一种能判断变频器状态的曳引设备节能系统

能量回馈式系统是变频曳引电梯广泛使用的一种节能系统,如何通过正确判断变频器状态来判断电梯处于电动状态还是发电状态,对能量回馈式节能系统的自动运行工作十分重要。因此设计一种能判断变频器实时工作状态的节能系统,利用在曳引设备变频器输出端任一回路中接入电流传感器,检测其是否有电流以判定变频器的运行状态。测试结果表明：该系统每月的用电量比原系统减少了38％以上,实现了变频曳引设备系统准确判断变频器运行状态并自动完成势能回收及反馈供电的节能控制。     

The use of construction equipment productivity rate model for estimating fuel use and carbon dioxide (CO2) emissionsCase study: bulldozer,excavator and dump truck

Carbon dioxide (CO₂) emission has drawn a great attention in recent years all over the world, and it plays a very important role in the process of global warming. The off-road equipment, which includes construction equipment, accounted for 7.5% emission of CO₂. The objective of this article is to propose a groundwork for a methodology that can be used to estimate the total fuel use and CO₂ emissions from construction equipment activities based on its productivity rate. Currently, there is not a methodology or technique for estimating productivity, fuel use and emissions at once. The multiple linear regression analysis has successfully modelled the productivity rate and good to be used as a benchmark for estimating fuel use and CO₂ emissions from various types of construction equipment performing earthwork activities. The proposed methodology will help the contractor to estimate the total expected pollutant emissions for the project, which would be valuable information for a preliminary environmental assessment of the project. By using construction plans and specifications, the methodology and tool presented in this research can be used to estimate cost, fuel use and emissions from commercial, residential, industrial or heavy highway. By the proposed approach, it is possible to develop new fuel use and emissions inventories for construction industry in general.     

Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects

The construction process contributes to pollutant emissions, particularly through the operation of diesel- and gasoline-powered equipment. In the past decade, a series of investigations were undertaken to quantify these emissions for a variety of non-road construction equipment performing different activities and undergoing different duty cycles, and a model to estimate quantities of six types of pollutant was developed. This paper uses that model to estimate emissions for four street and utility construction projects which no one has done previously. We combined information from company records with standard construction industry manuals to estimate total emissions for the projects and to examine the pollution patterns and magnitudes. The street construction projects all had similar emission profiles with a large peak at the beginning and a steady output of emissions throughout the duration of the project. For example, in two of the projects studied, half of all CO₂ emissions were produced before the projects were 40% completed. Results showed that demolition and earthwork are the activities with the largest contribution. The equipment types with the largest contribution are backhoes, front-end loaders, bulldozers and trenchers. Trenchers, for example, produced 30% of all emissions on the projects on which they were used.     

Engelbart SST工艺农村生活污水一体化治理设备的应用效果及运行能耗

针对农村生活污水水质水量波动性大的特点,应用基于Engelbart SST工艺的一体化处理设备对农村生活污水进行了处理,并考察了该设备在水质波动情况下的处理效果与运行能耗。结果表明,在DO为0.3~0.5 mg·L⁻¹、回流比为1 000%~2 000%、HRT为12~15 h、MLSS为5 600~8 800 mg·L⁻¹的工艺条件下,配合化学除磷,设备COD、NH₃-N、TN、TP平均去除率分别可达到95.3%、94.9%、78.9%、92.2%。该设备表现出了良好的抗波动能力,在COD、NH₃-N、TN处理负荷较设计值波动幅度分别为−39.7%~171.0%、−34.8%~96.9%、−45.0%~61.1%的条件下,出水COD≤50 mg·L⁻¹、NH₃-N浓度≤5.0 mg·L⁻¹、TN浓度≤15 mg·L⁻¹。该设备利用曝气自动控制系统在经济DO条件下运行,吨水能耗为0.24~0.33 kWh。本研究结果可为农村污水处理的技术选择和运行提供参考。     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.     

基于GM-SVR的小样本条件下化工设备可靠性预测

为了准确预测化工设备可靠性趋势，针对化工设备失效寿命数据为小样本的情形，基于灰色估计法与支持向量回归机在小样本数据处理中的优势，建立了失效寿命时间服从三参数威布尔分布的化工设备可靠性模型；结合GM（1，1）和SVR对模型进行参数估计，在压缩机可靠性分析中进行了实例应用，对比分析了最小二乘法、灰色估计法和GM-SVR的估计效果。研究结果表明:GM-SVR对威布尔分布参数的估计精度明显优于最小二乘法和灰色估计法，可以有效地应用于化工设备失效数据为小样本时的可靠性预测。     

矿井瓦斯控爆技术及材料研究进展

瓦斯爆炸灾害防治一直是我国煤矿安全研究的热点、难点。通过对国内外相关文献总结分析,从瓦斯抑爆装置、抑爆介质及抑爆机理3个方面综述了目前国内外矿井瓦斯抑爆技术及抑爆材料的研究现状,提出了未来的发展方向。研究结果表明:瓦斯抑爆技术的有效性和可靠性主要取决于抑爆介质的物理化学性质、控爆空间几何参数、爆炸特性参数和抑爆系统中爆炸探测方式等因素;结合瓦斯爆炸链式反应理论和探测技术的发展,研究应更多地关注抑爆过程的微观特性,揭示其详细的抑爆作用机理,为探寻新型高效、绿色抑爆材料提供更有力的理论支持。     

我国特种劳动防护用品产业分布特点分析

为了解我国特种劳动防护用品产业分布特点和产业市场集中程度,基于生产企业统计数据,估算我国特种劳动防护用品产业市场集中度;对比2017年和2010年数据,统计分析我国特种劳动防护用品产业的区域、产品种类、企业注册资金规模和企业从业人员数量的分布和变化,分析总结了产业发展呈现的特点,提出了加快我国特种劳动防护用品产业发展的相应建议。结果表明:当前我国特种劳动防护用品产业市场结构尚属于低集中竞争型;各区域生产企业数量按照东部、中部、西部和东北的顺序依次递减,东部生产企业占据全国企业总数的65%以上;一半以上企业的注册资金均大于1 000万元;以从业人员数量看,80%以上企业属于小型企业规模;与2010年相比,2017年我国特种劳动防护用品生产企业从业人员数量增加了6.67%,企业从业人员规模分布变化不明显,企业注册资金规模已由约7成企业在500万元以下转变为近7成超过500万元,产品种类增加了40%。研究结果可为我国劳动防护用品产业和安全产业的发展提供科学参考。     

城市生活垃圾集运设备研究

对城市生活垃圾的集运方式进行了研究与分析。介绍了所研究开发的链条型地平式垃圾中转站和采用楔型压头结构的压缩式垃圾中转站的关键技术     

基于多态模糊BN的石化动设备故障概率定量风险评估

石化行业的压缩机、泵等动设备故障模式多样,故障概率的不确定性较大,常用的风险评估方法无法实现对石化行业动设备失效概率的定量评估,限制了设备安全管理的准确性和有效性.基于贝叶斯网络(BN)可定量计算复杂系统失效概率的特点,利用故障模式与影响分析(FMEA)方法获取动设备风险事件的因果关系,将其映射为BN,并利用BN中节点...