Distribution and transport characteristics of fine particulate matter in beijing with mobile lidar measurements from 2015 to 2018

Accurately quantifying the concentration and transport flux of atmospheric fine particulate matter(PM_2.5) is vital when attempting to thoroughly identify the pollution formation mechanism.In this study,the mobile lidar measurements in Beijing on heavily polluted days in December from 2015 to 2018 are presented.The lidar was mounted on a vehicle,which could perform measurements along designated routes.On the basis of mobile lidar measurements along closed circuits of the 6 th Ring Road...     

大宝山矿区水体中重金属的行为研究

广东大宝山矿区矿山废水的排放使周边生态环境遭受了严重的破坏。水体中重金属Cu、Zn、Cd和Pb的溶解态浓度分别达到13.82、50.83、0.103和2.91 mg.L-1。Cu、Zn、Cd和Pb的溶解态和悬浮态含量沿河流主干道断面呈相似的空间分布规律,上游都是沿水流方向降低,下游因吸附于悬浮物中的重金属重新释放略有增加。悬浮物中重金属元素的化学形态提取和扫描电镜能谱分析(SEM/EDAX)表明:4种重金属元素都以残渣态为主要存在形态,其次为可还原态,个别断面的Cd可还原态甚至超过了残渣态的含量,说明该水体这4种元素对环境都有一定的潜在威胁性。     

Uptake of cadmium into cells in culture∗

Cadmium has been recognized as pollutant of the environment for many years and numerous studies on its toxic effects have been carried out. Little, however, is known about its metabolic behaviour e.g. why the metal is accumulated so extremely rapidly into the organs of men and animals. Since the study of the individual metabolic steps is very difficult in vivo cell cultures may be used to obtain first indications of what happens in the whole animal.

We used CHO cells in monolayer culture to study the conditions under which the uptake of cadmium occurs. From serumfree medium the metal is accumulated rapidly in the cells. The uptake is inhibited very strongly by the presence of serum or albumin. Accumulation occurs against a concentration gradient and is dependent on the incubation temperature. Below 10°C no cadmium uptake is seen. Several substances which are known to affect cell metabolism have been used to influence cadmium accumulation. Neither inhibitors of energy production nor microtubule or microfilament disruptors showed any substantial effect. In contrast SH‐group blocking agents markedly reduced cadmium uptake.

The results show that cadmium uptake does not occur by passive diffusion but by some active mechanism.     

Interacting Effects of Translocation,Artificial Propagation,and Environmental Conditions on the Marine Survival of Chinook Salmon from the Columbia River,Washington, U.S.A.

Abstract: Captive rearing and translocation are often used concurrently for species conservation, yet the effects of these practices can interact and lead to unintended outcomes that may undermine species’ recovery efforts. Controls in translocation or artificial‐propagation programs are uncommon; thus, there have been few studies on the interacting effects of these actions and environmental conditions on survival. The Columbia River basin, which drains 668,000 km² of the western United States and Canada, has an extensive network of hydroelectric and other dams, which impede and slow migration of anadromous Pacific salmon (Oncorhynchus spp.) and can increase mortality rates. To mitigate for hydrosystem‐induced mortality during juvenile downriver migration, tens of millions of hatchery fish are released each year and a subset of wild‐ and hatchery‐origin juveniles are translocated downstream beyond the hydropower system. We considered how the results of these practices interact with marine environmental conditions to affect the marine survival of Chinook salmon (O. tshawytscha). We analyzed data from more than 1 million individually tagged fish from 1998 through 2006 to evaluate the probability of an individual fish returning as an adult relative to its rearing (hatchery vs. wild) and translocation histories (translocated vs. in‐river migrating fish that traveled downriver through the hydropower system) and a suite of environmental variables. Except during select periods of very low river flow, marine survival of wild translocated fish was approximately two‐thirds less than survival of wild in‐river migrating fish. For hatchery fish, however, survival was roughly two times higher for translocated fish than for in‐river migrants. Competition and predator aggregation negatively affected marine survival, and the magnitude of survival depended on rearing and translocation histories and biological and physical conditions encountered during their first few weeks of residence in the ocean. Our results highlight the importance of considering the interacting effects of translocation, artificial propagation, and environmental variables on the long‐term viability of species.     

A device for sampling the mud‐water interface in eutrophic lakes and bogs for residue analysis

Abstract

A tubular device has been developed making it possible to obtain layered samples of loosely aggregated, flocculent material from bogs or eutrophic lakes. The samples are up to 50 cm long and 15 cm in diameter. The sampler is free from protuberances and intact, layered samples can be taken. The tubular part of the sampler is about 85 em long, the walls of the lower 25‐cm portion harbouring a pneumatic closing mechanism which is controlled from above the water surface. An extendible handle for manipulating the sampler and for guiding it into place, is fastened to the upper end of the sampling tube. The performance and the operation of the sampler in the field are described.     

