A very simple yet accurate solution to the thermal explosion problem

A very simple solution to the thermal explosion problem for one-dimensional solids is presented. The solution produces analytical expressions for the criticality condition. Two different solutions are used. One solution gives higher answers than those known from exact solutions and the second solution gives lower answers. This allows bracketing the expected answer with a determined tolerance. The results obtained compare quite favorably with those obtained from known exact numerical solutions. This allows the utilization of the present method for many a practical problem with an acceptable tolerances.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

锅炉型煤质量的影响因素分析

分析了配煤组分、成型工艺条件、型料粒度等方面对工业型煤质量的影响，指标合理确定惰性组分含量、成型水分和型料粒度组成是型煤生产的关键，并对实际生产提供帮助。     

高流速海水中舰艇常用材料腐蚀实验研究

介绍了舰艇常用材料在海水环境动态高流速条件下自然电位、自然腐蚀率、电偶腐蚀等多方面的腐蚀实验方法及实验结果,得出了舰艇常用系列材料在动态海水中的腐蚀基本数据以及变化规律,为在舰船设计中材料的选择及腐蚀防护方案的制定提供参考。     

块体纳米材料的制备及其应用

综述了块体纳米材料的制备技术及其发展 ,指出了常用方法存在的问题 ,并在此基础上论述了块体纳米材料的性能、应用及其发展趋势     

酸雨对苏州市文物古建筑的影响初探

近年来，苏州市区酸雨出现频率增加，降水pH值下降，威胁着众多的文物古建筑。因此从苏州现存文物古建筑的五种材质入手，剖析酸雨对文物古建筑的影响，并对国家重点保护文物罗汉院双塔及正殿遗址典型的案例进行了剖析。     

染色残液电化学处理碳素阴极材料性能比较

为实现染色残液的高效处理及废水回用,鉴于染色残液良好的导电性,选用电化学处理技术,以模拟活性红X-3B染色残液为研究对象,在钌铱形稳电极为阳极和合适的电解条件下,比较石墨板、石墨毡、炭毡、ACF（活性炭纤维毡）、碳纤维电极〔CFF（碳纤维布）、CFB（碳纤维刷）〕等碳素阴极材料的电化学处理效能.结果表明:碳素阴极材料可实现染色残液的完全脱色,活性红X-3B的降解过程符合一级反应动力学特征,其中CFF为阴极时COD_Cr去除率达到86.37%,一级动力学反应常数为0.010 3 min-1,是石墨毡（0.007 3 min-1）的1.4倍.相比于石墨板电极,CFB显示出优异的二电子氧还原和产H₂O₂能力,单位面积产H₂O₂的浓度为10.40 μmol/L,是石墨板（1.08 μmol/L）的9.7倍,产生的H₂O₂导致活性红X-3B的降解,30 min内实现完全脱色.循环伏安曲线表明,碳纤维电极（包括CFF和CFB）的析氧电位明显高于其他电极,可有效抑制析氧副反应,提高有机污染物降解过程中的电催化效率,有利于降低能耗.研究显示,碳纤维可作为阴极材料应用于电化学处理染色残液,具有良好的稳定性.      

磁性核壳CoFe2O4@SiO2@PIL-AO复合材料的制备及其吸附U (VI)性能研究

通过化学合成法制备了磁性核壳CoFe₂O₄@SiO₂@PIL-AO复合材料,采用傅立叶变换红外光谱（FTIR）、扫描电镜（SEM）和X射线光电子能谱（XPS）对其进行了表征,研究了溶液pH、吸附时间、U （VI）初始浓度和温度等参数对U （VI）吸附性能的影响.实验结果表明：在c₀=0.2 mg·L^-1、pH=6.00±0.05、T=298.15 K、m=0.02 g和t=8 h的条件下,CoFe₂O₄@SiO₂@PIL-AO对U （VI）的吸附作用最强,吸附率达到了97.54%;CoFe₂O₄@SiO₂@PIL-AO吸附U （VI）是一个自发进行的吸热反应,U （VI）吸附动力学符合准二级动力学模型,吸附等温线符合Freundlich模型;CoFe₂O₄@SiO₂@PIL-AO复合材料具有良好的可循环使用性,循环使用5次后它对U （VI）的吸附容量没有明显下降,可重复使用.     

基于物元分析法的古建筑火灾风险评价

古建筑火灾风险评估是突发事件应对中"关口前移"的体现,以物元分析法为基础提出了古建筑火灾风险评价的物元模型,并对某世界名镇内古建筑进行风险评估。首先,在火灾风险影响因素的事故树分析基础上,选取能够反映古建筑火灾风险特性的51个指标作为评价指标体系;其次,建立古建筑火灾风险评价的物元模型;最后,根据实地调研数据进行标准化赋值,实现对古建筑火灾风险的定量化评价,通过评价方法对比验证了模型有效性和先进性。结果表明,所评价建筑的总体关联度系数为-0.248,四项"优秀"级别指标关联度分别为-0.129、-0.183、-0.211、-0.216,两项"较差"级别指标关联度为0.025、-0.016,表明所评价建筑火灾风险等级的显性结果为"优秀"级别,但隐性结果为"良好+"级别,火灾风险等级潜在提升能力较强。     

加氯消毒过程中纯细菌物质生成消毒副产物研究

按照UFC方法对水体中3种常见细菌Acinetobacter junii、Staphylococcussciuri和Escherichia coli进行纯细菌加氯消毒处理,同时考察水中溴离子对纯细菌物质生成DBPs的影响.结果表明,3种细菌均为DBPs前体物,加氯消毒生成的DBPs除水合三氯乙醛(CHD)外,生成的三卤甲烷(THMs)物质主要为氯仿(TCM),卤乙腈(HANs)物质主要为二氯乙腈(DCAN).氯仿的生成量与细菌物质TOC浓度无明显关系,但HANs和CHD生成量均随细菌TOC浓度增大而增加.其中革兰氏阳性细菌Staphylococcus sciuri生成的DCAN和CHD比革兰氏阴性细菌Acinetobacter junii和Escherichia coli生成的要高,说明细胞壁的化学组分可能是DCAN和CHD生成的影响因素之一.Escherichia coli细菌反应液中溴离子(Br-)存在时,除生成CHD、TCM及DCAN外,THMs和HANs中的溴代种类CHBr3随Br-增多而持续增加,相反TCM持续减少.当Br-浓度为4mg.L-1时,TBM浓度增至最高127.9μg.L-1;HANs和CHD生成量随Br-浓度增加先有所增加,随后持续降低至低于检测限;Br离子存在时THMs为主要DBPs种类.