煤与瓦斯突出的物理模拟和数值模拟研究

利用自行设计的实验装置,通过现场采集具有突出倾向的煤样,分别向实验装置煤样中充入吸附能力较大的CO2和吸附能力较小的N2来模拟不同级别的煤与瓦斯突出现象,物理试验结果表明:瓦斯压力越大,突出强度越大;当瓦斯压力相近时,吸附和解吸能力大的瓦斯突出强度大。通过数值模拟对煤与瓦斯突出进行研究,数值模拟再现了煤矿开采过程中诱发的煤与瓦斯突出全过程,同时验证了煤与瓦斯突出是瓦斯压力、地应力及煤岩体的力学性质综合作用的结果,该验证对进一步深入理解认识煤与瓦斯突出的机理具有重要的理论和实践意义。     

Individual risk analysis of high-pressure natural gas pipelines

Transmission pipelines carrying natural gas are not typically within secure industrial sites, but are routed across land out of the ownership of the pipeline company. If the natural gas is accidentally released and ignited, the hazard distance associated with these pipelines to people and property is known to range from under 20 m for a smaller pipeline at lower pressure to up to over 300 m for a larger pipeline at higher pressure. Therefore, pipeline operators and regulators must address the associated public safety issues.This paper focuses on a method to explicitly calculate the individual risk of a transmission pipeline carrying natural gas. The method is based on reasonable accident scenarios for route planning related to the pipeline's proximity to the surrounding buildings. The minimum proximity distances between the pipeline and buildings are based on the rupture of the pipeline, with the distances chosen to correspond to a radiation level of approximately 32 kW/m². In the design criteria for steel pipelines for high-pressure gas transmission (IGE/TD/1), the minimum building proximity distances for rural areas are located between individual risk values of 10⁻⁵ and 10⁻⁶. Therefore, the risk from a natural gas transmission pipeline is low compared with risk at the building separated minimum distance from chemical industries.     

Damage to offshore oil and gas facilities following hurricanes Katrina and Rita: An overview

Hurricanes Katrina and Rita hit the centre of the American petrochemical industry, shutting down eight refineries, hundreds of oil-drilling and production platforms, and many other industrial facilities. Furthermore, it triggered unprecedented numbers of hazardous-materials releases from industrial facilities and storage terminals onshore, as well as from oil and gas production facilities offshore in the Gulf of Mexico (GoM). In this paper, we analyse the damage caused by the two hurricanes on the offshore oil and gas industry. Hurricanes Katrina and Rita caused the largest number of destroyed and damaged platforms and pipelines, and the highest number of mobile offshore drilling units set adrift in the history of GoM operations. Following the hurricanes, changes have been proposed to operating and emergency procedures, maintenance requirements, and design practices including mooring practices for mobile offshore drilling units.     

Characterization of Organic Compounds in Compost-Amended Soil

Samples of compost-amended soil from waste dumping sites in Lagos Metropolis were extracted with dichloromethane (3 × 20 cm³) and the extract was evaporated at 35 °>C. The residue was extracted with 2,2,4-trimethylpentane, and portions of the solution were applied to a column containing silica gel from which aliphatic and aromatic hydrocarbons were eluted with n-hexane and toluene respectively. Analysis of the n-hexane fraction using gas chromatography showed the presence of a mixture of aliphatic hydrocarbons, ranging from C₉ to C₂₅, while ultraviolet analysis of the toluene fraction suggested 1,2-benzanthracene; 2,3-benzphenanthrene, chrysene and pyrene as polyaromatic compounds present in samples analyzed. The crude extracts were highly coloured and viscous. Total extractable organic residues in the 2,2,4-trimethylpentane extracts ranged from 36 to 89 mg g^-1 of soil.     

生物过滤技术在大气污染控制中的应用

生物过滤是控制大气污染的经济有效技术,具有较好的发展前景。本文介绍了生物过滤技术处理废气的研究,应用历史,现状,和生物过滤理论,分析了工艺的使用范围,设计及运行控制要点,列举了应用的范例。     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

单甲脒饱和蒸气压的测定和估算

用气体的法测单甲脒在１５,２５,３５和４５℃时的饱和蒸气分别为０．２０２,０．５５４６,１．９５,６．２９Ｐａ;亨利常数计算值分别为６．３０×１０＾－４,１．６７×１０＾－３,５．６８×１０＾０－３和１．７８×１０＆－２,根据Ｃｌａｕｓｉｕｓ Ｃｌａｐｅｙｒｏｎ方程求出单甲脒在常温下气化热为８９．２ｋＪ．ｍｏｌ＾－１。     

预浓缩与GC-MS联用分析垃圾填埋场恶臭气体

采用预浓缩与气相色谱-质谱联用,建立了垃圾填埋场几种恶臭气体的分析方法。该法用SUMMA罐采集垃圾填埋场臭气,经预浓缩系统冷凝浓缩后,用GC-MS分析测定。几种臭气的检出限均低于3.0×10-3mg/m3,经6次重复测定,其相对标准偏差低于10%。该法已用于西安市江村沟垃圾填埋场臭气的采样分析。该法的应用增强了西安市对臭气的监测分析能力。     

趋势分析法评价苯系物标准气体的时间稳定性

根据GB/T 15000.3—2008设计了苯系物标准气体的时间稳定性研究方案,制备了4瓶苯系物标准气体,随着时间的推移进行测定并将结果制图,结果显示量值随时间没有显著的变化趋势。以线性关系为模型,计算线性直线的斜率和斜率的标准偏差,用t检验判断斜率是否显著来评价标准气体的稳定性。计算结果显示,所有斜率均不显著,因此该研究制备的苯系物标准气体能够稳定保存22个月。根据时间稳定性数据计算由不稳定性引起的不确定度,并讨论了这种计算不稳定性引起不确定度的方法对结果有放大的可能性。     

顶空气相色谱法在测定水中三氯乙醛的应用

研究以DB-624交联石英毛细管柱分离,微电子捕获检测器-顶空气相色谱法测定水中三氯乙醛的应用,与以往的方法相比,准确可靠、省工省时省试剂,符合"绿色分析化学"的要求。最低检出限为0.2μg/L,标准偏差为0.028μg/L,相对标准偏差为6.0%,加标回收率为88.7%～109%。