Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.     

印制电路板项目竣工验收监测工作探讨

以福建省莆田市为例,研究分析了印制电路板项目竣工环境保护验收监测现场踏勘中存在的问题,提出要加强对项目的现场核查,以及对环保设施建设及运行、建设内容变更、环境风险、危险废物处理等的建议与对策。     

“混凝沉淀+纳米零价铁”处理印刷电路板生产废水中试研究

提出一种新纳米零价铁反应器(Nanoscale Zero-Valent Iron Reactor,简称NIR)及"混凝沉淀+纳米零价铁"处理工艺,通过实际生产废水进行中试,考察和研究该工艺和NIR技术处理江苏省某市印刷电路板(Printed Circuit Board,简称PCB)工业园区废水的效果。结果表明,此工艺对PCB生产废水中Cu、TP及COD Cr去除率分别可达到97.3%、73.7%、26%,其中Cu处理效果最佳;XRD结果表明,纳米零价铁(Nanoscale Zero-Valent Iron,nZVI)与PCB生产废水反应后含有γ-Fe2O3、Fe3O4、γ-FeOOH、CuO、Cu2O、Cu0等产物。"混凝沉淀+纳米零价铁"工艺处理废水时具有处理效果好、工艺耐冲击性能好、产泥量小、不易造成二次污染等优点。     

基于加热改性预处理废线路板的热力学作用过程研究

电子废物是固体废物环境管理的热点问题,而废线路板是电子废物的研究核心.废线路板是由铜箔、树脂和增强材料层压而成的复合材料,以破碎和分选过程相组合的机械物理方法是其资源化回收处理的主流技术,就如何提高破碎效果已成为机械物理技术发展面临的难题.研究提出了加热改性预处理的技术方法,用于废线路板结构物理改性和微观破坏,以提高破碎解离效率,其可实现金属与非金属的高度解离.基于改性处理技术,本文还分别从微观和宏观破坏力学角度,探究了加热改性处理机制.同时,结合ANSYS有限元热应力模型,对改性作用进行了理论分析.     

袋式除尘器进气均布板结构参数对气流分布的影响分析

针对袋式除尘器的进气均布板主要结构参数对气流分布影响的问题,采用正交试验方法进行CFD模拟试验设计,并以气流速度相对均方根σ值作为气流均匀性的评价指标。研究结果给出了σ与板数n、板长L、挡板上端距灰斗顶部截面高度ΔH、挡板前后偏角θ及过滤风速v之间的函数关系式。表明适当增加n、增大ΔH和θ、减小L、降低v,可以提高进气流分布均匀程度,影响进气均匀分布程度的排序为L>θ>n>ΔH>ΔL。     

隔离式减振垫浮置板道床施工工艺的探讨

介绍隔离式减振垫浮置板道床施工工艺、基本原理、施工特点、施工设备和作业人员配备。针对浮置板道床高度及构成、轨道基础施工、隔振垫铺设施工、轨排铺设施工、隔离式减振垫道床钢筋及混凝土施工、伸缩缝的设置、密封条及防水层施工进行分析和论述,提出安全质量控制措施。     

应用高频气力分选机分选电子废料碎片的研究

进行了实验室高频气力分选机分选3～0.3 mm印刷电(线)路板模拟物料的研究.结果表明,在振频为1 621次/min,上升风量为120 m3/h,95 m3/h,60 m3/h,床面横向倾角6.64°,纵向倾角为1.07°时,金属回收率达93.95%;重产物金属品位为89.19%;轻产物中非金属的品位达99.33%.0.5～0.3 mm细粒物料的分选效果也是令人满意的.     

装修用板材的导热性能分析

导热系数是物体的重要物理指标,对四种板材的导热系数进行了测试,并对导热性能进行了分析。     

兔子宫内膜蛋白等电聚焦电泳柱状胶与板状胶电泳效果的比较

哺乳动物早期胚胎发育过程中，胚泡附植的成功与否对早期胚胎的发育十分重要．为了有效地弄清胚泡附植的分子机制，本研究从分析蛋白质的一种生化技术-等电聚焦电泳着手，利用兔子宫内膜蛋白作为实验材料，探讨了柱状胶与板状胶等电聚焦电泳分离蛋白质的电泳效果．研究结果表明：在相同情况下，柱状胶与板状胶的蛋白质分布有一些差别，pH梯度分布也不一致；板状胶比柱状胶pH值分布宽、蛋白质谱带多、分辨率高；板状胶酸性端只有1—2cm没有蛋白带、蛋白带分布比较均匀且压得比较紧．这说明在用子宫内膜作为实验材料进行电泳时用板状胶进行电泳的结果较好．     

废弃印制线路板中的环氧树脂回收处置技术

对废印制线路板中的环氧树脂的成分及性质进行了分析，并对几种环氧树脂回收的处置方法进行了介绍和比较，提出了环氧树脂回收处置技术选择的建议。