Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Here, we focused on the recycling of waste printed circuit boards (WPCBs) using vacuum pyrolysis-centrifugation coupling technology (VPCT) aiming to obtain valuable feedstock and resolve environmental pollution. The two types of WPCBs were pyrolysed at 600°C for 30 min under vacuum condition. During the pyrolysis process, the solder of WPCBs was separated and recovered when the temperature range was 400-600°C, and the rotating drum was rotated at 1000 rpm for 10 min. The type-A of WPCBs pyrolysed to form an average of 67.91 wt.% residue, 27.84 wt.% oil, and 4.25 wt.% gas; and pyrolysis of the type-B of WPCBs led to an average mass balance of 72.22 wt.% residue, 21.57 wt.% oil, and 6.21 wt.% gas. The GC-MS and FT-IR analyses showed that the two pyrolysis oils consisted mainly of phenols and substituted phenols. The pyrolysis oil can be used for fuel or chemical feedstock for further processing. The recovered solder can be recycled directly and it can also be a good resource of lead and tin for refining. The pyrolysis residues contained various metals, glass fibers and other inorganic materials, which could be recovered after further treatment. The pyrolysis gases consisted mainly of CO, CO(2), CH(4), and H(2), which could be collected and recycled.     

A national inventory to estimate release of polychlorinated dibenzo-p-dioxins and dibenzofurans in Portugal

Taking into account current environmental concerns, the main objective of this work focused a national inventory aiming to estimate the amount of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) released in Portugal in 2006. The methodology used was based on the Standardized Toolkit for Identification and Quantification of Dioxins and Furan Releases, developed by UNEP Chemicals, in 2005. The method allows the assessment of the amount of PCDD/PCDF released into the environment along five vectors involving air, water, land, products and residues. Facing some difficulties mainly regarding to the availability of data for some activities known to produce PCDD/PCDF, three scenarios (Sc1 to Sc3) corresponding to lower, central and upper estimates were established. The Sc1 scenario (lower estimate) includes the situations where in case of doubt or scarce information, reduced or none emission values were assumed, Sc2 refers to a central estimate, which is believed to be the most realistic for the Portuguese situation, while Sc3 corresponds to the worst case (upper estimate). The results obtained pointed out that the total amount of PCDD/PCDF emitted in Portugal during the period under analysis was in the range of 51.2-217.9 g TEQ year⁻¹, with the most likely value of 95.2 g TEQ year⁻¹ achieved under the Sc2 scenario. This study also showed that the methodology developed by UNEP Chemicals is a very simple one, and the main difficulty is the availability of data. The main indicators calculated in this study were 8.98 μg TEQ/(year person) by taking into account the total amount of PCDD/PCDF released, and 3.63 μg TEQ/(year person) when only air emissions were considered.     

Effects of organic contaminants in reactive oxygen species, protein carbonylation and DNA damage on digestive gland and haemolymph of land snails

The present study focused on early responses of land snails Eobania vermiculata to organic environmental contaminants, by investigating the use of a newly-established method for the measurement of protein carbonylation as a new biomarker of terrestrial pollution, as well as by measuring the ROS production and the DNA damage. Land snails were exposed to different concentrations of chlorpyrifos, parathion-methyl or PAHs in vivo or in vitro in the laboratory. The susceptibility of exposed snails was increased in relation to oxidative stress induced by contaminants tested. A statistically significant increase in ROS production, protein carbonylation and DNA damage was revealed in the snails treated with pollutants, compared to the untreated ones. The results indicated the effectiveness of measuring ROS production and DNA damage and reinforce the application of the present ELISA method in organic terrestrial pollution biomonitoring studies.     

Inside-sediment partitioning of PAH, PCB and organochlorine compounds and inferences on sampling and normalization methods

Comparability of sediment analyses for semivolatile organic substances is still low. Neither screening of the sediments nor organic-carbon based normalization is sufficient to obtain comparable results. We are showing the interdependency of grain-size effects with inside-sediment organic-matter distribution for PAH, PCB and organochlorine compounds. Surface sediment samples collected by Van-Veen grab were sieved and analyzed for 16 PAH, 6 PCB and 18 organochlorine pesticides (OCP) as well as organic-matter content. Since bulk concentrations are influenced by grain-size effects themselves, we used a novel normalization method based on the sum of concentrations in the separate grain-size fractions of the sediments. By calculating relative normalized concentrations, it was possible to clearly show underlying mechanisms throughout a heterogeneous set of samples. Furthermore, we were able to show that, for comparability, screening at <125 μm is best suited and can be further improved by additional organic-carbon normalization.     

Modeling the carbon dynamics of the La Grande hydroelectric complex in northern Quebec

A mechanistic semi-empirical carbon cycle model of the La Grande reservoir complex in northern Quebec, Canada was conceived in order to investigate the climate impact of such a large alteration of the continental water cycle. The model includes inputs from the drainage basin, organic matter release from flooded soils, CO₂ emissions across the water-atmosphere interface and sedimentation. Most input data stems from previous research by our group on those ecosystems. The model includes the seven reservoirs of the La Grande complex and was run for periods of 50 and 100 years. Terrigeneous dissolved, particulate and suspended soil carbon fluxes and concentrations were computed. Over 100 years, 31.3 × 10¹² g C are released from flooded soils, equivalent to 28-29% of inputs from the drainage basin. 40-74% of dissolved organic carbon is mineralized. CO₂ fluxes over 100 years are 50.5-79.8 × 10¹² g C, 46.4-67.9 × 10¹² g C more than in the absence of reservoirs. The increase in mineralization of organic matter and in CO₂ emissions is a result of the increase in cumulated water residence time due to the creation of the reservoirs. Changes in other carbon sinks and sources likely offset a part of this additional carbon flux to the atmosphere. In the first years following flooding of the reservoir, organic carbon release from flooded soils exceeds CO₂ emissions, implying the downstream export of large quantities of eroded soil organic carbon. After this initial period, CO₂ emissions are fuelled by organic carbon originating from the drainage basin.     

