Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Here, we focused on the recycling of waste printed circuit boards (WPCBs) using vacuum pyrolysis-centrifugation coupling technology (VPCT) aiming to obtain valuable feedstock and resolve environmental pollution. The two types of WPCBs were pyrolysed at 600°C for 30 min under vacuum condition. During the pyrolysis process, the solder of WPCBs was separated and recovered when the temperature range was 400-600°C, and the rotating drum was rotated at 1000 rpm for 10 min. The type-A of WPCBs pyrolysed to form an average of 67.91 wt.% residue, 27.84 wt.% oil, and 4.25 wt.% gas; and pyrolysis of the type-B of WPCBs led to an average mass balance of 72.22 wt.% residue, 21.57 wt.% oil, and 6.21 wt.% gas. The GC-MS and FT-IR analyses showed that the two pyrolysis oils consisted mainly of phenols and substituted phenols. The pyrolysis oil can be used for fuel or chemical feedstock for further processing. The recovered solder can be recycled directly and it can also be a good resource of lead and tin for refining. The pyrolysis residues contained various metals, glass fibers and other inorganic materials, which could be recovered after further treatment. The pyrolysis gases consisted mainly of CO, CO(2), CH(4), and H(2), which could be collected and recycled.     

国外建筑废弃物循环利用的经验及对我国的启示

伴随着建筑废弃物产生量的迅速增长,建筑废弃物循环利用已成为循环经济发展的重点领域。从完善的法律法规、深度循环利用方式和产业化发展等方面,对国外发达国家废弃物循环利用的经验和做法加以总结和提升,并结合我国实际,提出建立健全我国建筑废弃物法律法规体系、构筑多级循环利用模式和培育废弃物利用产业体系的几点启示,以期为我国相关部门制定建筑废弃物的相关政策制度、提高建筑废弃物的循环再利用水平提供参考和依据。     

Capacity building for food justice in England: the contribution of charity-led community food initiatives

This paper discusses the extent to which charity-led initiatives can contribute to capacity building for food justice in England. The paper draws on evaluations of two projects run by the charity Garden Organic: the Master Gardener Programme, operating a network of volunteers who mentor households, schools and community groups to support local food growing, and the Sowing New Seeds programme, which engages “Seed Stewards” to work with communities to encourage the growing and cooking of “exotic” crops. Based on qualitative data about peoples’ motivations for participation and the benefits that are experienced, we interpret these projects as examples of capacity building for food justice. We suggest that whilst currently depoliticised, the “quiet” process of reskilling and awareness raising that occurs through shared gardening projects could have transformative potential for people’s relationship with food. Finally, we use our findings to raise critical questions and propose future research about food justice concepts and practices.     

金属冶炼进口物料的固体废物鉴别方法

建立了金属冶炼进口物料的固体废物鉴别方法,并利用该方法对海关查扣的3种金属冶炼进口物料进行了固体废物鉴别。鉴别结果显示:物料1、2和3的自然属性分别为砷含量超标铜精矿、锰阳极泥、回转窑氧化锌,产生来源分别为有害物质超标的产品、污染控制设施产生的物质、有意识加工的目标产物;物料1和2属于我国禁止进口的固体废物,物料3不属于固体废物。本文建立的固体废物鉴别方法可行,可为金属冶炼进口物料的固体废物鉴别和监管提供参考。     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

复合材料静态处理煤矿高浓度含锰废水的研究

针对目前云南省某煤矿排放废水中Mn~(2+)超标的问题,利用一种新型复合材料进行除锰试验.该复合材料是纳米分子筛与硅藻土经合理复配后,掺入复配絮凝荆形成的.试验中优化了不同材料的复合方式、絮凝剂的复配比例与用量.利用复配的多孔材料,对云南某煤矿含有大量悬浮物、Mn~(2+)质量浓度为5.32 mg/L的黑色废水及Mn~(2+)质量浓度为42.mg/L的红褐色废水进行了Mn~(2+)去除效果研究.结果表明,黑色废水中Mn~(2+)去除率达到70%,出水pH值为7.9;红褐色废水中Mn~(2+)去除率达到91.0%,出水pH值为7.1.与此同时,还研究了废水中Fe~(3+)、固体悬浮物(SS)对Mn~(2+)去除效果的影响,废水中Fe~(3+)的存在使pH降低,并与Mn~(2+)产生竞争吸附,对复合材料除锰有不利影响,而SS的存在对Mn~(2+)的去除效果没有显著的影响.     

突发事件现场警戒区域的研究

阐述了事故危险区域、现场警戒区域的基本概念、设置目的和原则,提出将突发事故现场警戒区域分为三层,分别对应现场封锁线、警戒封锁线和交通封锁线,并就吸入毒性危害物质泄漏、燃气泄漏、建筑物火灾等事故,制定了具体的设置方法。现场警戒区域的设定,可在较小成本投入的前提下,通过采取积极的防范和应对措施,有效减少人员伤亡和财产损失,提高救援效率和效果。     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.     

燃煤锅炉机组电改袋工程成功案例分析

以宝钢电厂3#机组电改全袋工程为例,论述了该成功工程的特点,介绍了袋式除尘器及滤料的比选过程、结构型式和设计参数,总结了除尘系统所具有的技术特色和投运后所取得的效果,该案例对袋式除尘器在电站锅炉的推广应用具有参考意义。     

秦皇岛市“创模”对策研究及效益分析

介绍了秦皇岛市创建国家环境保护模范城市的意义,重点阐述了完成创模任务的主要对策,包括:构建以旅游业为中心、特色产业互融互促的现代产业体系;加快城乡一体化建设;提升城镇发展质量和水平;加强重大基础设施建设;积极推广清洁能源,深入开展工程节能;积极推进循环经济发展等。秦皇岛市创建国家环境保护模范城市,将会在环境、经济和社会三方面产生明显的综合效益。