绿色水处理技术的应用与发展

采用绿色水处理技术是实现水资源可持续发展、环境保护和生态安全的重要措施。文章列举了膜分离、绿色氧化、绿色絮凝以及超声波、微波、电磁场等环保水处理技术,以及在国内外的研究应用现状探讨了绿色水处理技术的发展趋势。     

Improving of photocatalytic activity of barium ferrate via bismuth and copper co-doping for degradation of paracetamol under visible light irradiation

Nanosized Ba_{1- x}Bi_xFe_1-xCu_xO₃（12–50 nm） with x values of 0, 0.01, 0.05, and 0.1 system was prepared using the Pechini method. Structural, morphological, surface and optical characterizations were performed for the prepared samples. Cubic phase was the predominant phase for the undoped BaFeO₃ and Bi and Cu co-doped BaFeO₃ samples. Minor phases of monoclinic Ba₂Fe₂O₅, orthorhombic BaFe     

碳黑改性TiO2薄膜光催化剂的研制

通过掺杂碳黑来提高TiO2薄膜光催化剂的吸附性能，消除固定膜反应体系中经常出现的传质限制问题，使催化剂的活性由未经改性的3.2mg/L提高到4.8mg/L，相当于浓度为0.2g/L DegussaP25TiO2悬浮体系的效果，同时研究了影响催化剂活性的主要制备条件，获得的适宜制备条件为浓硝酸添加量1.0mL，热处理温度500℃，热处理时间2h，最佳涂覆次数为8次。     

钙钛矿CaFeO_3光催化降解大红染料废水性能的研究

用柠檬酸络合法制备钙钛矿型复合氧化物CaFeO3,并以其为光催化剂对水溶性染料进行光催化降解实验。讨论了光催化反应时间、催化剂投加量、光照强度、pH值、以及外加氧化剂(H2O2)等因素对光催化活性的影响。实验结果表明:在催化剂投加量0.4g,降解时间180min,pH值2,光照强度200W,H2O2的投加量5mL时,大红染料的降解率可达99.83%。     

悬浮型和流化床型纳米TiO2光催化反应器研究进展

围绕避免催化剂沉积、提高光透过率和催化剂分离3个方面的问题,综述了国内外在悬浮型和流化床型光催化反应器的工艺设计及改良方面所取得的进展,对当前应发展的悬浮型和流化床型反应体系提出了建议。     

天然麦饭石负载TiO2的光催化性能研究

采用溶胶-凝胶法制备了二氧化钛负载于天然麦饭石表面热处理后得到复合光催化剂TiO2/麦饭石,并通过N2吸附-脱附、XRD及IR对其进行表征。探讨了以天然麦饭石为载体制备具有较高光催化活性的负载型TiO2/天然麦饭石复合物的各种影响因素:焙烧温度,加投量,pH值等。研究结果表明:200℃焙烧条件下TiO2/麦饭石复合物具有最大的光催化活性,达到了纯TiO2的光催化效果:对罗丹明B脱色率随着光催化剂增多而增大;对罗丹明B在pH值7～9时具有最大的降解率,开拓和优化TiO2光催化效能的新途径。     

Effect of molecular properties on the photocatalytic degradation rates of dichlorophenols and dichloroanilines in aqueous TiO2 suspensions

The kinetics of the photocatalytic degradation of 10 different dichlorophenols and dichloroanilines have been investigated experimentally and theoretically. With the intention of finding certain molecular indices in order to determine the degradation rates of aromatic pollutants, geometry optimizations of the compounds have been performed with the semiempirical PM3 method. The molecular orbital calculations have been carried out by an SCF method using the RHF formalism. The correlations between the apparent first-order rate constants and the calculated molecular properties of the compounds have been examined. Four different structure–activity relationships have been developed expressing the logarithms of the rate constants in terms of the Hammett constants, electron densities of the substituents, the coefficients and the energies of the highest occupied molecular orbitals HOMO, and 1-octanol/water partition coefficients log?K _OW.     

Photocatalytic activity of titanium dioxide modified concrete materials – Influence of utilizing recycled glass cullets as aggregates

Combining the use of photocatalysts with cementitious materials is an important development in the field of photocatalytic air pollution mitigation. This paper presents the results of a systematic study on assessing the effectiveness of pollutant degradation by concrete surface layers that incorporate a photocatalytic material – Titanium Dioxide. The photocatalytic activity of the concrete samples was determined by photocatalytic oxidation of nitric oxide (NO) in the laboratory. Recycled glass cullets, derived from crushed waste beverage bottles, were used to replace sand in preparing the concrete surface layers. Factors, which may affect the pollutant removal performance of the concrete layers including glass color, aggregate size and curing age, were investigated. The results show a significant enhancement of the photocatalytic activity due to the use of glass cullets as aggregates in the concrete layers. The samples fabricated with clear glass cullets exhibited threefold NO removal efficiency compared to the samples fabricated with river sand. The light transmittance property of glass was postulated to account for the efficiency improvement, which was confirmed by a separate simulation study. But the influence of the size of glass cullets was not evident. In addition, the photocatalytic activity of concrete surface layers decreased with curing age, showing a loss of 20% photocatalytic activity after 56-day curing.     

苯甲酸类物质的光催化降解及其QSAR

研究了１３种苯甲酸类化合物在固定膜平板型反应器中的光催化降解。首先用紫外辐射法将粉末二氧化钛固定在平板上；并研究了苯甲酸化合物在此平板上的光催化降解，考察了固定催伦剂下污染物的降解动力学，以及不同取代基团和取代位置对光降解速率的定性影响；最后探讨了苯甲酸物质光降解速率与其结构的定量关系。