火灾烟气中有毒气体的体积分数分布与危害

研究火灾烟气的成分与其体积分数分布是火灾科学的一项重要内容。为了更好地研究建筑火灾烟气的释放过程并为建筑材料评价提供依据，采用文献综述的方法论述了建筑火灾烟气的主要有毒成分、体积分数范围(即浓度范围)与危险含量(即危险浓度)，还介绍了常用的烟气分析方法，说明了对火灾烟气的产生机理和火灾烟气成分的检测方法等还需要进行深入的研究。     

海上溢油应急物资调度双目标规划模型

为最大程度降低溢油事故造成的不利影响,提出充分考虑海上油膜漂移特性及溢油点和漂移点对救援物资需求不确定等特点,基于鲁棒优化思想,建立救援应急成本最小、应急时间最短的双目标规划模型,并基于NSGA-Ⅱ算法设计求解方法。结果表明:决策者可根据自身对溢油事故规模的判断,得到不同应急物资调度方案,为应急出救点的选择和物资调度提供合理决策依据。     

Green and efficient degradation of cefoperazone sodium by Bi4O5Br2 leading to the production of non-toxic products: Performance and degradation pathway

Photocatalytic process represents a promising approach to overcome the pollution challenge associated with the antibiotics-containing wastewater. This study provides a green, efficient and novel approach to remove cephalosporins, particularly cefoperazone sodium (CFP). Bi₄O₅Br₂ was chosen for the first time to systematically study its degradation for CFP, including the analysis of material structure, degradation performance, the structure and toxicity of the transformation products, etc. The degradation rate results indicated that Bi₄O₅Br₂ had an excellent catalytic activity leading to 78% CFP removal compared with the pure BiOBr (38%) within 120 min of visible light irradiation. In addition, the Bi₄O₅Br₂ presents high stability and good organic carbon removal efficiency. The effects of the solution pH (3.12 - 8.75) on catalytic activity revealed that CFP was mainly photocatalyzed under acidic conditions and hydrolyzed under alkaline conditions. Combined with active species and degradation product identification, the photocatalytic degradation pathways of CFP by Bi₄O₅Br₂ was proposed, including hydrolysis, oxidation, reduction and decarboxylation. Most importantly, the identified products were all hydrolysis rather than oxidation byproducts transformed from the intermediate of β-lactam bond cleavage in CFP molecule, quite different from the mostly previous studies. Furthermore, the final products were demonstrated to be less toxic through the toxicity analysis. Overall, this study illustrates the detailed mechanism of CFP degradation by Bi₄O₅Br₂ and confirms Bi₄O₅Br₂ to be a promising material for the photodegradation of CFP.     

防烟空气幕防烟有效性模拟实验研究

利用火灾模拟软件FDS,以四川消防研究所高层实验塔二层为原型建立模型,对防烟空气幕的防烟有效性进行研究。本次实验在前室内设置测点,测定前室内的温度及CO浓度。实验结果表明:在未设置防烟空气幕时,前室内1.25m高度以上的测点温度稳定后均在35～45℃之间,CO浓度最大达到180ppm;在设置风幕后,前室内1.25m高度以上的测点温度稳定后在20～30℃之间,CO浓度最大为75.7ppm。因此,防烟空气幕能有效的减少烟气的进入量,降低进入前室的烟气的温度及有害气体浓度,为人员的安全疏散赢得时间。     

基于生命周期评价理论的建筑物环境影响评价系统

建筑物对环境有着巨大的影响。基于生命周期评价(LCA)理论,从材料的开采生产,建筑物的建造、运行直至建筑物被拆除来研究建筑物的环境影响。在一个涉及建筑材料、建筑设备以及建设场地的环境影响数据库的基础上,开发了一个建筑物的环境影响的评价模型BEPAS(BuildingEnvironmentalPerformanceAnalysisSystem)。模型从3个方面:建筑设备运行、建筑材料和建筑场地来研究建筑的环境影响。最后,测算了一个案例,分析了其环境影响水平。     

轻型厂房的几种基础型式经济性比较

针对上部结构荷载不大，场地内回填土较厚且回填时间较长的某一轻型厂房，笔者选择人工挖孔桩，冲击式夯扩桩和换土垫层三种不同的基础施工方案进行比较，在保证强度、刚度、稳定性和严格控制基础沉降的前提下，从不同的角度作出工程技术经济分析，对类似工程具有一定的参考作用．     

钝化材料对Cd污染农田修复及其后效探究

在田间试验条件下,考察不同钝化材料对农田Cd轻度污染水稻修复效果及稻麦轮作后第二年水稻修复后效.结果表明,在轻度Cd污染农田中,各钝化材料处理均能不同程度降低土壤有效态Cd含量和水稻籽粒中Cd含量.其中,在钝化材料施用当季和稻麦轮作后第二季水稻中修复效果最好的处理为中量纳米材料处理和石灰配施中量纳米材料处理,这两种处理...     

伪装遮障材料耐老化性能与机理分析

目的 研究伪装遮障材料在实用期的老化机理,获悉伪装遮障材料失效的主要环境因素。方法 通过分析伪装遮障材料在自然环境和实验室单因素环境中的性能变化,得出影响伪装遮障材料老化失效的主要因素。采用扫描电子显微镜、红外光谱仪、X射线光电子能谱仪表征材料的微观形貌、化学结构和化学成分变化,解释伪装遮障材料的老化机理。结果 获得了在不同自然环境、实验室单因素环境下,伪装遮障材料颜色外观和力学性能的变化规律,得到了伪装遮障材料在老化过程中发生的微观形貌、化学结构和化学成分变化。结论 伪装遮障材料在西双版纳自然环境下的老化程度最大,在济南自然环境下的老化程度最小。光照是导致伪装遮障材料颜色外观及力学性能降低的主要因素。老化过程中,主要是材料表面的聚氨酯发生老化、脱落,导致材料的力学性能下降。伪装遮障材料破坏时,纤维有2种失效形式,一种是纤维脱黏、直接断裂;另一种是纤维脱黏,拔出,或者拔出过程中断裂。     

高速冲击下多胞材料细观结构中波传播规律

目的 获取安全防护结构中细观多胞材料在高速冲击下的波传播规律.方法 采用基于3D-Voronoi细观多胞结构数值仿真和基于最小二乘法的局部应变梯度法,研究细观多胞结构在高速冲击下的冲击波波阵面传播规律.通过细观多胞结构数值仿真提取的位移场数据,结合局部应变梯度法得到界面清晰的冲击波波阵面.结果 冲击端和支撑端分别诱发右...     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.