利用煮茧废水培养钝顶螺旋藻的初步研究

本文对缫丝厂煮茧废水和Ｚａｒｒｒｏｕｋ培养基的主要营养成份进行了分析比较，筛选出了适合钝顶螺旋藻（Ｓｐｉｒｕｌｉｎａｐｌａｔｅｎｓｉｓ）在煮茧废水中生长繁殖的培养基和与之相适应的驯化藻种。经室外１５０升煮茧废水扩大培养，干藻生物量可达１６．０３克／米￣２·天，粗蛋白含量达５８．６％，含有１７种氨基酸。比用Ｚａｒｒｏｕｋ培养基培养的螺旋藻产量提高１５．７８％，成本减少８０％以上。培养后的煮茧废水ＣＯＤ和ＢＯＤ＿５浓度低于我国污水综合排放标准。研究结果表明：采用本实验室筛选的煮茧废水培养基和驯化藻种，在煮茧废水中大量培养螺旋藻，实现废水资源化是可行的，具有明显的经济效益和环境效益。     

Wastewater reuse in Muslim countries: An Islamic perspective

Recycling wastewater seems to have become a highly useful technique for meeting the shortage of fresh water in all parts of the world. It seems all the more important for Muslim countries because a large number of these countries face acute fresh water shortage. This paper views the problem from an Islamic viewpoint, that is, in the light of the Qur'n, theSunnah, andFiqh works.In Islamic law, water is classified into three categories oftahr,thir, andmutanajjis. The last two categories can be transmuted intotahr water and thus may be used for all mundane as well as religious purposes if they are assimilated into the overall supply oftahr water. This would be lawful from the Islamic viewpoint even without treating the water. To make use of modern technology in order to recycle wastewater effluents after treatment seems quite in keeping with the spirit and letter of the Islamic teachings.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

浙江省废纸再生产业的经验、问题及对策

文章分析了浙江省在废纸再生方面的3个典型模式的经验，指出了存在的问题并提出了建议对策。     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.     

AN OPTIMIZATION MODEL FOR EFFICIENT MANAGEMENT OF URBAN WATER RESOURCES1

ABSTRACT: A mathematical programming model is proposed to determine economically efficient urban water resource allocation and pricing policy by maximizing the sum of the consumer and producer surplus. The optimization of this nonlinear problem is accomplished by the use of linear programming algorithm. The feasibility of using recycled water for municipal purposes is examined in a planning context. The impact of higher water quality discharge standards on pricing and allocation of water is analyzed and the attractiveness of water reuse option is demonstrated.     

The long and winding road to resource efficiency – An interdisciplinary perspective on extended producer responsibility

Extended producer responsibility is advocated for its capacity to spur resource efficiency through green innovation and closing loops downstream of consumption. Its rationale is the extension of the polluter-pays principle to the post-consumption phase. This paper analyze the underlying mechanisms that are supposed to work under the EPR approach, and proposes an alternative view. The main purpose of EPR is seen as the creation of the bases for legitimizing the involvement if industry taking over the task of diverting waste from landfill. Its success rests on the superior managerial capacity of industry and the need to organize post-consumption markets that transcend the local scale and have access to the economies of scale and scope. The emphasis on producers does not add anything special, but may reinforce the bases for legitimizing the implicit delegation of power to industry. Primary and above all, we have witnessed in the last 20 years a gigantic effort of market design, and this is the main demonstration of EPR's success.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

Mechanical recycling of EOL concrete into high-grade aggregates

Recycling End of Life (EOL) concrete into high-grade aggregate for new concrete is a challenging prospect for the building sector because of the competing constraints of low recycling process cost and high aggregate product quality. A further complicating factor is that, from the perspective of the environment, there is a strong societal drive to reduce bulk transport of building materials in urban environments, and to apply more in situ recycling technologies for Construction & Demolition Waste. The European C2CA project investigates a combination of smart demolition, grinding of the crushed concrete in an autogenous mill to increase the liberation of cement mortar from the surface of aggregates and a novel dry classification technology called ADR to remove the fines. The feasibility of this recycling process was examined in a demonstration project involving 20,000 tons of EOL concrete from two office towers in Groningen, the Netherlands. Results show that the +4 mm recycled aggregate compares favorably with natural aggregate in terms of workability and the compressive strength of the new concrete, showing 30% higher strength after 7 days.     

100% recycled hot mix asphalt: A review and analysis

A holistic evaluation of the feasibility of producing 100% recycled mixtures is presented. Eleven technologies readily available for producing 100% Reclaimed Asphalt Pavement (RAP) hot asphalt mixtures are described in the article and the complementary video (http://youtu.be/coj-e5mhHEQ). The recorded performance of 100% RAP mixtures is analyzed along with identification of typical high RAP distresses. Recommended mix design procedures and the best RAP management strategies are described. A cradle-to-gate analysis of environmental effects indicated 18 kg or 35% CO₂eq savings per t of produced 100% RAP asphalt mixture compared to virgin mix, while cost analysis showed at least 50% savings in material related expenses.