Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.     

Effects of Starch Moisture on Properties of Wheat Starch/Poly(Lactic Acid) Blend Containing Methylenediphenyl Diisocyanate

Methylenediphenyl diisocyanate was found to improve the interfacial interaction between poly(lactic acid)(PLA) and granular starch. The objective of this research was to study the effect of starch moisture content on the interfacial interaction of an equal-weight blend of wheat starch and PLA containing 0.5% methylenediphenyl diisocyanate by weight. Starch moisture (10% to 20%) had a negative effect on the interfacial binding between starch and PLA. The tensile strength and elongation of the blend both decreased as starch moisture content increased. At 20% moisture level, the starch granules embedded in the PLA matrix were observed to be swollen, resulting in poor strength properties and high water absorption by the blend.     

Year-round observation of atmospheric inorganic aerosols in urban Beijing: Size distribution, source analysis, and reduction mechanism

To investigate particle characteristics and find an effective measure to control severe particle pollution, year-round observation of size-segregated inorganic aerosols was conducted in Beijing from January to December, 2016. The sampled atmospheric particles all presented bimodal size distribution at four pollution levels (clear, slight pollution, moderate pollution and severe pollution), and peak values appeared at the size range of 0.7-2.1 μm and >9.0 μm, respectively. As dominant particle compositions, NO₃⁻, SO₄²⁻, and NH₄⁺ in four pollution levels all showed significant peaks in fine mode, especially at the size range of 1.1-2.1 μm. Secondary inorganic aerosols accounted for about 67.6% (36.3% (secondary sulfates) + 31.3% (secondary nitrates)) of the total sources of fine particles in urban Beijing. Severe pollution of fine particles was mainly caused by the air masses transported from nearby western and southern areas, which are industrial and densely populated region, respectively. Sensitivity tests further revealed that the control measures focusing on ammonium emission reduction was the most effective for particle pollution mitigation, and fine particles all showed nonlinear responses after reducing ammonium, nitrate, and sulfate concentrations, with the fitting curves of y = -120.8x - 306.1x² + 290.2x³, y = -43.5x - 67.8x², and y = -25.8x - 110.4x² + 7.6x³, respectively (y and x present fine particle mass variation (μg/m³) and concentration reduction ratio (CRR)/100 (dimensionless)). Overall, our study presents useful information for understanding the characteristics of atmospheric inorganic aerosols in urban Beijing, as well as offers policy makers with effective measure for mitigating particle pollution.     

Duct-venting of dust explosions in a 20 L sphere at elevated static activation overpressures

Ducts are often recommended in the design of dust explosion venting in order to discharge materials to safe locations. However, the maximum reduced overpressure increases in a duct-vented vessel rather than in a simply vented vessel. This needs to be studied further for understanding the duct-venting mechanism. Numerous duct-vented dust explosion experiments were conducted, using a 20 L spherical chamber at elevated static activation overpressures, ranging from 1.8 bar to 6 bar. Duct diameters of 15 mm and 28 mm, and duct lengths of 0 m (simply venting), 1 m and 2 m, were selected. Explosion pressures both in the vessel and in the duct were recorded by pressure sensors, with a frequency of 5 kHz. Flame signals in the duct were also obtained by phototransistors. Results indicate that the secondary explosion occurring in the duct increases the maximum reduced overpressure in the vessel. The secondary explosion is greatly affected by the duct diameter and static activation overpressure, and hence influences the amplification of the maximum reduced overpressure. Larger static activation overpressure decreases the severity of the secondary explosion, and hence decreases the increment in the maximum reduced overpressure. The secondary pressure peak is more obvious as the pressure accumulation is easier in a duct with a smaller diameter. However, the increment of the maximum reduced overpressure is smaller because blockage effect, flame front distortion, and turbulent mixing due to secondary explosion are weaker in a narrow duct. The influence of duct length on the maximum reduced overpressure is small at elevated static activation overpressures, ranging from 1.8 bar to 6 bar at 15 mm and 28 mm duct diameters.     

四川沐川—马边（1994—12—30）5.5级地震山地灾害类型研究

地震诱发的次生山地灾害类型包括：崩塌、滚石、滑坡和重力地裂缝。其规模为中、小型，但类型较多，分布密集，造成不同程度危害。按照危险性区划，震区可划分为高、中、低三种山地灾害危险度区域。各区域面积为：ＵＤ＝９．４ｋｍ＾２；ＭＤ＝２５．９ｋｍ＾２；ＬＤ＝４０．４ｋｍ＾２。斜坡可分为梯状破坏模型：①Ｒｃ崩塌、滚石阶梯；②Ｌｄ滑坡阶梯；③Ｇｆ重力地裂缝阶梯。     

Bioabsorbable Soy Protein Plastic Composites: Effect of Polyphosphate Fillers on Biodegradability

The use of biodegradable polymers made from renewable agricultural products such as soy protein isolate has been limited by the tendency of these materials to absorb moisture. A straightforward approach for controlling the inherent water absorbency of the biodegradable polymers involves blending special bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter in a high-shear mixer followed by compression molding. The procedure yields a relatively water-resistant, biodegradable soy protein polymer composite, as previously reported. The aim of the present study is to determine the biodegradability of the new polyphosphate filler/soy protein plastic composites by monitoring the carbon dioxide released over a period of 120 days. The results suggest that the composites biodegrade satisfactorily, with the fillers having no significant effect on the depolymerization and mineralization of the soy protein plastic, processes that would otherwise result in nonbiodegradable composites. Further, the results indicate that the biodegradation and useful service life of these biocomposites may be controlled by changing the filler concentration, making the biocomposites useful in applications in which the control of water resistance and biodegradation is critical.     

