from the pyrolysis of waste tyres are H₂, C₁–C₄ hydrocarbons, CO₂, CO and H₂S. Upgrading tyre pyrolysis products to high value products has concentrated on char upgrading to higher quality carbon black and to activated carbon. The use of catalysts to upgrade the oil to a aromatic-rich chemical feedstock or the production of hydrogen from waste tyres has also been reported. Examples of commercial and semi-commercial scale tyre pyrolysis systems show that small scale batch reactors and continuous rotary kiln reactors have been developed to commercial scale.     

Analysis of gas dispersion and ventilation within a comprehensive CAD model of an offshore platform via computational fluid dynamics

Maintaining an adequate air flow with a desired air quality that is free from hazardous gases is among the most important actions taken toward the improvement of safety in any process plant. Due to the increased focus on the consequences of existing hazardous material on safety, health, and the environment, air quality and sufficient ventilation within a plant has been increasingly considered in the design stage. This paper investigates and analyzes methane and hydrogen sulfite dispersion and the effect of air ventilation within a CAD model of an offshore platform using computation fluids dynamics (CFD). In addition, this method and its principals could be utilized in any other hazardous environment. Simulations of possible hazardous events along with solutions for preventing or reducing their probability are presented to better assess the data. These investigations are performed by considering hypothetical hazardous scenarios which consist of gas leakages from pipes and process equipment under different conditions. After drafting a precise and highly detailed CAD model of the plant and performing CFD simulations on this model, the results of gas behaviors, dispersion, distribution, accumulation, and its possible hazards are investigated and analyzed. The larger amount of details of the actual plant model in CFD simulation are obtained by using a combination of different methods and software. These include PDMS for 3-D drawing of the plan, Rinoceros for geometrical integration of the process equipment and facilities, and Sharc Harpoon which meshes the model. Moreover, the probability of inducing ignitable or toxic concentration of gases within the atmosphere and air ventilation of the unit is considered by these investigations.     

Experimental investigation on oxidation of sulfurized rust in oil tank

Oxidation of sulfurized rust in oil tank is complicated, and it is influenced by numerous factors such as water content, air humidity, operating temperature etc. The paper focuses on the oxidation process of sulfurized rust in the wild. Firstly, samples collected from a petrochemical company were put into the sulfurization & oxidation experimental apparatus to gain wet and dry sulfurized rusts. Their chemical compositions and phase were analyzed by Energy Dispersive X-ray Spectrometer (EDS) -scanning electron microscope (SEM) technique. The results showed that both wet and dry sulfurized rusts had S, Fe₂O₃, Fe₃S₄ and FeS₂, whereas FeS only existed in wet sulfurized rust. The two kinds of rusts gave a short length of side, diamond appearance and a large pore size in structure. Then oxidation of wet sulfurized rust was investigated, which included electrochemical reaction stage, electrochemical & chemical reaction coexisting stage and chemical reaction stage. The final oxidation product of wet sulfurized was determined to be Fe₂O₃. On the basis of this study, an indicator for monitoring and early-warning was proposed to prevent plants in vicinity of the accidental vessel or tank from fire and explosion.     

Toxicity evaluation of 10 oil gelling agents北大核心CSCD

Oil gelling agents are widely used in emergency response of marine oil spills. However, the biological toxicity of oil gelling agents is not well understood. This research aimed to evaluate the environmental safety of oil gelling agents used for rapid removal and cleanup of marine oil spills. We used luminescent bacteria (Acinetobacter sp. Tox2 and Acinetobacter sp. RecA) combined with exposure experiment using marine medaka (Oryzias melastigma) juveniles to detect the acute toxicity and genotoxicity of 10 oil gelling agents. As a result, a certain level of acute toxicity was detected from the oil gelling agent FOA and GMN-01 (the toxicity equivalent to 0.067 mg/L and 0.084 mg/L of HgCl2, respectively), and a certain level of genotoxicity was detected from the oil gelling agent NORSOREX (the toxicity equivalent to 0.307 mg/L of MMC) by the luminescent bacteria test. However, no obvious acute toxicity or genotoxicity was detected from the above three oil gelling agents in fish-exposure experiments. Our results suggest that the 10 oil gelling agents have no obvious acute toxicity or genotoxicity to higher organisms (including marine medaka). The luminescent bacteria test is more sensitive in detecting biological toxicity of oil gelling agents. This study provides a reference for environmental safety evaluation of the oil gelling agents used in the cleaning up of the marine oil spills.     

