塑料增塑剂对凡纳滨对虾存活、生长和免疫的影响(Effects of Plastic Plasticizers on Survival, Growth and Immune Factors of Litopenaeus vannamei)

研究了塑料增塑剂邻苯二甲酸二甲酯(DMP)、邻苯二甲酸二乙酯(DEP)、邻苯二甲酸二丁酯(DBP)和邻苯二甲酸二辛酯(DOP)对凡纳滨对虾(Litopenaeus vannamei)存活、生长和免疫的影响.96h急性毒性实验表明,在助溶剂Tween20的安全浓度范围内,随着DMP、DEP、DBP和DOP水平的升高,凡纳滨对虾存活率呈下降趋势,24h、48h、72h和96h的LC50分别为40.33、35.29、25.48、19.14mg·L-1,30.52、23.45、16.96、15.38mg·L-1,7.51、6.97、6.57、6.06mg·L-1和6.85、5.87、5.01、4.47mg·L-1;DMP、DEP、DBP和DOP对凡纳滨对虾的安全浓度随塑料增塑剂碳链的增加呈下降趋势,分别为8.11、4.15、1.80和1.29mg·L-1.90d慢性毒性实验表明,凡纳滨对虾存活率、特定生长率、血清蛋白含量、血清酚氧化酶和超氧化物歧化酶活性均以对照组和0.0400mg·L-1助溶剂Tween20处理组最高,而且显著高于1/100倍DMP、DEP、DBP和DOP安全浓度处理组(p<0.05).     

Response of organic aerosol characteristics to emission reduction in Yangtze River Delta region

● The emission reduction causes significant change in organic aerosol composition. ● The atmospheric oxidizing capacity improved during emission reduction. ● The mixed oxygenated organic aerosol contributed higher during emission reduction. Organic aerosol (OA) is a major component of atmospheric particulate matter (PM) with complex composition and formation processes influenced by various factors. Emission reduction can alter both precursors and oxidants which further affects secondary OA formation. Here we provide an observational analysis of secondary OA (SOA) variation properties in Yangtze River Delta (YRD) of eastern China in response to large scale of emission reduction during Chinese New Year (CNY) holidays from 2015 to 2020, and the COVID-19 pandemic period from January to March, 2020. We found a 17% increase of SOA proportion during the COVID lockdown. The relative enrichment of SOA is also found during multi-year CNY holidays with dramatic reduction of anthropogenic emissions. Two types of oxygenated OA (OOA) influenced by mixed emissions and SOA formation were found to be the dominant components during the lockdown in YRD region. Our results highlight that these emission-reduction-induced changes in organic aerosol need to be considered in the future to optimize air pollution control measures.     

Recycling disposable cups into paper plastic composites

The majority of disposable cups are made from paper plastic laminates (PPL) which consist of high quality cellulose fibre with a thin internal polyethylene coating. There are limited recycling options for PPLs and this has contributed to disposable cups becoming a high profile, problematic waste. In this work disposable cups have been shredded to form PPL flakes and these have been used to reinforce polypropylene to form novel paper plastic composites (PPCs). The PPL flakes and polypropylene were mixed, extruded, pelletised and injection moulded at low temperatures to prevent degradation of the cellulose fibres. The level of PPL flake addition and the use of a maleated polyolefin coupling agent to enhance interfacial adhesion have been investigated. Samples have been characterised using tensile testing, dynamic mechanical analysis (DMA) and thermogravimetric analysis. Use of a coupling agent allows composites containing 40 wt.% of PPL flakes to increase tensile strength of PP by 50% to 30 MPa. The Young modulus also increases from 1 to 2.5 GPa and the work to fracture increases by a factor of 5. The work demonstrates that PPL disposable cups have potential to be beneficially reused as reinforcement in novel polypropylene composites.     

Differences of the oxidation process and secondary organic aerosol formation at low and high precursor concentrations

Current atmospheric quality models usually underestimate the level of ambient secondary organic aerosol(SOA), one of the possible reasons is that the precursors at different concentrations may undergo different oxidation processes and further affect SOA formation. Therefore, there is a need to perform more chamber studies to disclose the influence. In this work, SOA formation over a wide range of initial precursor concentrations(tens of ppb to hundreds of ppb levels) was investigated in a 30 m3 indoor smog chamber,and mainly through the analysis of multiple generations of VOCs detected from HR-To FPTRMS to expound the difference in the oxidation process between low and high precursor concentrations. Compared to high initial concentrations, gas-phase intermediates formed at low concentrations had a higher intensity by about one order of magnitude, and the lowvolatility compounds also had a higher formation potential due to the competition between semi-volatile intermediates and precursors with oxidants. In addition, the formed SOA was more oxidized with higher f44 value(0.14 ± 0.02) and more relevant to real atmosphere than that formed at high concentrations. This work should help to deeply understand SOA formation and improve the performance of air quality models for SOA simulation.     

