Reproductive biology of the spiny lobster, <Emphasis Type="Italic">Panulirus Penicillatus</Emphasis>, in the southeastern coastal waters off Taiwan

The reproductive biology of spiny lobster, Panulirus penicillatus, was studied based on 2,068 lobsters, ranging from 34.28 to 131.60 mm carapace length (CL), sampled in Taitung coastal waters from September 2003 to December 2004. The overall sex ratio approximated 1:1 (χ² = 0.02, P > 0.05), but the monthly sex ratios in 2004 showed significant differences and males were predominant in sizes larger than 80 mm CL. Reproductive activity, assessed using histology, a gonadosomatic index and percentage of ovigerous females, indicated that the mature females could be found in every month and that the major spawning occurred from May to September. The presence of re-developing/re-ripe ovaries by month and size-specific spawning time suggest that larger mature females (>60 mm CL) spawn at least three times a year while smaller new mature females spawn at least once a year. For females, the estimated sizes at 50% physiological and functional maturity were (mean ± SE) 56.46 ± 0.56 mm CL and 66.63 ± 1.07 mm CL. The estimated sizes at functional maturity were between 72 and 74 mm CL for males. The number of eggs per spawning event (brood size, BS) was related to CL by the equation Y _BS = 2.4 × 10^-3CL^4.18 (r ² = 0.902, n = 12). Female lobsters with CL ranging from 60 to 80 mm made the greatest contributions to egg production because of their high brood size and active reproductive activity. A minimum legal size should be established for the fishery to protect egg production potential of lobster population in the southeastern coastal waters off Taiwan.     

Monitoring of Gin Drinkers' Bay landfill,Hong Kong: I. Landfill gas on top of the landfill

The present study centered on the composition of landfill gas and its effects on soil and plants at the Gin Drinkers' Bay (GDB) landfill in Hong Kong This first part of the study was a whole-year monitoring of landfill gas composition in the gas ventilation system installed on top of the landfill Methane, carbon dioxide, oxygen, and ethylene were measured It was shown that gas generation was positively correlated with the amount of precipitation and air temperature and negatively correlated with atmospheric pressure     

Gravimetric analysis for PM2.5 mass concentration based on year-round monitoring at an urban site in Beijing

Daily PM_(2.5)(particulate matter with an aerodynamic diameter of below 2.5 μm) mass concentrations were measured by gravimetric analysis in Chinese Research Academy of Environmental Sciences(CRAES), in the northern part of the Beijing urban area, from December 2013 to April 2015. Two pairs of Teflon(T1/T2) and Quartz(Q1/Q2) samples were obtained, for a total number of 1352 valid filters. Results showed elevated pollution in Beijing,with an annual mean PM_(2.5)mass concentration of 102 μg/m~3. According to the calculated PM_(2.5)mass concentration, 50% of our sampling days were acceptable(PM_(2.5) 75 μg/m~3), 30% had slight/medium pollution(75–150 μg/m~3), and 7% had severe pollution( 250 μg/m~3). Sampling interruption occurred frequently for the Teflon filter group(75%) in severe pollution periods,resulting in important data being missing. Further analysis showed that high PM_(2.5)combined with high relative humidity(RH) gave rise to the interruptions. The seasonal variation of PM_(2.5)was presented, with higher monthly average mass concentrations in winter(peak value in February, 422 μg/m~3), and lower in summer(7 μg/m~3 in June). From May to August, the typical summer period, least severe pollution events were observed, with high precipitation levels accelerating the process of wet deposition to remove PM_(2.5). The case of February presented the most serious pollution, with monthly averaged PM_(2.5)of 181 μg/m~3 and 32% of days with severe pollution. The abundance of PM_(2.5)in winter could be related to increased coal consumption for heating needs.     

Laboratory Measurement of Dry Deposition of Ozone onto Northern Chinese Soil Samples

We used laboratory experiments to investigate surface resistance (R _c) to dry deposition of ozone (O₃) on different types of soil samples collected from the arid deserts and the Loess Plateau of northern China. Furthermore, we measured the factors that affected R _c, which depends on the physical and chemical interaction between trace constituents and the deposition surface, and evaluated deposition velocity (V _d). There was little influence of geometric surface area, soil weight, or O₃ concentration on V _d of O₃. The effect of relative humidity (RH) (i.e. moisture content of the soil) on O₃ uptake was in agreement with results reported in the literature: a distinct RH dependence of V _d and little uptake under water-saturated conditions were observed. R _c values for all the soil samples examined were in the range 0.21–3.3 s mm⁻¹ and were exponentially related to the surface area of the particles and the organic carbon content of each soil sample at RH of both <10 and 60%.     

A distributed fibre optic approach for providing early warning of Corrosion Under Insulation (CUI)

A novel fully distributed fibre optic humidity sensor technology suitable for spatially continuous monitoring of water ingress under pipeline insulation is reported. Results from controlled water ingress tests are presented, where the fibre cables were mounted on pipes insulated with air gap cell glass and aerogel insulation. The experiments revealed that the fibre optic sensor responded to water ingress equivalent to <10 ml/metre pipe, under air gap cell glass insulation. The fibre optic measurements were validated by comparison with conventional calibrated point humidity sensors. A compensation methodology using a reference optical fibre was used to effectively reduce the effect of temperature variations on the measurements. The ability of the sensor to monitor the spatial evolution of water ingress with cm scale resolution was demonstrated, as was the feasibility to make accurate water ingress measurement over 2 km fibre lengths. The technology could be used to assist targeted inspection campaigns aimed at minimizing the risk of Corrosion Under Insulation (CUI).     