Characterization and catabolic genes detection of three oil-degrading Rhodococcus spp.北大核心CSCD

Oil pollution is one of the major factors causing environmental deterioration. Bioremediation of oil contaminated environments by microorganisms attracts much research attention. This study aimed to screen efficient oil-degrading bacteria from oil contaminated soil and analyze their characteristics and catabolic genes. Oil-degrading bacteria were screened from oil contaminated soil in minimal medium containing crude oil and identified by morphological, physiological and biochemical characteristics and 16S rDNA sequence analysis. Their growth and degradation characteristics were studied with ultraviolet spectroscopy and GC-MS analysis. The surfactant production was studied by adopting culture method. The major oil-degrading related genes were detected by t he PCR a mplification. As a result, t hree oil-degrading bacteria strains named KB1, 2182 and JC3-47 were isolated from the oil contaminated soil samples. The strains could use crude oil as the sole carbon source to degrade oil with a degrading rate of 41.02%, 32.26% and 55.90%, respectively, when cultured in minimal medium containing crude oil for 3 days. The bacteria were identified to belong to genus Rhodococcus. With 100% similarity of 16S rDNA sequences of the three strains with known ones of Rhodococcus, KB1 was preliminarily identified as Rhodococcus erythropolis, 2182 as Rhodococcus equi, and JC3-47 as Rhodococcus qingshengii. They grew well at 10-50 °C, with the initial pH of 3-9 and the NaCl concentration of 0-5%. The optimal temperature for bacterial growth was 35 °C, 35 °C and 30 °C respectively. KB1 and 2182 could grow at pH 2 and 9.0% of NaCl. The bacteria grew well in broth containing different organic substrates as sole carbon source, such as n-dodecane, n-octadecane, benzene, methylbenzene, xylene and naphthaline. KB1 and JC3-47 could grow well in broth containing pyrene. GC-MS analysis revealed that the bacteria could effectively degrade medium- and long-chain alkane components in crude oil. The bacteria produced biosurfactants and decreased the surface tension of the culture broth. They also showed adhesion activities to n-hexadecane. The oil-degrading related genes such as alkane monooxygenase, aromatic-ring-hydroxylating dioxygenase and catechol dioxygenase genes were detected in all the three strains. Besides, biphenyl dioxygenase genes were detected in KB1 and 2182. The isolated Rhodococcus spp. strains could effectively degrade petroleum hydrocarbons with high adaptabilities to extreme environments such as high salt and low temperature. They are supposed to be applied broadly in the bioremediation of oil contaminated soil in such environments.     

浅谈油气生产中的现场安全管理

油气生产中的各种不安全因素大多来源于现场作业。生产现场是安全管理的控制点。运用安全管理和安全系统工程的一些理论方法，可以提高生产中人的安全意识，减少现场作业中的事故隐患，达到预防事故的目的     

FeS引发储油罐着火温度动态变化曲线的研究

储油罐着火事故被推测是由硫腐蚀产生的FeS氧化引起的。笔者阐述了储罐中FeS形成的原因 ,并采用自然发火绝热测试系统对FeS自然氧化进行 1 9h的跟踪实验 ,观察FeS绝热氧化过程中温度动态变化特性。实验发现 ,FeS氧化由诱导氧化期、中速氧化期和加速氧化期 3个阶段组成。诱导氧化期是积蓄能量 ,激发FeS活性的过程 ,试样温度基本未发生变化 ;中速氧化期是FeS试样表面的分子活性被激发 ,与FeS试样表面吸附的氧气发生氧化反应的过程 ,温度增加较慢 ;加速氧化期是FeS分子内部的活性被激活并进行氧化反应的过程 ,温度迅速升高。结果证明 :随着反应的进行 ,温度随反应时间变化的幅度越来越大 ,氧化反应的反应热不能及时散开而急剧地积累 ,温度急剧地升高 ,将引起油品自燃。此外 ,通过X衍射图和氧化升温曲线证明 ,水是影响FeS氧化的重要因素。     

The National Vegetation Classification Standard applied to the remote sensing classification of two semiarid environments

The National Vegetation Classification Standard (NVCS) was implemented at two US National Park Service (NPS) sites in Texas, the Padre Island National Seashore (PINS) and the Lake Meredith National Recreation Area (LMNRA), to provide information for NPS oil and gas management plans. Because NVCS landcover classifications did not exist for these two areas prior to this study, we created landcover classes, through intensive ground and aerial reconnaissance, that characterized the general landscape features and at the same time complied with NVCS guidelines. The created landcover classes were useful for the resource management and were conducive to classification with optical remote sensing systems, such as the Landsat Thematic Mapper (TM). In the LMNRA, topographic elevation data were added to the TM data to reduce confusion between cliff, high plains, and forest classes. Classification accuracies (kappa statistics) of 89.9% (0.89) and 88.2% (0.87) in PINS and LMNRA, respectively, verified that the two NPS landholdings were adequately mapped with TM data. Improved sensor systems with higher spectral and spatial resolutions will ultimately refine the broad classes defined in this classification; however, the landcover classifications created in this study have already provided valuable information for the management of both NPS lands. Habitat information provided by the classifications has aided in the placement of inventory and monitoring plots, has assisted oil and gas operators by providing information on sensitive habitats, and has allowed park managers to better use resources when fighting wildland fires and in protecting visitors and the infrastructure of NPS lands.