Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

水泥厂煤粉制备系统袋除尘器的选型及应用

本文介绍了煤粉制备系统含尘废气的特性及治理技术的发展与应用,并从袋除尘器类型的确定、处理风量的确定、过滤风速的选取、过滤面积的计算和除尘器规格的选取等方面介绍了煤磨袋除尘器的选型,以及FGM（M）型气箱脉冲防爆袋除尘器、MMC型脉冲喷吹防爆袋除尘器和LPMC型低阻高效防爆袋除尘器在煤粉制备系统除尘中的应用推广情况。     

环保新思维：绿色保险

我国现在正处于环境事故高发期,而环境污染损害赔偿是企业,甚至是国家必须面对的现实问题。然而单凭企业承担责任是力所不能及的,最终不得不由国家买单,给国家带来沉重的负担。这种情况迫切需要建立环境污染损害责任保险机制,即绿色保险,把赔偿引向社会化。保险本身就是一种救灾形式,因为它能分散风险,减少损失。针对我国的具体情况,建立适宜的环境污染责任保险模式才能平衡发展与环境保护的关系、在全社会牢固树立生态文明理念。     

Field Evaluation of DRAINMOD 5.1 Under a Cold Climate: Simulation of Daily Midspan Water Table Depths and Drain Outflows1

Abstract: The hydrologic performance of DRAINMOD 5.1 was assessed for the southern Quebec region considering freezing/thawing conditions. A tile drained agricultural field in the Pike River watershed was instrumented to measure tile drainage volumes. The model was calibrated using water table depth and subsurface flow data over a two‐year period, while another two‐year dataset served to validate the model. DRAINMOD 5.1 accurately simulated the timing and magnitude of subsurface drainage events. The model also simulated the pattern of water table fluctuations with a good degree of accuracy. The R² between the observed and simulated daily WTD for calibration was >0.78, and that for validation was 0.93. The corresponding coefficients of efficiency (E) were >0.74 and 0.31. The R² and E values for calibration/validation of subsurface flow were 0.73/0.48 and 0.72/0.40, respectively. DRAINMOD simulated monthly subsurface flow quite accurately (E > 0.82 and R² > 0.84). The model precisely simulated daily/monthly drain flow over the entire year, including the winter months. Thus DRAINMOD 5.1 performed well in simulating the hydrology of a cold region.     

Evaluation of a Watershed Model for Estimating Daily Flow Using Limited Flow Measurements1

Abstract: The Soil and Water Assessment Tool (SWAT) model was evaluated for estimation of continuous daily flow based on limited flow measurements in the Upper Oyster Creek (UOC) watershed. SWAT was calibrated against limited measured flow data and then validated. The Nash‐Sutcliffe model Efficiency (NSE) and mean relative error values of daily flow estimations were 0.66 and 15% for calibration, and 0.56 and 4% for validation, respectively. Also, further evaluation of the model’s estimation of flow at multiple locations was conducted with parametric paired t‐test and nonparametric sign test at a 95% confidence level. Among the five main stem stations, four stations were statistically shown to have good agreement between predicted and measured flows. SWAT underestimated the flow of the fifth main stem station possibly because of the existence of complex flood control measures near to the station. SWAT estimated the daily flow at one tributary station well, but with relatively large errors for the other two tributaries. The spatial pattern of predicted flows matched the measured ones well. Overall, it was concluded from the graphical comparisons and statistical analyses of the model results that SWAT was capable of reproducing continuous daily flows based on limited flow data as is the case in the UOC watershed.     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

NaCl和KCl对厌氧污泥抑制的动力学研究

在厌氧颗粒污泥和厌氧絮状污泥系统中,进行盐质量浓度(NaCl或KCl质量浓度,下同)对厌氧污泥抑制动力学的研究,得到不同拟合的COD降解动力学方程及参数.实验结果表明:当盐质量浓度为10～30 g/L时,KCl对厌氧污泥的COD比降解速率的抑制程度大于NaCl;当盐质量浓度由0 g/L增至10 g/L时,半速率常数逐渐增加;当盐质量浓度由10 g/L增至30 g/L时,半速率常数逐渐减小;在厌氧污泥系统中,NaCl抑制作用下的盐抑制常数高于KCl,且颗粒污泥的盐抑制常数高于絮状污泥.     

Integrated model of simulated occupant injury risk and real medical costs

Introduction

The purpose of this study was to develop an integrated methodology that links occupant injury risk functions, estimated in the laboratory, with real world medical treatment costs by using the abbreviated injury score (AIS). Using our model, the expected medical treatment costs for crash injuries to various body regions and of different severities can be investigated.

Methods

First, the simulation results are compared with NHTSA crash data. We used a modified kinematics simulation model that incorporates an F = E^b function as a supplement to the previous Steffan's model to obtain a more accurate acceleration history a(t). Second, head injury criteria HIC₃₆ can be calculated from a(t), and we use the injury probability P as a function of HIC_36, as proposed by Kuppa, to obtain the injury risk function for various AIS values. Third, medical treatment cost models for various AIS values can be calculated by using a regression cost model with real world data. Finally, the injury risk function and medical treatment cost models are linked through AIS values. We establish an integrated methodology and predict medical costs and car safety data using real world police reports, medical treatment costs, and laboratory simulation results.

Results

Using head injuries in frontal crashes as an example, we focus on simulation parameters for different vehicle models, with and without airbags. We specifically examine impact closing speed, Delta-V, and impact directions.

Conclusion

Simulation results can be used to supplement insufficient real crash data, in particular ΔV, and injury risk results from police crash reports.

Impact on industry

The proposed integrated methodology may provide the vehicle industry with a new safety assessment method. Real crash data coupling provides consumers with more realistic and applicable information.     

Modeling perceived collision risk in port water navigation

An increase in the likelihood of navigational collisions in port waters has put focus on the collision avoidance process in port traffic safety. The most widely used on-board collision-avoidance system is the automatic radar plotting aid which is a passive warning system that triggers an alert based on the pilot’s pre-defined indicators of distance and time proximities at the closest point of approaches in encounters with nearby vessels. To better help pilot in decision making in close quarter situations, collision risk should be considered as a continuous monotonic function of the proximities and risk perception should be considered probabilistically. This paper derives an ordered probit regression model to study perceived collision risks. To illustrate the procedure, the risks perceived by Singapore port pilots were obtained to calibrate the regression model. The results demonstrate that a framework based on the probabilistic risk assessment model can be used to give a better understanding of collision risk and to define a more appropriate level of evasive actions.     

人工神经网络方法在拟建小区域环境质量评价中的应用

人工神经网络的评价方法用于小区域环境质量评价中,根据本地区特点因地制宜地选择环境质量参数,代入模型中进行环境质量评价及预测,对用于环境质量评价的BP人工神经网络模型进行了改进,即对网络模型的训练样本进行了扩充,从而提高了模型的抗干扰能力和准确性.将改进了的BP人工神经网络模型应用于四川省资阳市沱江二桥拟建项目小区域的大气、地表水环境质量评价中, 对该市小区域大气、地表水环境质量状况进行评价,评价结果表明,BP人工神经网络模型用于环境质量评价是可行的,且评价结论客观,评价模型普遍适用.