Insight into the safety distance of ground and underground installations in typical petrochemical plants

Petrochemical plants are continuously turning into large-size corporations, the installations of facilities show a developing trend from ground to underground because of the difference in land using rate. In this regard, the safety distance of petrochemical equipment buried in both ground and underground cases were investigated based on risk assessment. As a case study, gasoline tank and LPG tank set on the ground and underground are singled out to compare the risks involved. The research showed that the setting case of installation had a great influence on safety distance. Two cases have 80% reduction of equivalent safety distance compared with the rest of the cases. It was found that when the gasoline storage tank was placed underground alone, the PLL value decreased by 36.7%. Only LPG tank was placed underground, and the PLL decreased by 6.33%, and the gasoline and LPG storage tanks were placed underground simultaneously, the PLL value declined by 42.3%. Thus, the layout of plants could be further optimized, which can greatly improve the performances of land use efficiency and safety. In addition, this paper, the selection of embedding methods and the sensitivity of underground case to overpressure was resumed from two aspects: soil properties and burial depth. For the soil properties, it was found that the water saturated sandy soil with high air content and the low density unsaturated sandy soil had better effects on weakening overpressure. Such properties are particularly beneficial to reducing the occurrence rate of accidents. In terms of burial depth, it can be observed that as the burial depth was changed from 0.5m to 1.1m, the value of overpressure has dropped dramatically. When the burial depth was 2m, the damage to personnel and buildings has been greatly reduced beyond 2m from the explosion center.     

Relations between Environmental Right for Citizens and the Right to Use Environmental Resources owned by Company and Enterprise

Abstract

From angles of administrative law and private law, the article analyzes relations between environmental right for citizens and the right to use environmental resources owned by company and enterprise and points out three principles to balancing two relations: A principle of equal protection, a principle that general interest is superior to special interest as well as taking an account for special interest, in specific circumstances, for example, in the circumstance that clashes between environmental and economic interests can not be avoided, policy makers can put an emphasis on more important social interest according after considering weight of each interest. Finally, the article reaches a conclusion that China should establish system of environmental right for citizens from legislative and administrative levels so that a harmonious society can be constructed with guarantee.     

Modeling and optimizing efficiency gap between managers and operators in integrated resilient systems: The case of a petrochemical plant

The reliability issue in complex industrial systems such as oil, gas, petrochemical companies, nuclear and aviation industries has been of great importance. Resilience engineering (RE) is a new attitude toward the improvement of safety and reliability in the stated systems. One of the challenges a resilient system might face is the gap between work as imagined by managers and work as actually done by operators. This study will introduce a new framework named integrated resilience engineering (IRE) as a result of developing the concept of RE. The data used in this research have been obtained by means of questionnaire from a petrochemical company. Thereafter, the efficiency of operators and managers are calculated in RE and IRE frameworks through data envelopment analysis (DEA) approach. Then, the gaps between managers and operators are analyzed in two frameworks. The results are indicative of a significant growth in the number of efficient operators and managers in IRE framework compared to RE framework. Besides, the efficiency mean of managers and operators in IRE framework has experienced the growth of 1.8% and 5% compared to RE framework, respectively. The efficiency gap between managers and operators in IRE framework has also enjoyed the improvement of 88% compared to RE framework. Generally, it can be said that the suggested items of this research has led to the betterment of managers and operators’ efficiency and of the efficiency gap between them. Therefore, these items can improve the resilience and safety of complex systems. The results of Spearman test show that there is a strong direct correlation between the DEA results in two frameworks. This is the first study that examines the efficiency gap between operators and managers based on the RE principles and by means of DEA approach.     

