Spatial variability of ammonium and nitrate in soils near a poultry farm

This paper assesses the distribution of ammonium (NH4+) and nitrate (NO3-) nitrogen deposition in native bushland soil adjacent to an open ventilated poultry farm. The farm is located in Thirlmere 150 km south west of Sydney, Australia. A total of 104 geographically referenced soil cores were obtained from the study area. Soil pH, electrical conductivity (EC), NH4(+) - and NO3(-)-nitrogen concentrations were analysed for variable trends at three depths, i.e. 0-30, 30-60, and 60-90 cm. Significantly higher concentrations of the two nitrogen forms and EC were observed nearer to the farm in the surface soil samples (0-30 cm). The distribution of NH4+, NO3- and EC were all correlated in surface samples throughout the study area. There was no indication of NH4+ and NO3- leaching within soil profile sampled and it appears that weeds and native vegetation had utilised the accumulated nitrogen. The level of N deposition adjacent to the poultry farm decreased downwind due to dispersion of plume and to the buffering effects from the bushland.     

An Estimate of Biogenic Emissions of Volatile Organic Compounds during Summertime in China (7 pp)

Background and Aim An accurate estimation of biogenic emissions of VOC (volatile organic compounds) is necessary for better understanding a series of current environmental problems such as summertime smong and global climate change. However, very limited studies have been reported on such emissions in China. The aim of this paper is to present an estimate of biogenic VOC emissions during summertime in China, and discuss its uncertainties and potential areas for further investigations. Materials and Methods This study was mainly based on field data and related research available so far in China and abroad, including distributions of land use and vegetations, biomass densities and emission potentials. VOC were grouped into isoprene, monoterpenes and other VOC (OVOC). Emission potentials of forests were determined for 22 genera or species, and then assigned to 33 forest ecosystems. The NCEP/NCAR reanalysis database was used as standard environmental conditions. A typical summertime of July 1999 was chosen for detailed calculations. Results and Discussion The biogenic VOC emissions in China in July were estimated to be 2.3×10¹²gC, with 42% as isoprene, 19% as monoterpenes and 39% as OVOC. About 77.3% of the emissions are generated-from forests and woodlands. The averaged emission intensity was 4.11 mgC m⁻² hr⁻¹ for forests and 1.12 mgC m⁻² hr⁻¹ for all types of vegetations in China during the summertime. The uncertainty in the results arose from both the data and the assumptions used in the extrapolations. Generally, uncertainty in the field measurements is relatively small. A large part of the uncertainty mainly comes from the taxonomic method to assign emission potentials to unmeasured species, while the ARGR method serves to estimate leaf biomass and the emission algorithms to describe light and temperature dependence. Conclusions This study describes a picture of the biogenic VOC emissions during summertime in China. Due to the uneven spatial and temporal distributions, biogenic VOC emissions may play an important role in the tropospheric chemistry during summertime. Recommendations and Perspectives Further investigations are needed to reduce uncertainties involved in the related factors such as emission potentials, leaf biomass, species distribution as well as the mechanisms of the emission activities. Besides ground measurements, attention should also be placed on other techniques such as remotesensing and dynamic modeling. These new approaches, combined with ground measurements as basic database for calibration and evaluation, can hopefully provide more comprehensive information in the research of this field. Submission Editor: Prof. Dr. Gerhard Lammel (lammel@recetox.muni.cz)     

Atmospheric lead and bromine in Germany: post-abatement levels,variabilities and trends

