Let's get this meeting started: Meeting lateness and actual meeting outcomes

Meeting lateness is pervasive and potentially highly consequential for individuals, groups, and organizations. In Study 1, we first examined base rates of lateness to meetings in an employee sample and found that meeting lateness is negatively related to both meeting satisfaction and effectiveness. We then conducted 2 lab studies to better understand the nature of this negative relationship between meeting lateness and meeting outcomes. In Study 2, we manipulated meeting lateness using a confederate and showed that participants' anticipated meeting satisfaction and effectiveness were significantly lower when meetings started late. In Study 3, participants holding actual group meetings were randomly and blindly assigned to either a 10 min late, 5 min late, or a control condition (n = 16 groups in each condition). We found significant differences concerning participants' perceived meeting satisfaction and meeting effectiveness, as well as objective group performance outcomes (number, quality, and feasibility of ideas produced in the meeting). We also identified differences in negative socioemotional group interaction behaviors depending on meeting lateness. In concert, our findings establish meeting lateness as an important organizational phenomenon and provide important conceptual and empirical implications for meeting research and practice.     

Critical success factors of sustainable manufacturing practices in Malaysian automotive industry

The purpose of this study is to examine the critical success factors of sustainable manufacturing practices (SMPs) in Malaysian automotive industry. The questionnaires were designed and distributed to the 50 respondents. The pilot study sample consists of 26 respondents from 50 questionnaires, with an average response rate of 52%. The results of reliability analysis show that social responsibility is critical factor influencing the direct SMPs implementation success. By implementing SMPs in Malaysian automotive industry, it can assist company to improve the quality of management. Thus, this study recommends that the future research explore the influence of SMPs on sustainable performance in Malaysian automotive industry.     

Region-gridding recycling of bulk organic waste: Emerging views based on coordinated urban and rural development

Bulk organic waste (BOW) has a large output in China. The improper disposal of BOW will not only bring serious environmental pollution, but also cause waste of biomass resources. The viewpoint proposes a region-gridding recycling management system of BOW that highlights the coordinated development of environmental, agricultural and energy elements in urban and rural areas. The viewpoint aims to drive the upstream and downstream industrial chains of BOW treatments, avoid the repeated construction of resource facilities, guide the upgrading of resource-based technologies, promote the professionalization of farmers, and thus built the high-quality modern agricultural recycling industrial park based on system management.     

Toward separation at source: Evolution of Municipal Solid Waste management in China

Municipal Solid Waste (MSW) management in China has been transitioning from a mixed collection and treatment system to a separated collection and treatment system. The continuous rise of MSW treatment capacity and the optimization of technology structure provided basic facility support for China to promote MSW separation at source. China preferred a four-type separation system. Regulated recycling should be enhanced to improve the efficiency and sustainability of recycling industry. As food waste is the main composition of MSW in China, 20%–30% of the food waste diversion and land application could maximize the comprehensive environmental performance. Incineration is to be the pillar technology in MSW separated treatment system in China.     

废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录(第一批)》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池(铅酸电池、镍氢电池及锂电池)的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

Toward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant

Sapporo Plastics Recycling Co., Ltd., (SPR) started its commercial operation of waste plastics liquefaction in 2000. At first only hydrocarbon oil was reclaimed, this being derived from the waste plastics liquefaction process under the Japanese Containers and Packaging Recycling Law. Presently, thermal degradation residue and hydrochloric acid are being produced as by-products in addition to the hydrocarbon oil. As a result, the SPR plastics liquefaction plant has achieved a high reclamation rate of 96%, and 93% of the recycled products have been reused in Hokkaido, where SPR is located. The technical problems caused by corrosion and clogging have been solved. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Recycling extruded polystyrene by dissolution with suitable solvents

The amount of extruded polystyrene (XPS) waste has increased in recent years due to the increase of its use in the thermal insulation of buildings, transport vehicles, and refrigerators, among others. Dissolution with suitable solvents to achieve a volume reduction of more than 100 times without degradation of polymer chains is one of the cheapest and most efficient methods of recycling XPS. Several environmentally friendly solvents have been tested as dissolution agents for XPS volume reduction; the action of these solvents does not produce any degradation of polymer chains. The solubility of the polymer in such solvents at different temperatures was investigated. The solvent can be easily recycled by distillation, obtaining a high-quality recycled polymer. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

旋转填充床中Fenton＋O3氧化降解模拟阿莫西林废水

以旋转填充床（RPB）作为反应装置,研究了Fenton工艺与Fenton＋O3工艺处理模拟阿莫西林废水的效果,考察了FeSO4·7H2O的投加量、温度、旋转床转速、液体流量及pH对C0D去除率的影响。实验表明,Fenton＋O3工艺的COD脱除率及BOD5／COD相对于Fenton工艺分别提升26．7％和140％。该工艺在pH为3、温度为25℃、液体流量30L／h、气体流量2．5L／h、转速800r／min、H2O2的投加量为1mmol／L及Fe2＋投加量为0．4mm01／L的条件下,100mg／L的模拟阿莫西林废水中COD的去除率达到57．9％,BOD5/COD从0增加到0．36,满足后续生化处理要求。     

Degradation of atrazine using solar driven fenton-like advanced oxidation processes

Atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) was degraded using cobalt-peroximonosulfate (Co/PMS) advanced oxidation process (AOP). Three Co concentrations (0.00, 0.25 and 0.50 mM) and five peroximonosulfate (PMS) concentrations (0, 5, 8, 16 and 32 mM) were tested. Maximum degradation reached was 88% using dark Co/PMS in 126 minutes when 0.25 mM of cobalt and 32 mM of PMS were used. Complete atrazine degradation was achieved when the samples were irradiated by the sun under the same experimental conditions described. Tests for identification of intermediate products allowed identification and quantification of deethylatrazine in both dark and radiated conditions. Kinetic data for both processes was calculated fitting a pseudo-first order reaction rate approach to the experimental data. Having kinetic parameters enabled comparison between both conditions. It was found that the kinetic approach describes data behavior appropriately (R² ≥ 0.95). Pseudo-kinetic constants determined for both Co/PMS processes, show k value of 10^?4 for Co/PMS and a k value of 10^?3 for Co/PMS/ultraviolet (UV). This means, that, with the same Co/PMS concentrations, UV light increases the reaction rate by around one order of magnitude than performing the reaction under dark conditions.