Adsorption,desorption, soil mobility,aqueous persistence and octanol‐water partitioning coefficients of terbufos,terbufos sulfoxide and terbufos sulfone

Abstract

Terbufos, t. sulfoxide and t. sulfone (5 μg ml^‐1) were incubated in natural, sterilized natural and distilled water, with initial pH values of 8.8, 8.8 and 6.0, respectively, at 20°C. First‐order disappearance was observed for the three compounds. Rates in natural and sterilized water were similar indicating chemical degradation predominated. Terbufos disappeared rapidly (t½>=3 days) in all systems. T. sulfoxide and t. sulfone were more persistent in the natural (t½>=18–40 days) and distilled water (t½>=280–350 days). Adsorption data for the three compounds in four soil‐water systems showed the decreasing order of adsorption to be terbufos>>t. sulfoxide=t. sulfone. Desorption from soils fortified at 5 μg g^‐1 with water was examined for 4 successive 18‐hr cycles. T. sulfoxide and t. sulfone were totally desorbed; terbufos was too unstable to study. The mobility of the compound in soil eluted with water was in the order, t. sulfoxide=t. sulfone>> terbufos, in agreement with adsorption‐desorption results. The octanol‐water partitioning coefficients for terbufos, t. sulfoxide and t. sulfone, at 23°C, were 3:30 x 10 , 164, and 302, respectively.     

温度和pH值对重组杆状病毒(AcMNPV-BmKIT-Chi)的毒力影响

研究了温度、酸碱度对重组杆状病毒(AcMNPV-BmKIT-Chi)毒力的影响.结果显示,多角体病毒在温度4~50℃,pH6.0~8.0范围内可以保持较高的毒力稳定性;不同虫龄棉铃虫幼虫对重组病毒的毒力敏感性差异显著,低虫龄对重组核型多角体病毒更为敏感;病毒对幼虫存在亚致死作用,饲毒组与对照组幼虫体重差异显著.图3表3参13     

Adsorption of basic dyes onto MCM-41

The adsorption of two basic dyes, Basic Green 5 (BG5) and Basic Violet 10 (BV10), onto MCM-41 was studied to examine the possible effect of interactions between large adsorbates and MCM-41 on the pore structure stability of MCM-41 and the potential of MCM-41 for the removal of basic dyes from wastewater. The revolutions of surface characteristics and pore structure of MCM-41 induced by dyes adsorption were characterized based on the analyses of the nitrogen isotherms, the XRD patterns, and the FTIR spectra. It was experimentally concluded that when the effect of interactions between large dyes (such as BV10) and MCM-41 on the pore structure stability of MCM-41 was insignificant, MCM-41 might be a good adsorbent for the removal of basic dyes from wastewater. The adsorption of BV10 on MCM-41 with respect to contact time, pH, and temperature was then measured to provide more information about the adsorption characteristics of MCM-41. Both Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the pseudo-second-order kinetic model was used to describe the kinetic data, from which some adsorption thermodynamic parameters were also evaluated.     

A review on transient stability of DFIG integrated power system

With the increasing penetration of doubly fed induction generators (DFIGs), the impact of the DFIG on transient stability attracts great attention. Transient stability is largely dominated by generator types in the power system, and the dynamic characteristics of DFIG wind turbines are different from that of the synchronous generators in the conventional power plants. The analysis of the transient stability on DFIG integrated power systems has become a very important issue. This paper reviews the current research on the issue from two aspects. One is to describe the methods to improve the fault ride through capability of DFIG wind turbines and the other is to analyse the impact of the DFIG wind farm on transient stability of power systems.     

Handgrip and Box Tilting Strategies in Handling: Effect on Stability and Trunk and Knee Efforts

The purpose of this study was to evaluate the effect of four handgrip/box tilting strategies (right, left, backward, and no tilt of the box) on trunk and knee efforts, body posture, and the stability of 14 participants with limited experience in handling. The tasks consisted of transferring a low-lying box placed in front of the participant to a shelf of the same height at the participant’s left. It was hypothesized that tilting the box could reduce trunk and knee efforts as well as body asymmetry and improve stability. A tridimensional dynamic rigid body model was used to estimate the triaxial net muscular moment magnitudes at the trunk (L5/SI) and at the knees. An approach to quantify the participants’ dynamic stability was also included. Finally, five angles were computed to characterize body asymmetries. The results showed that tilting the box affected specific trunk efforts, but did not succeed in reducing trunk asymmetric efforts. However, the tilts were executed in a single direction, and it may be possible that combined tilts of the box could help reduce trunk asymmetric efforts. Tilting the box had little effect on knee loadings, and the left tilt strategy reduced participants’ stability. This study showed the importance of considering the position of the box when assessing the risks encountered in asymmetrical handling.     

