Impact of heavy metals of industrial plant wastewater on benthic communities of Bizerte Lagoon (Tunisia)

ABSTRACT

The aim of this study was to assess the consequences of human impact on the characteristics of sediments heavy metal concentration, grain size and its influence on the structure of the microbial and meiofaunal community assemblages. A survey was carried out in July 2013 within six sites located in the Bizerte Lagoon (Tunisia), both downstream and upstream of industrial effluents. The highest total sediment metal concentrations were detected in stations located close to the industrial sewage discharge points. In these stations, the lowest densities of the total meiofauna (33?±?13?ind/10?cm^?2) and conversely the highest densities of cultivable bacteria that are heavy metal resistant have been reported (16?±?80.34?CFU?g^?1). Univariate (ANOVA) and multivariate (MDS/CCA) analyses demonstrate high dissimilarity (0.06) in meiofaunal and bacterial community structures between downstream and upstream industrial sewages. Furthermore, canonical correspondence analysis CCA results indicated that heavy metal sediment contamination promoted bacteria that are resistant to heavy metals, while heterotrophic bacteria supported the development of meiofauna taxa. The results highlight the importance of bacteria/meiofauna interactions, as both meiofaunal and microbial communities give indications of the ecological impact of heavy metal contamination in sediment.     

Estimation of Similarity in the Qualitative Composition of Humic Substance in Marine Sediments By Means of an Uv-Spectroscopic Library

In this paper a method for the study of the qualitative similarity of extractable humic substance (EHS) in marine sediments based on the realisation of UV spectral library of EHS is described. the spectral library was built including the digitised spectra of humic substance extracted from several marine sediments (46 samples) and two samples of standard materials (lignin sulphonate and humic substance) in a Statistica data file. the data matrix was elaborated by means of different multivariate statistic techniques such as Cluster Analysis (CA), Principal Components Analysis (PCA) and the univariate technique Spectral Correlation Analysis (SCA). This approach allows us to show the contribution of different organic compounds (aromatic, lipid and acid) to the composition of EHS and moreover it evidences also the structural characteristics of EHS in terms of similarities in the qualitative composition of samples such as presence of terrestrial and/or vegetal contributions. the UV library is an objective tool to study the qualitative composition of EHS and it represents a complementary approach to the most common methods based on the application of spectroscopic (IR, ¹³CNMR), potentiometric and chromatographic techniques.     

Geochemical forms of trace metals in mangrove sediments—Red Sea (Egypt)

Seven sediment samples from mangrove sediments of the Red Sea were taken in order to evaluate the possible contamination of the sediments by trace metals (iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), lead (Pb) and cadmium (Cd)). Sequential extraction techniques were performed to study the different geochemical forms of these metals. X-ray diffraction analysis has been performed to correlate the mineralogical composition with the geochemical forms of the studied elements. The results of Fe and Mn contents indicate that they are in large part from lithogenous origin. The elevated concentrations are associated with the residual form ranged from 70 to 93% for Fe and 46 to 70% for Mn. The percentage of Zn, Cu, Cd and Pb in the non-residual form was much greater than that of the residual fractions. This reflects the high mobility and bioavailability of these metals in mangrove sediments of the Red Sea. X-ray diffraction analysis revealed the presence of silicate components including quartz, feldspars and clay minerals in some locality. Non-silicate components recorded in the study area as calcite as well as, Mg-calcite. Quantitatively both components i.e. silicate and carbonate varied according to their source material.     

Spatial distribution of copper in relation to recreational boating in a California shallow-water basin

The overall effect of the number of boats on the copper (Cu) levels in the water column and sediment, along with their spatial variability within Shelter Island Yacht Basin (SIYB), San Diego Bay, California was examined. We identified a horizontal gradient of increasing dissolved Cu and Cu in sediment from outside to the head of SIYB which was coincident with the increasing number of boats. Spatial models of Cu distribution in water and sediment indicated the presence of ‘hotspots’ of Cu concentration. From outside to the head of SIYB, dissolved Cu ranged from 1.3 μ g L^?1 to 14.6 μ g L^?1 in surface water, and 2.0 μ g L^?1 to 10.2 μ g L^?1 in bottom water. Cu in sediment exceeded the Effect Range Low of 34 mg kg^?1 (i.e. where adverse effects to fauna may occur), with a peak concentration of 442 mg kg^?1 at the head of the basin. Free Cu⁺⁺ in surface water was several orders of magnitude higher than in sediment porewater. High-resolution data of Cu species together with probability maps presented in this paper will allow managers to easily visualise and localise areas of impaired quality and to prioritise which areas should be targeted to improve Cu-related conditions.     

The Influence of Anthropogenic Contamination On Metals Release From Coastal Sediment Suspensions with Aerated Sea Water

The zinc, cadmium, copper and lead release from the uncontaminated and contaminated coastal sediments with aerated sea water was studied. the metals transfer to the dissolved forms was monitored during one-two months by differential pulse anodic voltammetry (DPASV). the sediments with different initial degree of contamination were sampled in the Peter the Great Bay, Sea of Japan around Vladivostok-the biggest city in Russian Far East. Sediment contamination by metals led to increased release to solution of zinc due to sulphide oxidation and cadmium on account of organic matter decomposition. the copper behaviour was complicated by strong binding with organic matter and enhancements of copper release can only be seen in sediment with a low organic matter content. Significant lead transfer to dissolved forms was not observed regardless of sediment contamination. the temperature affected the release of cadmium and copper through enhanced organic matter destruction. the dissolved metal fluxes from the sediment transformation are compared with metal fluxes towards bottom. Such comparisons show that second contamination by dissolved metals of the studied coastal environment may be important for cadmium only.     

