瓦斯压力对卸荷原煤力学特性及能量特征的影响

运用自主研制的含瓦斯煤热流固耦合三轴伺服渗流试验装置,以原煤煤样作为研究对象,进行了含瓦斯煤固定轴向压力、卸围压的渗流试验,研究了卸围压过程中瓦斯压力对煤样力学特性和能量特征的影响。结果表明:在轴压加载阶段,煤样的变形模量基本不变,泊松比逐渐减小;在定轴压卸围压阶段,煤样的变形模量先小幅度增加,然后逐渐减小,泊松比则逐渐增大。瓦斯压力越高,煤样的承载能力越低,煤样发生破坏时相应的轴向应变和围压卸荷量百分比越小,而煤样破坏时的径向变形和扩容量越大。各应变围压柔量Δεi与瓦斯压力呈线性关系且线性相关性良好。随瓦斯压力升高,轴向应变的围压敏感性降低,径向应变和体积应变的围压敏感性显著升高。随瓦斯压力升高,煤样发生破坏时存储的弹性应变能Ue减小,而总能量U、耗散能Ud和耗散能比例Ud/U都增大。     

以氢气为主要成分的其他可燃气体对低浓度甲烷爆炸特性的影响

为研究矿井火区中一氧化碳(CO)、氢气(H_2)、乙烯(C_2H_4)和乙烷(C_2H_6)等其他可燃气体对甲烷(CH_4)爆炸特性的影响,利用可视球形气体爆炸系统开展了多元可燃气体爆炸压力特性试验,观察并分析了峰值爆炸压力、最大爆炸压力上升速率及其相应时间。通过高速摄影系统拍摄了视窗范围内爆炸火焰传播图像,基于边缘检测方法确定了火焰前锋位置,继而得到最大火焰传播速度。分析了以氢气为主要成分的其他可燃气体对低浓度CH_4-空气混合物压力特性和火焰传播行为的影响。结果表明,多元可燃气体的存在增加了低浓度CH_4-空气混合物的爆炸危险性。随混合气体体积分数增加,低浓度CH_4-空气混合物的峰值爆炸压力、最大爆炸压力上升速率和最大火焰传播速度非线性增加;此外,到达峰值爆炸压力、最大爆炸压力上升速率的时间显著缩短。     

表面活性剂在甲烷氧化菌降解煤体甲烷中的适用性研究

甲烷氧化菌液在进入煤储层后会产生较高的毛管压力,且随着甲烷氧化菌降解煤层瓦斯的进行,毛管压力逐渐增大,容易引起水锁伤害。采取向甲烷氧化菌菌液加入复配表面活性剂以期减缓菌液造成的水锁伤害,通过测试所选表面活性剂十二烷基苯磺酸钠（SDBS）与椰子油脂肪酸二乙醇酰胺（CDEA）对菌液表面张力的降低程度来了解表面活性剂与菌液的配伍比例,并对含复配表面活性剂的甲烷氧化菌对煤层甲烷的降解进行研究。研究结果表明:表面活性剂与菌液最佳配伍比例为SDBS∶CDEA为1∶4,最佳配伍浓度为0.5％,且表面活性剂在菌液中稳定性较好;菌液中添加复配表活剂20 mL,在混合气体压力为2 MPa、氧浓度为 1％、温度为 30 ℃时,添加复配表面活剂菌液的甲烷最终降解率为51.65％,比未添加复配表面活剂菌液高出11％左右。因此,向甲烷氧化菌菌液中添加复配表面活性剂具有很好的适用性。     

Theoretical pressure prediction of confined hydrogen explosion considering flame instabilities

In order to ensure the safe utilization of hydrogen energy, the explosion pressure behavior is extremely important to design chemical equipment and evaluate explosion accident consequence. This paper is aimed at establishing a theoretical method of predicting explosion pressure behavior in the confined chamber by considering flame instabilities. The tendency of flame wrinkling factor in the pressure-buildup stage is firstly evaluated using large eddy simulation and the compensation theory. The limiting value of flame wrinkling factor during entire explosion process is calculated using the fractal theory. Finally, the dynamic model of flame wrinkling factor is implemented into the smooth flame model. The results demonstrated that the flame wrinkling factor in the pressure-buildup stage almost increases linearly with time. The limiting value of flame wrinkling factor is 2.4649. The explosion pressure will be underestimated using the smooth flame model, and the calculated explosion pressure in the isothermal condition is smaller than that in the adiabatic condition. When the fully turbulent flame is considered, the explosion pressure will be overpredicted significantly. By changing the confined chamber size, the explosion pressure could be reproduced relatively satisfactorily when the flame wrinkling factor is assumed to increase exponentially. The explosion pressure prediction must consider the effect of adiabatic compression and flame instabilities on burning rate.     

低压离子色谱法测定水和酸雨样品中的Li~+,Na~+,NH_4~+,K~+,Ca~(2+)和Mg~(2+)离子

本文介绍了低压离子色谱仪测定水样(井水、湖水、矿泉水、自来水)和酸雨中锂、钠、铵、钙、钾和镁离子的方法、欲测阳离子在阳离子交换柱上被分离,分别用1.4mmol·1~(-1)HNO_3和0.6mmol·1~(-1)乙二胺+1.2mmol·1~(-1)HNO_3溶液作流动相,流速为1.6ml·min~(-1).各离子的流分用电导检测.进样量为10μl时,Li~+,Na~+,NH_4~+,K~+,Ca~(2+)和Mg~(2+)离子的检出限(2倍噪音比),分别为0.020,0.050,0.100,0.250,2.5和1.0μg·ml~(-1).     

氯气压力自动检测调节新技术在氯气系统的应用

氯碱生产中,氯气系统压力不易控制,容易发生泄漏爆炸事故。为解决这一难题,保证安全生产,金川公司化工厂于１９９６年设计并安装了一套氯气压力自动检测调节系统,经过两年的实际使用,达到了稳定氯气系统压力的良好效果。     

探讨面向21世纪环境保护发展的压力

按目前形势发展预测,近些年内我国环境状况难以得到根本改善,由于能源和水资源紧缺,下世纪初环境保护将承受巨大压力。根据数据分析,改善消费结构、推行清洁生产、推动经济国际化进程有利于降低对环境的压力     

基于负压法炮弹气密性检测方法研究

目的 实现炮弹气密性检测及其自动化、智能化设备的开发.方法 提出了一种基于负压法的炮弹气密性检测方法.首先,阐述了负压法气密性检测工作原理和实施流程,并对炮弹检测设备的用例模型和检测设备功能框架进行了讨论.其次,针对工程实际,详细给出了测量腔安装密封性计算、测量腔泄漏的压差泄漏率计算、测量腔的初始测量压力值计算、炮弹气体泄漏量计算等检测算法和判定方法.结果 基于负压法的炮弹气密性检测方法的灵敏度比正压法高.结论 本方法可为实现对全弹的气密性检验提供参考,同时也可促进和指导炮弹气密性检验设备的研制,将有效保障炮弹气密性检验自动化设备开发效率和有效性.     

吸附分离技术在大气污染防治中的应用研究

简述了硝酸尾气、黄磷尾气等污染物中NOχ、SO2、P、As、PH3、CO对生态环境产生的危害，及采用吸附分离技术在治理气体污染物中的应用。     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.