海洋微塑料污染状况及其应对措施建议

海洋塑料垃圾污染是人类面临的最为急迫的全球海洋环境问题之一,已引起各国政府、公众、科学界、媒体及非政府组织等的广泛关注,并成为当前海洋生态与环境研究的热点问题之一,亟待应对和解决.从水体、沉积物及生物体内海洋塑料垃圾及微塑料污染特征、来源及归趋角度,阐述了海洋微塑料垃圾的分布特征、潜在生态风险和应对措施,以及国内外应对海洋塑料及微塑料污染所采取的管控措施,介绍了各国政府和非政府组织所提出的法律法规和公约倡议.鉴于当前鲜见典型区域塑料污染管控和生态风险评估体系研究,从科学研究和管理控制两个方面,进一步指出现阶段在海洋塑料垃圾及微塑料研究和管控方面存在的诸多问题,如方法学（采集、预处理和分析）的差异性,来源、输运与归趋尚不明确,生态风险评估体系未建立及相关管控的法律法规待健全等.在此基础上对我国海洋塑料和微塑料研究提出建议:①深入研究与国际接轨的标准化塑料及微塑料研究方法学（样本采集、预处理和分析）问题、准确估算入海通量、环境归趋及环境浓度下潜在的生态风险等;②支持开展海洋塑料垃圾和微塑料研究专题的大洋航次（太平洋和印度洋等）,系统地开展河流系统-深海海盆-极地等的海洋微塑料综合研究;③研发水环境中塑料和微塑料垃圾的拦截和处理技术,制定和强化塑料及微塑料管控的法律法规和政策措施;④建立完善的海洋塑料垃圾污染公共环境意识教育体系,以唤起公众对海洋污染的关注.      

基于应力强度因子的发动机连杆裂解力数值模拟分析

目的为获得合适的裂解力,以某款轿车发动机连杆为研究对象,应用扩展有限元法(Extended Finite Element Method,XFEM)对裂解工艺中的裂解力进行计算分析。方法根据部件的实际尺寸建立预制初始微裂纹条件下的连杆裂解有限元模型,确定相关的材料参数,并进行有限元网格划分,确定部件之间的约束类型。以应力强度因子大于材料断裂韧度,裂纹即扩展为依据,反复试算得出应力强度因子达到断裂韧度时的裂解力,进而通过大量计算和数据拟合得出初始微裂纹长度与裂解力之间的关系。分析裂解力对塑性区的影响,为裂解力阈值确定给出参考。结果当裂解力能够满足裂解工艺要求时,预制的初始微裂纹长度应尽可能小。结论最为理想的裂解力为材料断裂韧度对应的裂解力。文中提出的分析方法也适合于求解各类连杆的裂解力。     

塑料大气环境老化预测模型研究

目的为塑料老化行为预测提供简易而可靠的途径,充分发挥环境效应数据的内在价值。方法分别运用GM(1,1)模型、幂函数模型、指数函数模型、多项式模型预测9种工程塑料在3种典型大气环境下的拉伸强度、延伸率和弯曲强度等力学性能变化,并与自然环境试验实测结果进行比较。结果拉伸强度、延伸率、弯曲强度等3种力学性能中,弯曲强度预测效果最好,延伸率预测效果最差。4种模型之中,GM(1,1)模型在预测小样本数据方面具有最好的预测效果和最高的正确率,且在数据具有一定波动性的情况下仍能够保持较好的预测效果。结论在挖掘分析塑料大气老化评价指标和试验时间之间的函数关系时,不仅要考虑预测模型的拟合效果好坏、相关系数高低、预测误差和预测正确率高低,还应注意预测模型反映出来的塑料性能变化规律是否符合客观实际,这样得到的预测模型才能尽可能地反映塑料老化程度与试验时间关系的全貌。     

