Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

Large-scale mercury variations in Lake Vänern (Sweden) 1974-98

Lake V?nern, the largest lake in Sweden, has been seriously contaminated with mercury during the 20th century. In the 1970's and 80's the direct load, mainly from a chlor-alkali industry in the area, of mercury was drastically reduced as a response to new legislation, from three to five tons down to between five and ten kg yr(-1). Large amounts of the disposed pollutant have accumulated in the sediments. The question posed in this work is now, is the effect of the drastic load reduction after more than two decades visible in the sediments? The question is relevant as large areas still are blacklisted for fishing, but also as a follow-up of a major remedy action. The lake also serves as a freshwater reservoir for even Sweden's second largest city. This work synthesises and compares data of mercury in the sediments from three major field programs, in 1974, 1984 and 1998. The interest is focused on both spatial heterogeneity and temporal trends. In 1974, the surface concentrations are significantly higher than in subsequent surveys. Significant differences are also found between 1984 and 1998. Significant spatial differences within the lake are found for respective year. The most contaminated area is located in the north, close to the major point source (a former chlor-alkali industry). This is also the area with the largest improvement, as a direct response to the reduction in load. Further from the outlet, the recovery is more affected by burial and transport processes out into the deeper basins.     

应用模糊综合指数法对伊犁河（伊宁段）水质的综合评价

模糊数学法对伊犁河(伊宁段)水质进行综合评价时,由于分别采用地面水环境质量标准中五类标准值的平均值及其中三个标准值,计算后的结果不一致,而模糊综合指数法避免了这类问题的出现,计算结果比较满意.从而表明,该法是对模糊数学法的进一步改进.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

入海河流对近岸海域海湾影响分析

利用污染指数法及相关系数法对盘锦市境内的河、海水质进行对比分析，从而得出近岸海域海湾水质主要受入海河流水质影响的结论。     

烃类化合物气相色谱保留指数与其分配系数关系研究

报道了从烃类化合物气相色谱保留指数预测其正辛醇水分配系数的公式，研究了以不同极性相上测得的烃类化合物保留指数预测其分配系数的准确性，得出弱极性柱上测得的化合物保留指数能更准确的预测其分配系数，从而为烃类化合物分配系数的测定和预测提供了一种简便易行的新方法。     

综合福利视角下中国生态文明建设绩效评价及国际比较

基于强可持续研究范式,以生态经济学和可持续发展理论为基础,运用两阶段网络Super-EBM模型进行绩效测算和评价,打开生态福利转化过程的“黑箱”,基于综合福利视角将生态文明建设绩效进一步分解为生态经济效率和经济福利效率,实证研究部分选取2006-2015年的时间序列数据对中国“十一五”和“十二五”期间的生态文明建设绩效水平进行纵向分析,与此同时,选取42个国家2014年的截面数据进行横向的国际对比研究。研究表明：（1）“十一五”到“十二五”期间,中国生态文明建设绩效（0.986）整体水平一般,均未实现DEA有效,但“十二五”期间已呈现出逐年改善的利好趋势。国际比较层面,瑞士（1.647）、印度尼西亚（1.365）、爱尔兰（1.039）依次排名前三位,中国（0.297）排名相对靠后,位列倒数第二。各国之间差异较大,总体上呈现出“OECD国家（0.677）最高、G20国家（0.611）次之、金砖国家（0.417）最低”的态势。（2）从分阶段效率来看,无论是纵向分析还是横向对比,均发现第一阶段的生态经济效率明显低于第二阶段的经济福利效率,生态经济效率偏低是导致生态文明建设绩效总体水平偏低的主要原因。（3）与传统的单阶段、径向或非径向DEA模型相比,两阶段网络Super-EBM模型综合考虑了径向和松弛变量问题,测算出来的效率值更为精确,能够更为客观地反映现实。同时,对于其他领域涉及两阶段或多阶段生产系统的效率或绩效评估具有较好的借鉴价值。最后,根据上述结论提出相应的政策建议。     

准确测定高锰酸盐指数考核样的方法

根据长期的实际操作经验，要准确测定高锰酸盐指数值，在样品分析中，水浴时间不能少于35min；K值在0．980-1．010；滴定时温度保持在70℃。以提高测定结果的准确度。     

颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．