Air quality and respiratory health in Delhi

Delhi is an instructive location for studying the impact of air pollution since it is a rapidly expanding centre of government, trade commerce and industry. We have made an attempt to (1) determine the association between environmental pollution and respiratory morbidity in Delhi for the period 1998–2004, (2) assess the impact on hospital admission of the implementation of recent governmental regulations and (3) calculate the relative risk of hospitalization due to respiratory ailments caused by air pollutants. Seven hospitals from different parts of Delhi were selected. The pollution profiles of these areas were assessed and subsequently Poisson regression model was performed for the patient population. There was a remarkable decrease in monthly average concentration of sulphur dioxide (from 17.9 to 11.1 μg m⁻³) and increase in monthly average concentration of nitrogen dioxide (from 34.2 to 49.1 μg m⁻³) after the newly introduced regulations. Particulates were observed to have marginal fall in their concentration but still remained above the permissible limits. Gaseous pollutants, in spite of being at a level lower than the permissible level, showed more consistent significant association with respiratory admissions. The relative risks of hospitalization due to respiratory diseases were in the range of 1.07–2.82 in residential cum commercial areas. Comparative study of pre and post new stringent governmental regulation showed significant positive association of NO₂ with respiratory disorders in southern (RR: 1.10; CI: 1.09–1.12) and northern regions (RR: 1.33; CI: 1.27–1.39), both mixed use areas. In spite of the improvement in the air quality, the associated health effects were found to be substantial.     

Observations on phytoplankton productivity in relation to hydrography in the Northern Adriatic

This work, carried out within the framework of the PRISMA II project, aims at evaluating the effects of the Po River flow on primary productivity, measured by C with in situ sample incubations. A total of four cruises was carried out in late winter and early summer (1996-1998) along transects from the coast offshore. In both seasons, the highest primary productivity was found in the most oligohaline stations. The effects of the Po River inputs were therefore clearly evident in the westernmost area, both in high productivity values and in the shape of productivity profiles. In late winter, extensive blooms of Skeletonema costatum and Pseudo-nitzschia delicatissima resulted in productivity values that were sometimes higher than in early summer. In early summer 1996, greatly reduced river flow clearly influenced productivity which was much lower than in 1997.     

Modeling soil and plant phosphorus within DSSAT

The crop models in the Decision Support System for Agrotechnology Transfer (DSSAT) have served worldwide as a research tool for improving predictions of relationships between soil and plant nitrogen (N) and crop yield. However, without a phosphorus (P) simulation option, the applicability of the DSSAT crop models in P-deficient environments is limited. In this study, a soil-plant P model integrated to DSSAT was described, and results showing the ability of the model to mimic wide differences in maize responses to P in Ghana are presented as preliminary attempts to testing the model on highly weathered soils. The model simulates P transformations between soil inorganic labile, active and stable pools and soil organic microbial and stable pools. Plant growth is limited by P between two concentration thresholds that are species-specific optimum and minimum concentrations of P defined at different stages of plant growth. Phosphorus stress factors are computed to reduce photosynthesis, dry matter accumulation and dry matter partitioning. Testing on two highly weathered soils from Ghana over a wide range of N and P fertilizer application rates indicated that the P model achieved good predictability skill at one site (Kpeve) with a final grain yield root mean squared error (RMSE) of 535 kg ha⁻¹and a final biomass RMSE of 507 kg ha⁻¹. At the other site (Wa), the RMSE was 474 kg ha⁻¹ for final grain yield and 1675 kg ha⁻¹ for final biomass. A local sensitivity analysis indicated that under P-limiting conditions and no P fertilizer application, crop biomass, grain yield, and P uptake could be increased by over 0.10% due to organic P mineralization resulting from a 1% increase in organic carbon. It was also shown that the modeling philosophy that makes P in a root-free zone unavailable to plants resulted in a better agreement of simulated crop biomass and grain yield with field measurements. Because the complex soil P chemistry makes the availability of P to plants extremely variable, testing under a wider range of agro-ecological conditions is needed to complement the initial evaluation presented here, and extend the use of the DSSAT-P model to other P-deficient environments.     

Temperature and relative humidity distributions in a medium-size administrative town in southwest Nigeria

This study was carried out in one of the medium-sized public administrative towns in the southwestern part of Nigeria. Its aim is to highlight the effect of spatial distribution of settlements, population, and socio-economic activities on urban air temperature and humidity in the town. Temperature and relative humidity data from 1992 to 2001 were obtained from three meteorological stations in Akure, the Administrative Capital of Ondo State, Nigeria. The stations are located within the Federal Ministry of Aviation, Akure Airport (FMA), Federal University of Technology, Akure (FUTA) and Federal School of Agriculture (SOA). Air temperature and relative humidity measurements were also obtained from 27 points, which were cited to include road junctions, markets, built up areas, etc., using sling psychrometer. The data were subsequently analysed for spatial and temporal variations using statistical packages (SPSS and Microsoft Excel) and isolines. Actual vapour pressure and dew point temperature were computed using Magnus conversion formulae. The results obtained showed that spatial variation was insignificant, in terms of the temperature and humidity variables. The annual mean temperature (Tmean) ranged between 21.9 and 30.4 degrees C while minimum (Tmin) and maximum (Tmax) temperatures varied from 13 to 26 and 21.5-39.6 degrees C, respectively. Relative humidity (RH), actual vapour pressure (Es) and dew point temperature (Td) values also varied from 39.1% to 98.2%, 19.7-20.8 gm(-3), and 17.3-17.8 degrees C, respectively. A significant relationship (p>0.6; r<0.05) between Tmin, Es and Td was observed while the daytime 'urban heat island' intensity (UHI) ranged between 0.5 and 2.5 degrees C within the study period. The study concluded that there is influence of urban canopy on the microclimate of Akure, and hypothesizes that the urban dwellers may be subjected to some levels of weather related physiological disorderliness.