利用标准化法评价污染源

大连石化公司运用标准化法对该厂污染源进行了普查,进而对污染源做出了评价。以二蒸馏装置为例,对总排放口污染源的监测数据进行了标化处理,确定了主要的污染因子及污染源:石油类主要来自减压塔顶分离器;硫化物主要来自减压塔顶油、水分离器和常压塔顶油、水分离器;挥发酚主要来自减压塔顶油、水分离器。     

浅论环境影响评价在油田环境管理中的作用

新疆地区的环境较为敏感,油气田开发对环境的影响较大,围绕着油气田开发所开展的各项活动必须严格执行环境影响评价。文章介绍油气田开发环境影响特点,环境影响评价工作中存在的问题。加强油田环境管理的措施为:实施战略和区域环境影响评价,在可行性研究报告审查前提出环境保护建议,在设计阶段严格执行环评中提出的环境保护措施,严格执行HSE环境管理体系,建立和完善回顾性环境影响评价制度,制定新疆油田建设项目环境保护管理方面的规定。     

石油化工企业事故应急救援预案现状及改进建议

石油化工行业是一个高危行业 ,具有易燃易爆、高温高压、有毒有害的特点 ,发生事故的概率高 ,且后果严重。制定事故应急救援预案是风险控制措施的一个重要组成部分 ,可以有效地防止事故的扩大 ,减轻事故造成的财产和生命损失。笔者主要探讨应急救援管理层面上的问题 ;阐述了我国政府和有关部门在应急救援管理方面的有关规定 ,石化行业的应急救援体系 ;指出了目前事故应急救援预案存在的不完善、不规范 ,应急装备不完备和缺乏社会救援联动机制等问题 ;建议企业和政府联合制定应急预案 :形成企业、地方政府和国家三方事故应急救援联动机制 ,实现统一指挥 ,资源共享 ,协调作战 ,发挥整体应急救援能力。     

炼化废水絮凝剂筛选实验

中国石油大连石化公司的生产废水不仅具有炼化废水的复杂性,而且其中含有大量的氯离子,给絮凝药剂的筛选带来一定的困难。通过对715、728两种絮凝药剂的现场应用实验,找出了不同水质情况下的最佳投药量。实验结果表明,当污水中含油量大于100mg/L时,715药剂加入量控制在150～180mg/L,728的加入量为4mg/L,此时油、SS、COD、浊度的去除率分别为92%、41%、41%和82%。当污水含油量在30mg/L以下时,715药剂加入量为90～120mg/L,728加入量为2.7～3.3mg/L,此时油、SS、COD、浊度的去除率分别为74%、71%、38%和89%。经实验筛选出的这两种药剂可以利用现有的加药系统设备加入污水,加药处理后能提高出水的水质。     

Performance-based earthquake evaluation of a full-scale petrochemical piping system

Assessment of seismic vulnerability of industrial petrochemical and oil & gas piping systems can be performed, beyond analytical tools, through experimental testing as well. Along this line, this paper describes an experimental test campaign carried out on a full-scale piping system in order to assess its seismic behaviour. In particular, a typical industrial piping system, containing several critical components, such as elbows, a bolted flange joint and a Tee joint, was tested under different levels of realistic earthquake loading. They corresponded to serviceability and ultimate limit states for support structures as suggested by modern performance-based earthquake engineering standards. The so called hybrid simulation techniques namely, pseudo-dynamic and real time testing with dynamic substructuring, were adopted to perform seismic tests. Experimental results displayed a favourable performance of the piping system and its components; they remained below their yielding, allowable stress and allowable strain limits without any leakage even at the Near Collapse Limit State condition for the support structure. Moreover, the favourable comparison between experimental and numerical results, proved the validity of the proposed hybrid techniques alternative to shaking table tests.     

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.     

联合生物法处理炼油厂含油污泥的研究

大港石化公司采用联合生物法处理含油污泥,对使用好氧、厌氧工艺处理含油污泥的结果进行了探讨。实验结果表明:先进行好氧处理然后脱水再进行厌氧堆肥工艺处理含油污泥,除油率达到97.6%,除磷、钾的指标低于《城镇垃圾农用控制标准》(GB8172-87)的要求外,其他指标均符合该标准要求,且避免了二次污染。