基于活性污泥微生物冻后再生对废水基质降解效能的研究

采用高径比为12.5的序批式反应器(SBR)对冷冻的成熟好氧颗粒污泥（AGS）解冻驯化,研究母体颗粒冻后富集培养及其在番茄废水基质降解中的循环利用。结果表明：冻后恢复活性的污泥第60天全部颗粒化,平均粒径不小于0.45 mm;高通量测序结果显示,相较母体颗粒,该污泥中与颗粒化相关的变形菌门(Proteobacteria)和拟杆菌门(Bacteroidetes)优势菌群富集,微生物丰度呈显著差异（P<0.05）;复合菌株对COD、NH3-N和PO3-4-P去除率分别为98.9%、82.1%和82.2%,可实现番茄废水的有效降解。     

乌海市夏季臭氧污染特征及基于过程分析的成因探究

乌海市地形复杂,周边工业园区分布密集,近年来夏季O₃污染问题突出,且污染特征与形成机制尚不明确,分析乌海市O₃变化特征,探究O₃污染形成机制对该区域大气污染防治具有重要意义.本文在分析乌海市2018年6~8月3次持续O₃污染过程特征的基础上,利用WRF-CMAQ模式系统进行模拟并根据过程分析输出结果对污染的成因进行了深入分析,探讨了区域输送和局地光化学反应对乌海市O₃的影响.结果表明,乌海市夏季O₃呈现"单峰"的日变化特征,近地面O₃与向下短波辐射和气温显著呈正相关,与相对湿度呈负相关;空间分布上,乌海市3个工业园区白天和夜间均为O₃低值区,乌海西南部宁夏石嘴山地区、乌海城区和西北部乌兰布和沙漠地区白天为O₃高值区;过程分析结果表明,输送和化学过程及其相对大小对乌海市O₃有决定性影响,6月和7月的污染过程中局地光化学反应和输送共同导致O₃显著升高,且化学过程的影响是输送的两倍左右,8月O₃的升高主要为输送作用的贡献;进一步对输送作用进行分解可知偏南和西北方向的输送对O₃的升高有较大贡献,结合前体物的排放,可能的传输来源为宁夏银川、石嘴山及巴彦淖尔等区域,因此,乌海市应在控制本地排放的基础上,加强区域联防联控,减少区域传输对O₃的影响.     

The representation of cyanobacteria life cycle processes in aquatic ecosystem models

Two simplified versions of a numerical life cycle model for diazotrophic cyanobacteria (of the order Nostocales) are developed and evaluated. Both consider two-life cycle stages, one growing, nitrogen-fixing stage and one stage that combines the resting, germinating and vegetative stages. The versions differ in the vertical resolution of the non-diazotrophic stage: version 1 collects the biomass in one layer at the bottom, version 2 considers sinking and rising of biomass explicitly. The results of the two versions are compared with a complex cyanobacteria life cycle model which describes four different life cycle stages each with two internal quotas for energy and nitrogen. The two simplified approaches show a good agreement with respect to the main characteristics of cyanobacteria dynamics (timing and duration of blooms, magnitude of nitrogen fixation, interannual variability). Our model study shows that both simplified approaches are suitable to be implemented into three-dimensional coastal or lake models.     

Evaluation of recycling efforts of aircraft companies in Wichita

The number of manufactured aircraft has been continuously increasing worldwide because of the high demand for airline transportation. During manufacturing, many advanced materials and devices are used to build various sizes and shapes of aircraft. However, most of these materials and devices require considerable energy and labor to produce, so reusing these at any life stage of the aircraft offers many economic and environmental benefits, and is considered lucrative and environmentally responsible. Several recyclable materials—composites, metals and alloys, wires, wood, paper, plastics, electronics, and avionics—emerge as waste streams during the manufacturing of aircraft. Many aircraft companies have been recycling these materials to remanufacture aircraft parts or other products for more sustainable production. In the present study, we evaluated the recycling efforts of local aircraft companies in Wichita, KS. These efforts were considered in terms of recycling efficiency/rate and environmental benefits. These included cradle-to-gate (CTG) life-cycle inventory analysis of the materials, carbon dioxide emissions, virgin material replacement with recycled materials, and natural resources usage. Our findings show that there exists a significant potential for contributions to sustainability as well as environmental and health benefits in the region from recycling by aircraft manufacturing plants.     

