玻璃注射器对顶空气相色谱法分析苯系物的误差原因分析

按GB11890—89顶空气相色谱法分析苯系物时，发现重复性和分割水平样品平行性较差，经仔细分析，是由于使用普通玻璃注射器造成的。为避免此类误差，建议顶空气相色谱法分析时，使用带特氟龙顶端推杆的气密性注射器。     

平板玻璃行业环境影响评价中工程分析要点浅析

在对平板玻璃行业环境影响评价中的工程组成、一般特征和环境影响特征进行全面分析的基础上,详细分析了建设项目的工艺过程、物料平衡、水平衡及硫平衡等,计算污染物的产生量,制订相应的防治措施,并从行业准入条件及清洁生产角度分析了项目建设的可行性,为环境影响预测和评价提供所需基础数据,为项目的环境管理提供建议指标和科学数据。     

废弃液晶屏玻璃基板的行星式球磨工艺研究

以废弃液晶屏玻璃基板为原料,研究了球磨方式和球磨时间在球磨过程中对粉料粒径分布的影响。通过对废弃液晶屏玻璃基板的行星式球磨工艺的研究,探讨了球磨方式、球磨时间等因素对球磨效果的影响,以建立玻璃粉体细化的合理球磨方式和工艺参数。     

An investigation of double-glass-covered trapezoidal salt-gradient solar pond coupled with reflector

In the present study, a trapezoidal salt-gradient solar pond (TSGSP) has been investigated experimentally. The top surface of solar pond has been covered with double-glass cover in order to reduce the evaporative and convective losses from the top. This results in increase of temperature even in the top zone of the solar pond and leads to more volume utilization for heat storage in the pond. A reflector made of aluminium sheet has been used to enhance the solar intensity on the solar pond during sunny hours. A procedure, to determine optimum tilt angle of reflector in order to utilize maximum amount of solar energy at noon, has been proposed. The use of reflector enhanced the average solar intensity on the top surface of solar pond by 22%. The maximum average temperature of trapezoidal solar pond with glass cover and reflector has been observed to be 70.5°C. The thermal efficiencies of LCZ, NCZ and UCZ for the trapezoidal solar pond with double-glass cover and reflector have been estimated to be 32.73%, 23.22% and 5.30%, respectively. In addition to experimental investigation, the sunny area ratio of TSGSP has been theoretically computed and compared with the cuboid solar pond having same top surface area and depth in order to see the effect of pond shape on sunny area ratio. The average yearly sunny area ratio of trapezoidal solar pond has been determined to be 11% higher than that of cuboid one.     

Metal levels in computer monitor components discarded in the vicinities of electronic workshops

Levels of Pb, Ni, Cr, Cu, Zn, and Cd in the glass screens (GS) and printed wiring boards (PWBs) of obsolete computer monitors (OCMs) were determined by flame atomic absorption spectrophotometry (FAAS) following standard digestion. Metal concentrations (mg kg^?1) in GS were in the following ranges (medians in brackets): Pb ND – 3100 (46), Cd 0.5–2.6 (0.8), Cr ND – 18.7 (3.1), and Zn 8.1–600 (37) and in PWBs (mg kg^?1): Pb 34,600 ± 17,000, Cd 11 ± 9, Cr 59 ± 45, Zn 15,900 ± 7800, Cu79,000 ± 22,600, and Ni 3200 ± 2500. In GS, the levels of the six metals were lower than their total threshold limit concentrations (TTLC), except for Pb with a TTLC of 1000 mg kg^?1 in 10% of the samples. In the PWBs, the TTLC of Pb and Cu (2500 mg kg^?1) was exceeded many fold. For Zn (5000 mg kg^?1) and Ni (2000 mg kg^?1); they were exceeded by 90% and 65%, respectively. For OCMs manufactured in 2001 and later, Pb and Zn levels in GS and Cr, Zn, and Ni in PWBs were significantly reduced.     

