The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards

The effects of employing activated Al₂O₃ during the catalytic pyrolysis of waste printed circuit boards (WPCBs) are investigated, focusing on the recycling of light oil. Variations in the pyrolysis process are studied through analysis of the phase distribution, water content and boiling point fractions of the resulting products. Product composition and carbon number distribution are analyzed using gas chromatography techniques. The use of activated Al₂O₃ increases the light oil fraction and also reduces the quantity of brominated products formed. It was determined that the best yield of light oil and most efficient debromination resulted from catalytic pyrolysis at 600 °C. Applying catalyst-to-feed ratios in the range of 1.0–1.5 also maximizes the yield of light oil. The major oil fraction resulting from catalytic pyrolysis has a boiling point range of 0–250 °C and carbon number range of C6–C9, showing for use as a potential fuel after suitable treatment such as hydrogenation. At a higher catalyst-to-feed ratio of 2.0, activated Al₂O₃ generates a high proportion of light oil fractions containing a significant quantity of chemicals such as phenol (52.67% at 600 °C), although an overall lower yield of oil is obtained. The oil produced in this manner may also be used as a raw material feedstock for the production of various other useful chemicals.     

The Aging of America's Reservoirs: In‐Reservoir and Downstream Physical Changes and Habitat Implications

Reservoirs are important for various purposes including flood control, water supply, power generation, and recreation. The aging of America's reservoirs and progressive loss of water storage capacity resulting from ongoing sedimentation, coupled with increasing societal needs, will cause the social, economic, environmental, and political importance of reservoirs to continually increase. The short‐ and medium‐term (<50 years) environmental consequences of reservoir construction and operation are well known and include an altered flow regime, lost connectivity (longitudinal, floodplain), an altered sediment regime, substrate compositional change, and downstream channel degradation. In general, reservoir‐related changes have had adverse consequences for the natural ecosystem. Longer term (>50 years) environmental changes as reservoirs enter “old” age are less understood. Additional research is needed to help guide the future management of aging reservoir systems and support the difficult decisions that will have to be made. Important research directions include assessment of climate change effects on aging and determination of ecosystem response to ongoing aging and various management actions that may be taken with the intent of minimizing or reversing the physical effects of aging.     

长江源区基于坡面尺度的土壤水热过程模拟研究

长江源多年冻土区土壤水热传输过程机理与模拟,是广泛关系到高原生态环境保护恢复和区域水文过程的关键科学问题。因此,以GEOtop模型为研究平台,以长江源不同植被盖度下（裸地、30%、65%和92%）高寒草甸的观测数据为基础,检验模型对土壤水热迁移过程的描述与模拟精度。总体而言,GEOtop模型需要率定的参数较少,从而减少模型模拟的不确定性,提高了模拟精度。对不同植被盖度下土壤温度、水分和实际蒸散发模拟的NSE 系数基本达到08,表明模型能准确模拟高寒生态系统土壤的水热传输过程,可以作为长江源区土壤水热过程的有效模拟工具     

水环境中的碘化X-射线造影剂及其去除工艺研究进展

碘化X-射线造影剂(Iodinated X-ray contrast media,ICM)在水环境中被广泛检出,因其近期被发现是碘化消毒副产物的前体物而受到越来越多的关注.本文总结了ICM在污水、地表水和饮用水等水环境中的污染现状;分析了ICM的转化产物及转化机制;重点介绍了ICM的去除工艺,包括高级氧化技术、辐射技术以及生物降解转化技术;讨论了ICM及其降解转化产物可能对环境造成的生态风险.最后,本文对未来ICM的研究前景进行了展望.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

The role of perceived effectiveness of policy measures in predicting recycling behaviour in Hong Kong

Hong Kong is a compact and ‘land-hungry’ city where recycling has become an important measure for treating waste and reducing the demand on the limited landfills. The objectives of this paper are to extend the model of recycling attitude and behaviour to explain the relationship between perceived policy effectiveness and recycling behaviour. Previous studies on recycling attitude and behaviour had widely adopted the theory of planned behaviour (TPB) and the norm activation model (NAM), and drawn policy implications from them. Nevertheless, little research has been conducted to investigate the role of perceived effectiveness of policy measures in predicting recycling behaviour. To address this, a model that integrates the TPB and NAM was proposed in this study, and a street survey was conducted to investigate the case. The results illustrate that recycling intention is influenced by subjective norms, perceived behavioural control, moral norms, and awareness of consequences, as well as a newly proposed construct, namely perceived policy effectiveness. The study proved self-reported recycling behaviour (direct behaviour) and support for policy measures (indirect behaviour) are influenced by recycling intention. All in all the Government should provide more recycling bins, guidelines on recycling activities, and should accent what it has been doing to facilitate and encourage recycling.     