APPLICATION OF ENHANCED ANNEALING TO GROUND WATER REMEDIATION DESIGN1

ABSTRACT: A methodology for ground water remediation design has been developed that interfaces ground water simulation models with an enhanced annealing optimizer. The ground water flow and transport simulators provide the ability to consider site‐specific contamination and geohydrologic conditions directly in the assessment of alternative remediation system designs. The optimizer facilitates analysis of tradeoffs between technical, environmental, regulatory, and financial risks for alternative design and operation scenarios. A ground water management model using an optimization method referred to as “enhanced annealing” (simulated annealing enhanced to include “directional search” and “memory” mechanisms) has been developed and successfully applied to an actual restoration problem. The demonstration site is the contaminated unconfined aquifer referred to as N‐Springs located at Han‐ford, Washington. Results of the demonstration show the potential for improving groundwater restoration system performance while reducing overall system cost.     

Sorption and desorption kinetics of diuron,fluometuron, prometryn and pyrithiobac sodium in soils

Abstract

The sorption and desorption characteristics of four herbicides (diuron, fluometuron, prometryn and pyrithiobac‐sodium) in three different cotton growing soils of Australia was investigated. Kinetics and equilibrium sorption and desorption isotherms were determined using the batch equilibrium technique. Sorption was rapid (> 80% in 2 h) and sorption equilibrium was achieved within a short period of time (ca 4 h) for all herbicides. Sorption isotherms of the four herbicides were described by Freundlich equation with an r² value > 0.98. The herbicide sorption as measured by the distribution coefficient (K_d) values ranged from 3.24 to 5.71 L/kg for diuron, 0.44 to 1.13 L/kg for fluometuron, 1.78 to 6.04 L/kg for prometryn and 0.22 to 0.59 L/kg for pyrithiobac‐sodium. Sorption of herbicides was higher in the Moree soil than in Narrabri and Wee Waa soils. When the K_d values were normalised to organic carbon content of the soils (K_oC), it suggested that the affinity of the herbicides to the organic carbon increased in the order: pyrithiobac‐sodium < fluometuron < prometryn < diuron. The desorption isotherms were also adequately described by the Freundlich equation. For desorption, all herbicides exhibited hysteresis and the hysteresis was stronger for highly sorbed herbicides (diuron and prometryn) than the weakly sorbed herbicides (fluometuron and pyrithiobac‐sodium). Hysteresis was also quantified as the percentage of sorbed herbicides which is not released during the desorption step ω = [n_ad / n_de ‐1] x 100). Soil type and initial concentration had significant effect on ω. The effect of sorption and desorption properties of these four herbicides on the off‐site transport to contaminate surface and groundwater are also discussed in this paper.     

EXPOSURE ASSESSMENT OF POPULATIONS USING ENVIRONMENTAL MODELING,DEMOGRAPHIC ANALYSIS,AND GIS1

ABSTRACT: Simulation of ground-water flow and fate of contaminants in the subsurface environment constitutes a major phase of most environmental assessment and site remediation studies. These simulation studies yield information on spatial and temporal distributions of contaminants in the subsurface media. An important use of this information is to conduct exposure assessment studies. Spatial and temporal distributions of both chemical concentrations and exposed populations render this integrated exposure analysis task rather difficult. Geographic Information Systems (GIS), on the other hand, provide a platform in which layered, spatially distributed databases can be manipulated with ease, thereby simplifying exposure analysis tasks significantly. In this paper, we describe procedures that combine the simulation models and demographic databases under a GIS platform to automate the exposure assessment phase of a typical health assessment study. Procedures developed herein significantly simplify the post-processing phase of the analysis, and render the overall task more ‘user friendly.’ A site-specific application is included as a demonstration of the proposed process.     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

VARIABILITY IN MEASURED BEDLO AD-TRANSPORT RATES1

ABSTRACT: Variability in bedload-transport rates during constant water discharge is an inherent part of the bedload-transport process. Although this variability has been measured extensively in the laboratory, similar information generally is not available from field measurements. During a four-day period of nearly constant water discharge, four sets of consecutively collected bedload samples, ranging from 43 to 120 samples, were obtained at the same cross channel location using a standard 65-pound Helley-Smith bedload sampler. When the measured transport rates are converted to dimensionless rates and plotted as cumulative frequency distributions, they show good agreement with a theoretical probability distribution function of rates derived for the case of ripples on dunes. The distributions show that during constant water discharge individual measured rates at a fixed point vary from near zero to four times the mean rate, and 60 percent of the sampled rates will be less than the mean. Because of the large variation in transport rates that occurs at every location in the cross section, many observations are required to establish an accurate estimate of the mean rate at any given location.