INTENTION, GOAL, SCOPE, BACKGROUND: Abatement measures since the 1970s have depleted lead and bromine levels in the atmosphere over large parts of Europe. Our knowledge of the atmospheric cycling of these elements while a several decade-long period of intensive mobilization reaches its end is incomplete. OBJECTIVE: We have characterized the trends in the atmospheric levels of Pb and Br and present-day temporal and spatial variabilities. METHODS: This was achieved by short-term (weeks) and long-term (years) measurements of particulate Pb and Br at various sites in Germany. Samples of atmospheric particulate matter were collected on filter membranes and analyzed by x-ray fluorescence. RESULTS AND DISCUSSION: Average Pb levels at rural and urban inland sites did not exceed concentrations in background aerosols, sampled at a Baltic Sea coastal site, by more than a factor of 3. Due to sea salt, bromide inland particulate Br levels are below those at a coastal site. There, non-sea salt Br, however, is significant as well. Urban Pb and Br levels are not necessarily higher than rural levels. The concentration levels have decreased in such a way that the previously common source, local vehicular traffic emissions, is no longer predominant. Regional rather than local sources have been increasingly determining the concentrations since the 1990s. This is more pronounced for Br than for Pb. We found indications for coal burning and long-range transport as significant Pb sources. For particulate Pb species, a range of ages (elapsed time since Pb emission) has been found. This range shows two maxima corresponding to characteristic times of 72 and 24 h. CONCLUSIONS: The (mean) atmospheric residence time of particulate Pb is longer than the residence time of Br, in particular in the wintertime. The chemical species contributing to atmospheric Pb should be addressed in future studies. RECOMMENDATION AND OUTLOOK: Clearly, despite effective abatement measures, atmospheric Pb will continue to be dominated by anthropogenic mobilization. The influence from long-range transport can be expected to decrease with the effectiveness of abatement programmes in neighbouring countries of the region.     

Source characterization and identification by real-time single particle mass spectrometry

A Real-Time Single Particle Mass Spectrometer, RSMS-3, was deployed to Wilmington, Delaware to study regional and local contributions to fine and ultra-fine urban particulate matter (PM). Approximately two-thirds of PM₁ consisted of internally mixed secondary aerosol. The remaining one-third was externally mixed including biomass burning (13%), fossil fuel combustion (7%) and various industrial sources (13%). In this last group, particle classes containing specific combinations of transition and/or heavy metals gave wind-rose plots consistent with specific point sources. For example, particles containing V and Ni were detected from different wind directions than those containing V and Fe. Samples from two industrial emission stacks, a steel manufacturing facility 10 km away and a coal-fired electrical power generation facility 5 km away, were analyzed and compared to the ambient data set. In each case, a direct correlation was found: a Pb–Zn–K–Na class for the steel manufacturing facility and an Fe–La/Ce class for the power generation facility. The ambient particle classes showed additional small signals from secondary components indicating atmospheric processing. Ambient particle classes containing only a subset of these elements, such as Zn only, Fe only and Pb–K only, were nonspecific, that is, the wind-rose plots were more diffuse and the particles could not be mapped to individual sources. The merits of stack sampling as an aid to interpreting single particle data sets are discussed.     

Project of an Air Quality Monitoring Network for Industrial Site in Italy

In this paper results concerning project of an atmospheric monitoring network applied to an area of south of Italy carried out using chemical measurement campaigns (for traffic emissions characterisation couple with diffusional simulation of industrial pollutant emissions will be presented. The area selected is characterised by an high concentration of high environmental impacting industrial activities, with also high concentration of urban settlement and vehicular traffic. A comprehensive definition of all the monitoring system to be installed in order to have a correct monitoring system for the all province will be described and discussed.     

The performance evaluation of WinOSPM model for urban street canyons of Nantes in France