Does Riparian Forest Restoration Thinning Enhance Biodiversity? The Ecological Importance of Large Wood

Intact riparian ecosystems are rich in biological diversity, but throughout the world, many have been degraded. Biodiversity declines, particularly of vertebrates, have led to experimental efforts to restore riparian forests by thinning young stands to accelerate creation of large diameter live trees. However, many vertebrates depend on large diameter deadwood that is standing as snags or fallen to the forest floor or fallen into streams. Therefore, we reviewed the sizes of deadwood and live trees used by different vertebrate species to understand which species are likely to benefit from different thinning treatments. We then examined how riparian thinning affects the long‐term development of both large diameter live trees and deadwood. To this end, we used a forest growth model to examine how different forest thinning intensities might affect the long‐term production and abundance of live trees and deadwood. Our results suggest that there are long‐term habitat tradeoffs associated with different thinning intensities. Species that utilize large diameter live trees will benefit most from heavy thinning, whereas species that utilize large diameter deadwood will benefit most from light or no thinning. Because far more vertebrate species utilize large deadwood rather than large live trees, allowing riparian forests to naturally develop may result in the most rapid and sustained development of structural features important to most terrestrial and aquatic vertebrates.     

Closing the water cycle for industrial laundries: An operational performance and techno-economic evaluation of a full-scale membrane bioreactor system

To reduce the consumption of freshwater in the laundry industry, a new trend of closing the water cycle has resulted in the reuse/recycling of water. In this study, the performance of a full-scale submerged aerobic membrane bioreactor (9 m³) used to treat/reuse industrial laundry wastewater was examined over a period of 288 days. The turbidity and total solids (TS) were reduced by 99%, and the chemical oxygen demand (COD) effluent removal efficiencies were between 70% and 99%. The levels of COD removed by the membrane were significantly greater than the levels of biodegraded COD. This enabled the bioreactor to sustain COD levels that were below 100 mg/L, even during periods of low wastewater biodegradation due to bioreactor sludge. An economic evaluation of the membrane bioreactor (MBR) system showed a savings of 1.13 € per 1 m³ of water. The payback period for this system is approximately 6 years. The energy and maintenance costs represent only 5% of the total cost of the MBR system.     

Oxidative removal of acetaminophen using zero valent aluminum-acid system: Efficacy, influencing factors, and reaction mechanism

Commercial available zero valent aluminum under air-equilibrated acidic conditions (ZVAl/H⁺/air system) demonstrated an excellent capacity to remove aqueous organic compounds. Acetaminophen (ACTM), the active ingredient of the over-the-counter drug Tylenol^®, is widely present in the aquatic environment and therefore the treatment of ACTM-contaminated water calls for further research. Herein we investigated the oxidative removal of ACTM by ZVAl/H⁺/air system and the reaction mechanism. In acidic solutions (pH < 3.5), ZVAl displayed an excellent capacity to remove ACTM. More than 99% of ACTM was eliminated within 16 hr in pH 1.5 reaction solutions initially containing 2.0 g/L aluminum and 2.0 mg/L ACTM at 25 ± 1\textcelsius. Higher temperature and lower pH facilitated ACTM removal. The addition of different iron species Fe⁰, Fe²⁺ and Fe³⁺ into ZVAl/H⁺/air system dramatically accelerated the reaction likely due to the enhancing transformation of H₂O₂ to HO. via Fenton's reaction. Furthermore, the primary intermediate hydroquinone and the anions formate, acetate and nitrate, were identified and a possible reaction scheme was proposed. This work suggested that ZVAl/H⁺/air system may be potentially employed to treat ACTM-contaminated water.