The status of heavy metal levels in a Ramsar site,Kuala Gula bird sanctuary: the impact of the anthropogenic inputs

Distributions of Cd, Cu, Pb, and Zn in the surface sediments from two sites of the Kuala Gula Bird Sanctuary, Malaysia were monitored for a period of 6 months from October 2006 to March 2007. In December 2006, the concentration of Zn in one location was significantly (p??1) than the other metals at both sites, but in the oxidizable organic fraction it was highest at both sites during October; with mean concentrations of 18?mg?kg^?1 at both locations. In the acid-reducible fraction, high concentrations of Pb (2.3?mg?kg^?1) were detected at station 2 in February 2007, being highest among all four metals at both stations. The acid-reducible fraction found in Pb ranged from 0.10% to 3.1% in both stations. Percentages ranging from 51% to 96% were observed for all four metals in the resistant fraction throughout the sampling period. These results indicate low contributions from anthropogenic sources. The findings constitute a baseline data archive for future reference.     

东湖、汤逊湖和梁子湖沉积物磷形态及pH对磷释放的影响

文章采用淡水沉积物中磷形态标准测试程序(SMT)研究了东湖、汤逊湖和梁子湖沉积物中磷的形态分布,并比较了不同pH条件下沉积物磷释放特征的差异性。结果表明:东湖沉积物总磷质量分数最高,平均值1.232 mg.g-1,其次为汤逊湖(0.762mg.g-1),梁子湖沉积物总磷质量分数最低(0.572 mg.g-1);3个湖泊上覆水总磷质量浓度也表现出类似的变化规律,线性相关性分析显示上覆水中总磷质量浓度与沉积物总磷质量分数显著正相关。东湖和梁子湖沉积物总磷中无机磷和有机磷所占比例较接近,汤逊湖无机磷所占比例远低于有机磷。不同湖泊之间磷形态的分布并没有一定的规律性,湖泊的地理分布以及人为因素可能是造成磷形态差异的主要因素。当pH为2.0~7.0时,3个湖泊沉积物中溶解性活性磷(SRP)释放量均呈先增加后减小的趋势;当pH为7.0~12.0时,SRP释放量呈增加趋势。相关分析结果表明,SRP的释放与有机质的质量分数无显著相关性。方差分析结果显示3个湖泊沉积物在黏粒和粉粒组成上均没有显著差异(P>0.1),表明实验样品的粒径组成不是造成各个湖泊间磷释放差异的原因。不同pH条件下,SRP释放量与沉积物总磷质量分数显著正相关;酸性环境下,SRP释放量与酸式磷(HCl-P)的相关性优于碱式磷(NaOH-P),碱性环境下则刚好相反。     

Interactions Among the Copper Species and Forms in Sea Water/Sediments and Copper Bioaccumulation in Oysters

Abstract

Earlier papers indicated that the first incident of green discoloration in oysters (Crassostrea gigas) and the mass mortality observed in 1986 along the Taiwan Erhjin Chi coastal area were caused by the higher contents of total copper and copper species (mainly bioavailable and free ion) in sea water. the copper in sea water would be sorbed by suspended matter and transferred to sediments, and the copper in the sediments would also be desorbed to sea water. Processes of copper adsorption and desorption are the major factors influencing the contents of total copper and copper species in sea water and sediments. in this study, the Erhjin Chi sediments were mixed with sea water by a shaker technique. When the mixture was shaken for one hour, analogous to tidal mixing in estuaries, only copper desorption from sediments was observed. If the shaking time is increased for more than 3 hours, the copper released from the sediments was resorbed to the remaining solid phases. the higher the contents of mud (91.71%) and total copper (701 mg kg^?1) in sediments, the higher the copper desorption rate (1.86 ppm hr^?1) and copper adsorption rate (0.50 ppm hr^?1) were observed. in sediments containing lower mud (0.80%) and lower copper (43.5 mg kg^?1), the copper desorption and adsorption rates were 0.83 ppm hr^?1 and 0.22 ppm hr^?1, respectively. the interactions among the total copper and copper species in sea water and sediments, chemical and ecological parameters, and copper bioaccumulation in oysters in the Erhjin Chi estuarine and coastal area are also discussed.     

Exigency for fusion of graphene and carbon nanotube with biomaterials

Biomaterial industry is a widely growing field that is closely related to advanced materials. With development in fabrication techniques new materials are being created by researchers daily. The currently used biomaterials for biomedical applications have some limitations. This review examines those limitations such as corrosion, short fatigue life, less wear resistance, and inadequate mechanical properties. These limitations may lead to adverse effects. To overcome these limitations carbon-based nanomaterials may be incorporated such that these biomaterials reach the level of ideal biomaterials. Upgrade of biomaterials with graphene and carbon nanotubes (CNTs) needs to be done only after checking the safety profile of these materials. Biocompatibility of functionalized graphene and CNT is found to be adequate for the use in many applications such as drug delivery, biosensing and imaging, cancer therapeutics, and tissue regeneration whereas pristine graphene and CNT may produce adverse effects. The potential of carbon-based nanomaterials and graphene (and its derivatives) in overcoming those limitations and enhancing biological activities of ongoing biomaterials by acting as composites and coating material is examined. In addition, nanomaterials employ new techniques in biomedical application such as cancer therapy for more efficient results.     

Heavy metals in coastal sediments in Guipuzcoa (Spain)∗

Surficial sediment samples were wet digested (HNO₃‐HCI‐HF) and analysed by atomic absorption spectroscopy. The background values in the area, and the Pollution Index Load in the sampling points were calculated. Metal inputs of continental origin are specially important in Deva, Oria and Urola river mouths.