Particulate organic matter in the Northern and Central Adriatic

The particulate organic matter distribution and its elemental composition in the northern and central Adriatic Sea during different seasonal periods are shown, highlighting the principal processes and factors influencing their distribution and characteristics. In the low salinity waters the concentrations of particulate carbon, nitrogen and phosphorus were higher and more variable than in the dense waters, mainly due to dilution effects which induce an abundant phytoplankton growth. Generally in summer the particulate organic matter distribution followed the trophic gradient while in winter resuspension events often became more important. Differences between summer and winter were more evident in the diluted waters and were mainly due to the seasonal heat exchanges and to the fresh water inputs. Marked differences in C/P ratios were observed in the POM: high ratios in the northern diluted waters and low in the more saline waters and in the central Adriatic.     

Inorganic and methyl-mercury speciation in sediments of the Swarzędzkie Lake

Sediment samples were analysed for mercury and methylmercury content in different parts of the bottom sediment of Swarz ?dzkie Lake, which were influenced by different external pollution sources. The results of determination with two methods of mineralization using two separate media (HNO₃/H₂O₂ and HF) were compared. The accuracy of the studied methods was analysed using certified reference material IAEA 405 of river sediment. The recovery of mercury was satisfactory and ranged from 97.5 to 98.8%. Methylmercury compounds in the studied sediments were found in limited concentrations. Their concentrations ranged from 0.26 to 58.1 μg kg^?1, i.e. 1.0–7.4% of the total mercury content. The depth profile displayed high values of both total and methylmercury content at a depth of 10–20 cm, related to the heavy pollution of the lake in the 1980s. Canonical analysis displayed the relationship of both total mercury and methylmercury concentrations with organic matter and phosphorus content in bottom sediments.     

Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200 atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η = 6.4, whereas the thermal basic pretreatment gave the highest value, η = 17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η = 9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η = 5.2.     

Impact of right-of-way construction on vegetation in the Red Lake Peatland,northern Minnesota

During the winters of 1978–79 and 1979–80, a 500-kV electrical transmission right-of-way (r-o-w) was constructed across the Red Lake Peatland in northwestern Minnesota, the largest contiguous peatland in the lower 48 states of the USA. Immediately before, and for two years following construction, vascular vegetation was monitored within the r-o-w and in undisturbed control areas. Monitoring was carried out in five vegetation types: a thicket swamp, a low shrub bog, a graminoid fen, a treed bog, and a treed fen. Evaluation of construction impacts was based on vegetation structure, irrespective of species composition, and on community composition (species data for low shrubs and herbs). Construction eliminated trees from the r-o-w. Vegetation structure, excluding trees, was markedly altered in the two bog types and the treed fen type in the first postconstruction growing season. By the second season, measurable recovery to control levels had begun. The sample plots were placed into a previously developed vegetation classification system for the Red Lake Peatland, on the basis of herbs and low shrubs. There was a shift in composition in the low shrub bog and in the treed vegetation types following construction. Results of both methods of data analysis were consistent. Major vegetation changes following construction occurred in the low shrub bog and treed types. The open, low-stature fen types showed almost no changes related to construction. Even in the affected types, all vegetation strata except trees were returning to their preconstruction status by the second growing season following construction.     

Influence of organic loading on an anaerobic sequencing biofilm batch reactor (ASBBR) as a function of cycle period and wastewater concentration

The effect of organic loading on the performance of a mechanically stirred anaerobic sequencing biofilm batch reactor (ASBBR) has been investigated, by varying influent concentration and cycle period. For microbial immobilization 1-cm polyurethane foam cubes were used. An agitation rate of 500 rpm and temperature of 30+/-2 degrees C were employed. Organic loading rates (OLR) of 1.5-6.0gCODl(-1)d(-1) were applied to the 6.3-l reactor treating 2.0 l synthetic wastewater in 8 and 12-h batches and at concentrations of 500-2000mgCODl(-1), making it possible to analyze the effect of these two operation variables for the same organic loading range. Microbial immobilization on inert support maintained approximately 60 gTVS in the reactor. Filtered sample organic COD removal efficiencies ranged from 73 to 88% for organic loading up to 5.4gCODl(-1)d(-1). For higher organic loading (influent concentration of 2000mgCODl(-1) and 8-h cycle) the system presented total volatile acids accumulation, which reduced organics removal efficiency down to 55%. In this way, ASBBR with immobilized biomass was shown to be efficient for organic removal at organic loading rates of up to 5.4gCODl(-1)d(-1) and to be more stable to organic loading variations for 12-h cycles. This reactor might be an alternative to intermittent systems as it possesses greater operational flexibility. It might also be an alternative to batch systems suspended with microorganisms since it eliminates both the uncertainties regarding granulation and the time necessary for biomass sedimentation, hence reducing the total cycle period.