Asian Americans and workplace discrimination: The interplay between sex of evaluators and the perception of social skills

In two role‐playing scenarios, we investigate how White male and female evaluators perceive an Asian American versus White job candidate on the dimensions of competence and social skills and how these perceptions affect evaluators' decisions in hiring and promotion. Specifically, Study 1 examines how the perceptions of competence and social skills affect Asian (versus White) college graduates' chance of obtaining a non‐technical (versus technical) position, and Study 2 tests how these perceptions affect Asians' probability of promotion relative to Whites'. Our findings suggest that female evaluators were less likely to select Asian than White candidates into positions involving social skills and were less likely to promote Asian than White candidates into these types of positions. Furthermore, female evaluators' perception that Asians were less socially skilled than Whites mediated both of these decisions. This paper contributes to the understanding of workplace discrimination of Asian Americans. Copyright © 2012 John Wiley & Sons, Ltd.     

玻璃熔窑SCR烟气脱硝设计的影响因素分析

对影响玻璃熔窑SCR烟气脱硝设计的几个主要因素,如烟气条件（烟气量和NOx初始浓度）、还原剂、催化剂、SCR反应器布置方式及催化剂吹灰方式等进行了分析与讨论,指出在对玻璃熔窑进行SCR烟气脱硝设计时应根据燃料情况、烟气条件、生产工艺、环保法规及污染物减排要求等合理进行选择,以确保玻璃熔窑SCR烟气脱硝系统安全运行及工程投资、运行费用的经济合理性。     

废旧阴极射线管(CRT)显示器玻壳中铅浸出特性研究

CRT显示器玻壳中含有大量的铅,废旧CRT显示器玻壳被列为危险废物。采用4种浸提方法(水平振荡法(GB5086.2-1997)、翻转法(GB5086.1-1997)、硫酸硝酸法(HJ/T299-2007)、醋酸缓冲溶液法(HJ/T300-2007))研究CRT显示器玻壳中铅的浸出特性。同时探讨浸提液pH和pH缓冲能力、振荡方式、CRT玻壳颗粒粒径、液固比、浸提时间对CRT玻壳颗粒中的Pb浸出的影响。结果表明:上述4种方法浸提液中Pb的平均浓度分别为0.07、0.69、1.64、11.33 mg/L。随着醋酸缓冲液初始pH值从4.0升高到7.0,其浸提的Pb的含量呈现出逐渐下降的趋势。而去离子水的pH值低于5时,其浸提的Pb的含量才明显升高。Visual MINTEQ模型计算结果表明:在去离子水和硫酸硝酸混合液浸提过程中,主要以酸碱反应为主;而在醋酸缓冲液浸提过程中,以酸碱反应和络合反应为主。前3种浸提方法使用的浸提液类似于天然水环境或降水,其浸提的Pb浓度高于地下水环境质量III标准。第4种浸提方法模拟垃圾填埋场环境,其浸提的Pb的浓度高于工业固废最高容许浸出浓度。因此,废旧CRT玻壳无论填埋处置或直接进入土...     

Responses of community to the possible use of recycled water for washing machines: A case study in Sydney, Australia

Recycled water is a valuable resource that has potential to free up potable water supplies and recharge systems while improving the environment. Recycled water for washing machine could be one of the options as new end use of recycled water to alleviate the demand on existing and limited water supplies. This paper summarizes the findings of a research survey in Sydney, Australia to explore the attitudes and opinions of community towards the use of recycled water for different purposes, especially for the washing machine. The survey showed that 97% of the respondents were aware of the persisting water shortage problem while more than 60% of the respondents supported the use of recycled water for washing clothes. This paper exposes the basic concern of participants for using recycled water in washing machine. Health issue was found as the most concerns of the community. The survey also presents the further conditions to be considered for using recycled water for washing machine according to the participants’ opinions. Correlation between knowledge and attitudes of respondents was also found in this survey.     

Balancing durability and environmental impact in concrete combining low-grade recycled aggregates and mineral admixtures

This paper investigated the effect of various amounts of low-grade recycled aggregates in concrete containing mineral admixtures at three different water-binder ratios on mechanical and environmental performance. The balance between durability and environmental impact for a given strength level similar to normal-use concrete was also examined using analytic hierarchy process. Results showed that increasing the water-binder ratio and volume of recycled aggregates reduced compressive strength and increased air permeability and drying shrinkage relative to normal aggregates. However, compared to normal-use concrete similar or better performance could be achieved, which was attributed to improvement of low-grade recycled aggregate performance when combined with fly ash. Similarly, CO₂ emissions and volume of raw materials were lower than the normal-use concrete for all mixes. Concrete mixes with low air permeability and low CO₂ footprint had the best balance of durability and environmental impact, as decreasing raw material volume tended to more greatly reduce durability.