Conflicting perspectives of forest management in Bastar, Central India

This article enters the debate on shifting cultivation and tropical forests, and the role of the State forest departments in managing these regions. The article focuses on the adivasi (indigenous) people and their use of forests in the Bastar region of Madhya Pradesh in Central India. It examines the different landscapes, resulting from human interaction, in order to observe the vegetative changes and progressions in their characteristics; in particular, the author challenges the view that adivasi forest use has been detrimental to the ecology of the forest. A botanical comparison is made between three sites that allow us to note specific characteristics of a fallow, a secondary forest and a primary sal (Shorea robusta) forest. The wider aspects of the adivasi manner of forest use are also discussed.
A major portion of the Bastar region is legally under the authority of the Madhya Pradesh State Forest Department. However, the official policies and laws, pertaining to the conservation of forests and the generation of revenue, are often insensitive to the adivasi perceptions and use of the various vegetative zones within the forest. The effect of a standardised form of demarcation, coupled with the State legislation, has overlooked the adivasi people's needs and their ecologically sound way of relating to the forest. The paper concludes with a few recommendations.     

Desulfurization of coke oven gas from the coking of coking coal blended with a sorbent and waste plastic

A new way to implement the simultaneous reutilization of solid waste, the desulfurization of coke oven gas (COG), and even the desulfurization of coke by the co-coking of coking coal (CC) and waste plastic (WP) blended with a sorbent is proposed; the evolution of H₂S and the removal efficiency of H₂S from COG during the co-coking process were investigated in a lab-scale cylindrical reactor. The experimental results indicated that for the coking of CC blended with ZnO, Fe₂O₃, or blast furnace dust (BFD) as a sorbent, the instantaneous concentration of H₂S in COG was lower than 500 mg/m³ (which meets the technical specification requirement of the Chinese Cleaner Production Standard–Coking Industry, HJ/T 126-2003) when the molar ratio between the key component of the sorbent and the volatile S in CC or the CC/WP blend, n _Zn+Fe/n _S, was about 1.2 for ZnO and Fe₂O₃, but not for BFD under the same conditions, suggesting that ZnO and Fe₂O₃ are promising sorbents, but that BFD must be treated chemical or thermally before being used as a sorbent because of the size and complicated nature of the influence of its phase/chemical composition on its desulfurization ability. However, for the co-coking of CC and WP blended with ZnO as a sorbent, n _Zn+Fe/n _S must increase to 1.4 and 1.7 for 100/2 and 100/5 blends of CC/WP, respectively, to ensure a satisfactory efficiency for H₂S removal from COG. Part of this paper was presented at the International Symposium on EcoTopia Science 2005 (ISET05), Aug 8–9, 2005, Chikusa-ku, Nagoya, Japan     

Influence of haze pollution on water-soluble chemical species in PM2.5 and size-resolved particles at an urban site during fall

To investigate the influence of haze on the chemical composition and formation processes of ambient aerosol particles,PM_(2.5) and size-segregated aerosol particles were collected daily during fall at an urban site of Gwangju,Korea.During the study period,the total concentration of secondary ionic species(SIS) contributed an average of 43.9% to the PM_(2.5) ,whereas the contribution of SIS to the PM_(2.5) during the haze period was 62.3%.The NO_3 and SO~(2-)_4 concentrations in PM_(2.5) during the haze period were highly elevated,being 13.4 and 5.0 times higher than those during non-haze period,respectively.The PM,NO~-_3,SO~(2-)_4,oxalate,water-soluble organic carbon(WSOC),and humic-like substances(HULIS) had tri-modal size distributions peaks at 0.32,1.0,and 5.2 μm during the non-haze and haze periods.However,during the non-haze period they exhibited dominant size distributions at the condensation mode peaking at 0.32 μm,while on October 21 when the heaviest haze event occurred,they had predominant droplet mode size distributions peaking at 1.00 μm.Moreover,strong correlations of WSOC and HULIS with SO~(2-)_4,oxalate,and K+at particle sizes of 1.8 μm indicate that secondary processes and emissions from biomass burning could be responsible for WSOC and HULIS formations.It was found that the factors affecting haze formation could be the local stable synoptic conditions,including the weak surface winds and high surface pressures,the long-range transportation of haze from eastern China and upwind regions of the Korean peninsula,as well as the locally emitted and produced aerosol particles.     

Roles of semivolatile and intermediate-volatility organic compounds in secondary organic aerosol formation and its implication: A review

Secondary organic aerosol(SOA) is a very important component of fine particulate matter(PM_2.5) in the atmosphere. However, the simulations of SOA, which could help to elucidate the detailed mechanism of SOA formation and quantify the roles of various precursors, remains unsatisfactory, as SOA levels are frequently underestimated. It has been found that the performance of SOA formation models can be significantly improved by incorporating the emission and evolution of semivolatile and ...