A decision framework for possible remediation of contaminated sediments in the River Kymijoki, Finland

Background, aim, and scope  The paper describes the spatial contamination of the River Kymijoki, South-Eastern Finland, and the coastal region of the Gulf of Finland with PCDD/Fs and mercury. The findings of ecotoxicologial and human health studies are also reported, including environmental and human risk assessments. Sediments from the River Kymijoki, draining into the Gulf of Finland, have been heavily polluted by the pulp and paper industry and by chemical industries. A wood preservative, known as Ky-5, was manufactured in the upper reaches of the river between 1940 and 1984 causing severe pollution of river sediments with polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF). Moreover, the sediments have been polluted with mercury (Hg) from chlor-alkali production and the use of Hg as a slimicide in pulp and paper manufacturing. Materials and methods  An extensive sediment survey was conducted as well as sediment transport modeling, toxicity screening of sediment invertebrates, and a survey of contaminant bioaccumulation in invertebrates and fish. Studies on human exposure to PCDD/Fs and the possible effects on hypermineralization of teeth as well as an epidemiological study to reveal increased cancer risk were also conducted. An assessment of the ecological and human health risks with a null hypothesis (no remediation) was undertaken. Results  The sediment survey revealed severe contamination of river and coastal sediments with PCDD/Fs and Hg. The total volume of contaminated sediments was estimated to reach 5 × 10⁶ m³ and hot spots with extremely high concentrations (max 292,000 ng g⁻¹ or 1,060 ng I-TEQ g⁻¹ d.w.) were located immediately downstream from the pollution source (approximately 90,000 m³). Sediment contamination was accompanied by changes in benthic assemblages, but direct effects were masked by many factors. The fish showed only slightly elevated PCDD/F levels in muscle, but orders of magnitude higher in the liver compared with reference freshwater sites and the Baltic Sea. The concentrations in human fat did not reveal high human exposure in the Kymijoki area in general and was lower than in sea fishermen. The relative risk for total cancer among farmers was marginally higher (RR = 1.13) among those living close to the river, compared with farmers living further away, and the possibility of increased cancer risk cannot be ruled out. A conservative risk assessment revealed that the present probability of exceeding the WHO upper exposure limit of 4 pg WHO-TEQ kg⁻¹ d⁻¹ for PCDD/Fs and DL-PCBs was 6%. The probability of exceeding the WHO limit value of 0.23 μg kg⁻¹ d⁻¹ for methyl mercury was estimated to be notably higher at 62%. Based on these studies and the estimated risks connected with different remediation techniques a general remediation plan with cost benefit analysis was generated for several sub-regions in the river. Dredging, on-site treatment, and a close disposal of the most contaminated sediments (90,000 m³) was suggested as the first phase of the remediation. The decision regarding the start of remediation will be made during autumn 2008. Conclusions  The sediments in the River Kymijoki are heavily polluted with PCDD/Fs and mercury from earlier chlorophenol, chlor-alkali, and pulp and paper manufacturing. A continuous transport of contaminants is taking place to the Gulf of Finland in the Baltic Sea. The highly increased PCDD/F and Hg levels in river sediments pose an ecotoxicological risk to benthic fauna, to fish-eating predators and probably to human health. The risks posed by mercury exceed those from PCDD/Fs and need to be evaluated for (former) chlor-alkali sites and other mercury releasing industries as one basis for remediation decision making. Recommendations and perspectives  The studies form the basis of a risk management strategy and a plan for possible remediation of contaminated sediments currently under consideration in the Southeast Finland Regional Environment Centre. It is recommended that a detailed restoration plan for the most seriously contaminated areas should be undertaken. Based on current knowledge, the restoration of the whole river is not feasible, considering the current risk caused by the contaminated sediment in the river and the costs of an extensive restoration project. The experiences gained in the present case should be utilized in the evaluation of PCDD/F- and mercury-contaminated sites in other countries. The case demonstrates that the historic reservoirs are of contemporary relevance and should be addressed, e.g., in the national implementation plans of the Stockholm Convention. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

An imprecise fuzzy risk approach for water quality management of a river system

Uncertainty plays an important role in water quality management problems. The major sources of uncertainty in a water quality management problem are the random nature of hydrologic variables and imprecision (fuzziness) associated with goals of the dischargers and pollution control agencies (PCA). Many Waste Load Allocation (WLA) problems are solved by considering these two sources of uncertainty. Apart from randomness and fuzziness, missing data in the time series of a hydrologic variable may result in additional uncertainty due to partial ignorance. These uncertainties render the input parameters as imprecise parameters in water quality decision making. In this paper an Imprecise Fuzzy Waste Load Allocation Model (IFWLAM) is developed for water quality management of a river system subject to uncertainty arising from partial ignorance. In a WLA problem, both randomness and imprecision can be addressed simultaneously by fuzzy risk of low water quality. A methodology is developed for the computation of imprecise fuzzy risk of low water quality, when the parameters are characterized by uncertainty due to partial ignorance. A Monte-Carlo simulation is performed to evaluate the imprecise fuzzy risk of low water quality by considering the input variables as imprecise. Fuzzy multiobjective optimization is used to formulate the multiobjective model. The model developed is based on a fuzzy multiobjective optimization problem with max–min as the operator. This usually does not result in a unique solution but gives multiple solutions. Two optimization models are developed to capture all the decision alternatives or multiple solutions. The objective of the two optimization models is to obtain a range of fractional removal levels for the dischargers, such that the resultant fuzzy risk will be within acceptable limits. Specification of a range for fractional removal levels enhances flexibility in decision making. The methodology is demonstrated with a case study of the Tunga–Bhadra river system in India.     