地膜覆盖和施氮对菜地N2O排放的影响

为了探讨地膜覆盖和不同施氮处理对菜地N_2O排放的影响,以位于西南大学农业部重庆紫色土生态环境重点野外科学观测试验站内辣椒-萝卜轮作菜地为研究对象,采用静态暗箱/气相色谱法,进行为期2 a的田间原位观测.试验设置8个处理,分别为对照常规(NN0)、对照覆膜(FN0),低N常规(NN1)、低N覆膜(FN1),中N常规(NN2)、中N覆膜(FN2),高N常规(NN3)、高N覆膜(FN3),研究地膜覆盖和施氮对菜地N_2O的排放特征和影响因素.结果表明,覆膜与常规两种种植方式对于菜地N_2O的排放体现出明显差异,表现为辣椒季常规显著大于覆膜(P 0. 05),萝卜季为覆膜显著大于常规(P 0. 05). 2014年5月至2016年4月观测期间,覆膜种植下无氮、低氮、中氮和高氮菜地N_2O年均累积排放量分别为244. 91、730. 49、903. 32和1 867. 45 mg·m-2,常规种植下N_2O年均累积排放量为221. 48、840. 33、1 256. 50和1 469. 67 mg·m-2.不同施氮梯度对于菜地N_2O的排放呈现为随施氮量增加N_2O的排放随之增加.通过计算N_2O排放系数可知,覆膜可以一定程度上降低辣椒季N_2O的排放系数,而萝卜季则没有明显规律. 2014年5月至2015年4月,辣椒季常规和覆膜种植下均为低氮菜地的N_2O排放系数最高,在萝卜季则显示为高氮排放系数最高; 2015年5月至2016年4月,则显示辣椒季为高氮菜地N_2O排放系数最高,而萝卜季低氮菜地最高. N_2O的排放通量和土壤氮素含量以及土壤温度呈显著相关关系,而地膜覆盖可一定程度地增加土壤中氮素的含量,进而影响菜地N_2O的排放通量.     

聚酯玻璃钢大气老化力学性能BP人工神经网络预报模型的建立

目的准确地分析并建立起一个老化模型,探究不饱和聚酯玻璃钢在大气环境中的条件与老化性能的变化联系。方法在气象数据的基础上分别分析不饱和聚酯玻璃钢在不同季节不同大气环境下各种力学性能的变化,利用数学建模的人工智能方法-BP神经网络进行建模。结果实际值与预测值有很好的一致性,模型精确度也较高。结论此预报模型可比较精确地评价不饱和聚酯玻璃钢在大气中的老化行为。     

地膜覆盖对稻-油轮作农田CH4和N2O排放的影响

以位于西南大学农业部重庆紫色土生态环境重点野外科学观测试验站内的稻-油轮作农田为研究对象,采用静态暗箱/气相色谱法,对覆膜与常规(不覆膜)两种处理下稻-油轮作农田CH_4和N_2O的排放特征及影响因素进行了为期一年的原位观测.结果表明,两种处理下,CH_4和N_2O的排放均主要集中在各作物的生长前期,水稻季CH_4和油菜季N_2O的排放通量均具有较明显的季节变化;全年CH_4的排放通量介于-0.45~1.90 mg·(m~2·h)~(-1),N_2O的排放通量介于-46.1~2 040.7μg·(m~2·h)~(-1).地膜覆盖提高了CH_4和N_2O排放总量,其中覆膜处理全年CH_4排放总量为(27.22±4.48)kg·hm~(-2),相比常规处理(19.93±0.56)kg·hm~(-2)提高了26.22%;覆膜处理N_2O的年排放总量为(13.14±0.82)kg·hm~(-2),较常规处理下(11.27±2.77)kg·hm~(-2)增加了16.6%.覆膜显著提高了油菜季土壤含水率,而对全年各作物季土壤温度(地下5 cm温度和地表温度)没有明显的影响.覆膜处理下油菜季CH_4和N_2O的排放与土壤含水率呈负相关,幼苗期达显著负相关;两种处理下,各作物季CH_4和N_2O的排放与土壤温度的相关性均很小.研究表明,地膜覆盖影响作物各生育期内CH_4和N_2O的排放规律,改变了作物各生育期内2种气体排放占全季排放量的比例,促进了稻-油轮作农田CH_4和N_2O的排放.在100 a时间尺度上,覆膜处理下全年排放的CH_4和N_2O所引起的综合GWP(CO_2量)为4 213.00 kg·hm~(-2),较常规处理3 454.17 kg·hm~(-2)提高了22.0%,表明覆膜不是一种有效的碳减排措施.