Personality, individual differences, and demographic antecedents of self-reported household waste management behaviours

The present study sought to extend recent conceptual frameworks of waste management behaviours by examining personality, individual differences, and socio-demographic antecedents of self-reported waste recycling, reuse, and reduction behaviours. A total of 203 participants from a British community sample completed a questionnaire consisting of measures of their self-reported waste management behaviour, Machiavellianism, political cynicism, the Big Five personality traits, and socio-demographics. The results of structural equation modelling showed that individuals who were less Machiavellian, less politically cynical, older, and more conscientious were more likely to report positive waste management behaviours. In combination, these predictors explained 22.0% of the variance in waste management behaviours. Thus, these variables may improve the predictive validity of existing conceptual models of waste management behaviours. The results are discussed in relation to those models.     

General vs. domain specific recycling behaviour—Applying a multilevel comprehensive action determination model to recycling in Norwegian student homes

This paper reports the results of a multilevel structure equation model predicting general and fraction specific self-reported recycling behaviour. The model was tested on a sample of 697 undergraduate students from four Norwegian universities who each reported their degree of participation in the local recycling schemes for paper/cardboard, glass, metal, and plastic. It was demonstrated that variance in recycling behaviour can be divided into a smaller general part that is relatively stable across waste fractions and a specific part that depends on the respective fraction. General recycling behaviour is well predicted by intentions to recycle and recycling habits, whereas perceived behavioural control is to a large extend fraction specific and influences the fraction specific recycling. Perceived behavioural control mediates the influence of the recycling scheme type, distance to recycling containers, and transport mode used to reach the recycling containers.     

A quantitative estimate of potential aluminium recovery from incineration bottom ashes

The recovery of ferrous and non ferrous metals from the bottom ashes is a common practice in the most part of Europe, both for the environmental advantages of their recycle and to avoid problems of swelling and expansion that metals can cause when bottom ashes are reused in concrete production or in road construction. This paper focuses on metal recovery from bottom ashes produced in Municipal Solid Waste (MSW) incinerators, with a particular focus on aluminium. A forecasting model was developed in order to evaluate the quantity of aluminium scraps recoverable from the bottom ashes. The model was applied to the Italian situation but its validity can be extended to other countries. Focusing on Italy, by applying conventional technologies for the separation of non-ferrous metals, the amount of aluminium potentially recoverable from bottom ashes is estimated in the range from 16,500 to 21,000 tonnes at the year 2015, and from 19,000 to 28,500 tonnes at 2020.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors

In the US, household electronic waste collected for recycling is primarily by voluntary drop-off at designated collection facilities. This study examines the influence of specific collection facility attributes (recycling fees charged, number of days open, and driving distance) on the household collection rate of e-waste in the US state of Maine. Data were collected for household computer monitor and television collection for 92 municipal waste transfer facilities representing 30% of the state's population for one year. Results suggest that recycling fees are negatively correlated with the number of televisions and computer monitors collected; furthermore, the more frequently facilities were open, the more televisions and computer monitors were collected per capita. The distance from the facility had no correlation, which prompted an analysis of whether the existence of a curbside collection system in the municipality was influential. Results show a negative correlation between computer monitor and television collection and a municipality having recycling (but not e-waste) curbside collection. Based on the results of this study, policymakers may be able to increase the collection rate of household e-waste by eliminating or lowering recycling fees, expanding collection days and hours to increase convenience, and/or considering curbside collection of e-waste.     

A mechanical pre-treatment process for the valorization of useful fractions from spent batteries

In this paper the authors propose a full-scale plant aimed to pre-treat spent batteries in order to obtain cleaned useful fractions (magnetic and non-magnetic metals, paper, plastic, a fine-sized material made of a metal-carbon mixture). The treating process was designed after having analyzed and tested a representative sample coming from the whole amount of spent batteries collected in 1 month by the public service in and around Turin. The analyses performed on the sample allowed the authors to determine its in-percentage composition in term of type of batteries: 60-70% b.w. (by weight) alkaline, 25-30% b.w. Zn-C and 5-10% b.w. other types. For each type, the composition in term of size (AAA or LR03; AA or LR6; C or LR14; D or LR20; 9 V or 6F22A; 4.5 V or 3R12A) has also been determined.The treatment for the recovery of secondary raw materials foresees the following phases:

-

separation of useful types/sizes of exhaust batteries to undergo further treatments by means of a first sieving process;

-

liberation of the single components taking advantage of a crushing operation;

-

separation of a fine-sized material (to subject to pyro or hydro metallurgic recovery) from a coarse-sized material (to send to secondary smelt foundries and incinerators) by means of a second sieving phase.

On the basis of the results obtained from the crushing/sieving laboratory tests and the chemical characterization, a full-scale plant able to treat about 76,000 t/y of spent batteries has been designed. The cost analysis performed on the proposed treatment plant has given back a unit pre-treatment cost equal to 3€ per ton of processed spent batteries.