The consequences of failure should be considered in siting geologic carbon sequestration projects

Geologic carbon sequestration is the injection of anthropogenic CO₂ into deep geologic formations where the CO₂ is intended to remain indefinitely. If successfully implemented, geologic carbon sequestration will have little or no impact on terrestrial ecosystems aside from the mitigation of climate change. However, failure of a geologic carbon sequestration site, such as large-scale leakage of CO₂ into a potable groundwater aquifer, could cause impacts that would require costly remediation measures. Governments are attempting to develop regulations for permitting geologic carbon sequestration sites to ensure their safety and effectiveness. At present, these regulations focus largely on decreasing the probability of failure. In this paper we propose that regulations for the siting of early geologic carbon sequestration projects should emphasize limiting the consequences of failure because consequences are easier to quantify than failure probability.     

A survey on the public perception of CCS in France

An awareness and opinion survey on carbon capture and storage (CCS) was conducted on a representative sample of French residents aged 15 years and above. About 6% of respondents were able to provide a satisfactory definition of the technology. The key question about ‘approval of or opposition to’ the use of CCS in France was asked twice, first after presenting the technology, then after explaining its potential adverse consequences. The approval rates, which were 59% and 38%, respectively, show that there is no a priori rejection of the technology. The sample was split in two to test for a semantic effect: half of the questionnaires used “Stockage” (English: storage), the other half “Sequestration”. Manipulating the vocabulary had no statistically significant effect on approval rates. Stockage is more meaningful, but does not convey the idea of permanent monitoring.     

Risk assessment tools incorporating human error probabilities in the Japanese small-sized establishment

Although it has been estimated that as many as 80% of all occupational accidents have human errors as a cause, no risk assessment tools incorporating human-related elements have been developed for small companies. Human error probability (HEP) and human error analysis (HEA) have been used for large-scale, safety-critical industries for last three decades, but these tools are not suitable for smaller, more general industries that comprise the majority of accident settings.Here, we describe and verify a risk assessment tool that includes human-related elements for small companies. The tool expands on traditional risk assessment methods, such as matrix, risk graph and numerical scoring method, by adding human-related elements. The tool is easy-to-use in occupational environments, and includes assessments of human behavior and potentially outdated machinery at work place.     

Pilot sample risk analysis for underground coal mine fires and explosions using MSHA citation data

After three decades of sustained continuous improvement of mine safety performances in the US, mine disasters in 2006 and 2007 compromised an excellent record and presented new challenges and vulnerabilities for the underground coal mining industry. In the aftermath of the incidents, formal investigations and new scrutiny of mine safety by the US Congress and expert study groups followed. The US Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which mandated new laws to address the issues, including those related to mine fires and explosions from which miners must be protected. The National Mining Association-sponsored Mine Safety Technology and Training Commission report highlighted the role of risk analysis and management in identifying and controlling major hazards, such as fires and explosions. In this paper an approach is given for analyzing the risks for fires and explosions based on the Mine Safety and Health Administration citation database. Using 2006 citation data and focusing on subsystem failures, the methodology is applied to a database for a pilot sample of underground coal mines stratified by mine size and state.     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

净水厂氯气泄漏的环境风险分析

以丹阳净水厂为例,选取大气非正常排放模式,预测了液氯钢瓶阀门泄漏及爆炸对周围环境和保护目标的影响,并模拟了钢瓶爆裂事故的后果,计算出事故发生时的初始警戒区半径,提出了相应的氯气泄漏防范措施。     

A Sensitivity Analysis of an Integrated Modelling Approach to Assess the Risk of Wind-borne Spread of Foot-and-mouth Disease Virus from Infected Premises

The sensitivity of an integrated model to assess the potential for wind-borne spread of foot-and-mouth disease (FMD) to variations in key parameters controlling different physical and biological processes was evaluated. The estimated number of farms at risk is sensitive to the virus strain used and the accompanying effective contact rate. The C Noville strain increased the estimated number of exposed farms ranked as high and medium risk of being infected by a factor of 5, compared to the baseline, based on the O UKG 2001 strain. The inclusion of a model for biological ageing of the virus can also have a significant effect on the concentration patterns arising from transport and dispersion of the virus. Its inclusion has the practical advantage of markedly reducing the time required for the calculations. The estimated number of farms affected by exposure to high and medium virus concentrations is not grossly sensitive to attenuation caused by temperature or relative humidity effects. Changes in susceptibility to infection, as determined by the parameter θ in the exposure-risk model, does not change the configuration of the virus plumes, but it does change the distribution of farms at risk by risk category. These findings suggest that a good understanding of characteristics (excretion rates from infected animals, susceptibility of different species to infection, virus survival, etc.) of the virus strain involved in an FMD outbreak is necessary to provide a reliable assessment of the risk of wind-borne spread. In the event of an incursion of FMD, provision for laboratory studies on the virus will be an essential component of the disease response and should be factored into contingency plans.