Air quality modelling is primarily the quantative approach. It is more difficult as it demands input data accuracy, uncertainties and the efficient methodologies to judge the extent of models accuracy. As a result, model validation has to be regarded as an integral part of the modelling process. Furthermore, models are often validated on a limited number of testcases therefore, appropriate evaluation procedure must be implemented to ensure these models will be applicable for various conditions. The study presented here was carried out to evaluate theWinOSPM (Preliminary version of windows based Operational Street Pollution Model) for air pollutants viz. CO, NO, NO₂, NO_x and C₆H₆ for three street canyons of Nantes (France) and for the three base years 1999, 2000, and 2001. Each street canyon selected for this study has typical and unidentical features. The rue de Strasbourg and Boulevard Victor Hugo have many building exceptions whereas rue Crébillon has not any. Application of the model above to the three street canyons revealed that WinOSPM could be used in the case when measurements are not available. This was justified from the results at rue Crébillon. The special interest was in the benzene modelled values as its content in fuel has been targeted to reduce to 1% for the years 2000 and onwards (from its 5% until the year 1999). The 50 to 70% reduction in the benzene concentrations is found for both the years i.e. in 2000 and 2001. This has further justified that air quality models are useful and interesting tools in optimising emission reduction strategies. Moreover, it is also the new pollutant added to the measurement campaign of Air Pays de la Loire (APL) for the city of Nantes. For benzene weekly averages are estimated from the hourly-modelled values for all the streets and compared with that of measurements. They are found in excellent agreement with each others. For other pollutants annual means and percentiles were compared. The statistical analysis was done to evaluate the models performance using index of agreement and correlation coefficient. The index of agreement (d) and correlation coefficient (r) for all the streets show that estimated concentration levels are in good agreement with that of measurements. From the index of agreements, it can be inferred that model has very less potential for errors. The models sensitivity to building-exceptions was also tested for the rue de Strasbourg. Results did not reflect this feature very well. It is perceived that the influence of this feature might have been suppressed in averaging the annual hourly values. This influence is apparently seen in hourly average time series variations. Finally, WinOSPM model was found a simple but very useful model. It could very well represent the detailed flow and dispersion conditions in urban streets.     

Modelling and assessing inter-regional trade of CO2 emission reduction units

A cost-efficient way to allocate carbon dioxide (CO₂) emission reductions among countries or regions is to harmonise their marginal reduction costs. This could be achieved by a market of emission reduction units (ERUs). To model such a market, we use a multi-regional MARKAL-MACRO model. It gives insights into the consequences of co-ordinating CO₂ abatement on regional energy systems and economies. As a numerical application, we assess the establishment of a market of ERUs among three European countries for curbing their CO₂ emissions.     

排污单位自行监测检查中发现的典型问题及改进建议

排污单位自行监测的质量管理,是环境管理部门关注的重点。针对排污单位自行监测工作中存在的质控措施不规范;监测结果公开不完整;样品交接记录、原始采样记录、样品分析原始记录不齐全;流量计未检定或过期等问题。从自行监测方案的制定、自行监测信息公开、企业手工监测、企业自动监测等4个方面提出:应实施具体的质控措施;将污染物排放方式及排放去向、未开展自行监测的原因等方面的内容全部公开;通过计量认证第三方环境监测机构制订相关的记录单;将流量计送至计量单位实验室检定或者请计量单位现场检定等建议,对今后促进排污单位提高自行监测工作水平有指导意义。     

Impact of emission reduction on aerosol-radiation interaction during heavy pollution periods over Beijing-Tianjin-Hebei region in China

In December 2015, the Beijing-Tianjin-Hebei (BTH) region experienced several episodes of heavy air pollution. The government immediately issued emergency control measures to reduce the pollution, which provided a good opportunity to explore the impact of emission reduction on aerosol-radiation interaction. In this study, four tests were conducted, including the base1 simulation with emission reduction and aerosol-radiation interaction on, the base2 simulation with emission reduction and aerosol-radiation interaction off, the scenario1 simulation without emission reduction and aerosol-radiation interaction on and the scenario2 simulation without emission reduction and aerosol-radiation interaction off. We find that the aerosol-radiation interaction decreased the downward shortwave radiation and the temperature at 2 m, reduced the planetary boundary layer height (PBLH) in the region, and increased the relative humidity at 2 m, which is favorable for pollution accumulation. Our results revealed that the interaction effect due to emission reductions increased downward shortwave radiation by an average of 0–5 W/m², leading to increase in surface temperature of 0–0.05°C, increase in the daytime mean PBL high of 0–8 m, and decrease in daytime mean relative humidity at 2 m of 0.5%. We found that if there were aerosol-radiation interaction, it would enhance the effectiveness of emission control measures on air pollution control. The enhance of PM_2.5 (particulate matter less than 2.5 µm), PM₁₀ (particulate matter less than 10 µm), and NO₂ (nitrogen dioxide) emission reduction effects reached 7.62%, 6.90%, 11.62%, respectively, over this region.