Effects of ferric oxide on decompositions of methyl ethyl ketone peroxide

Methyl ethyl ketone peroxide (MEKPO) is a widely used initiator for polymerization reaction and hardener in glass-reinforced plastic. However, MEKPO is an unstable reactive chemical and has caused several serious accidents all over the world. This work studied the thermal stability of MEKPO in the presence of ferric oxide as the contaminant through calorimetric and kinetic studies. The calorimetry was performed using Automatic Pressure Tracking Adiabatic Calorimeter (APTAC) to identify the effects of ferric oxide (different concentration) on important reactive hazards such as onset temperature and pressure hazard. Kinetic modeling was then performed to study the kinetics of the runaway reaction and estimate important kinetic parameters. The results indicate that in the low concentration range (<0.3%), ferric oxide has no significant effect on the thermal stability of MEKPO. However, in the high and intermediate concentration range of ferric oxide (i.e., 10%), the negative effect on the thermal stability of MEKPO was observed. This result is in agreement with the kinetic study result that the activation energy and frequency factor decrease dramatically in the high ferric oxide concentration range. The results provide necessary process safety information for the handling of MEKPO and also technical basis for the further study in this area.     

基于响应面法和强度折减法的边坡可靠性计算研究

针对边坡安全系数是隐式函数的特点,提出将有限差分强度折减法和响应面法(RSM)相结合,分析边坡可靠性的方法。采用安全系数、破坏概率及对应的临界滑动面等,作为综合评价边坡稳定性的指标。算例验证表明,笔者提出的计算方法所得结果与其他方法比较接近,且更能反映边坡真实的工作状态。对某钢铁基地工程的昔格达组地层边坡,采用新的计算方法进行可靠度分析,对比研究确定性破坏模式和概率破坏模式中剪应变增量和破坏区的分布。研究结果表明,均值强度较高的边坡岩土体,如果变异系数较大,便仍处于较高风险水平,虽然边坡整体的安全系数满足工程要求;均值安全系数和最小可靠度指标对应的破坏模式也是有差别的。     

基于模糊-理想点法的海下采场顶板稳定性分析

为准确评价复杂地质条件下海下采场顶板的稳定性,提出将模糊数学中的隶属度与理想点法相结合的模型。针对海下采场的特殊地质条件,综合考虑水文地质因素、工程地质因素、采场结构因素以及其他因素4个方面,选取9个评价指标。通过对指标进行隶属度化处理,由变异系数法确定指标权重,建立顶板分级模型。最后,根据三山岛金矿5个采场现场调查以及室内试验获得的指标数据,应用该模型对顶板稳定级别进行评判。结果表明,该模型的评判等级结果与工程实际相符,从而验证模型可用于海下采场顶板的稳定性分析。     

大孤山铁矿边坡爆破损伤分区研究

露天矿生产爆破,特别是靠帮爆破在边坡中形成的爆破损伤区对其稳定性具有很大的影响。本文针对大孤山铁矿露天爆破开采的实际情况,建立了极限平衡数值分析模型及峰值速度衰减公式。利用数值分析软件Geoslope对边坡靠帮爆破过程中岩体损伤范围进行了研究,主要分析了在爆破-200--212m水平时,爆破震动对边坡岩体的影响,并利用萨道夫斯基公式和PPV安全判据对爆区周围岩体损伤范围进行了计算。结果表明距离炮孔6.2m以内范围为完全破碎区,6.2-12.4m为岩体重度损伤区,12.4-19.7m为轻微损伤区。数值分析表明距爆源同一距离的岩体质点峰值速度随深度的增加而减小,爆破区周围震动波速成漏斗形分布,同实际爆破情况吻合。