地震作用下结构失稳诱发的塌陷和地裂缝机理分析

分析了地震诱发的地表塌陷和地裂缝机制。通过地裂缝微观机理分析研究发现:(1)地震造成了大量的地裂缝和塌陷,这些破坏的出现与地震发生时造成的瞬间应力变化和结构破坏密切相关;(2)利用结构突变失稳理论来研究岩土体内部结构是可行的。当应力状态满足孔隙结构失稳判别式时,结构元的变形状态将产生一个“跳跃”;(3)地震情况下岩土体颗粒之间有效接触力的增加,使得结构的变形能增大;同时导致颗粒间连接刚度的降低,导致结构的失稳,这些变化又是在瞬间发生和完成的,这就造成了在地震发生时总是伴随着大量的裂缝和塌陷的出现。     

岩溶地基土洞塌陷评价及处理

地下水(地表水)产生的渗透潜蚀作用、崩解作用等是土洞形成和发展的重要原因。对工程实例中的土洞,采用极限平衡法和压力拱分析法进行了稳定性判别。在土洞中充填砼,然后采用压力灌浆,灌浆所采用的水灰比为1∶1~1∶1.5,灌浆压力一般为0.15~0.30 MPa,地基处理效果好。     

Structural-temporal organization of a rodent community in the Teletskaya Taiga,Altai Mountains

The structural-temporal organization of a murine rodent community in the taiga has been studied near Lake Teletskoe, Mountain Altai. The results show that the long-term dynamics of indices characterizing community diversity depend mainly on changes in the structure of dominance rather than on the population dynamics of species. The distribution of species in the factor space corresponds to their preference for certain biotopes, from dry to relatively moist. An analysis of relationships within the rodent community has revealed the synchronous dynamics of species abundance and antiphase pattern of changes in the structural indices of dominant species.     

确定岩体斜坡滑动面抗剪强度的动态反分析方法

滑动结构面的抗剪强度在岩体滑坡的稳定性计算中是最重要的参数,也是最难以确定的。基于岩体抗剪强度是多种因素影响下的随机变量这一认识前提下,本文以西柏坡“中共中央解放军总部”旧址滑坡为例提出了确定岩体斜坡滑动面抗剪强度的动态反分析方法,并对该方法获得的抗剪强度的实用性进行了分析。结果表明,反分析方法是获得岩体斜坡滑动面抗剪强度的最经济、合理的途径。     

内排压脚与边坡稳定性的关系

为了研究边坡角及边坡形状与边坡稳定性的关系,采用有限元软件ANSYS模拟了不同边坡角对应的稳定系数,以及不同平盘宽度和压脚高度所形成的等储备强度边坡的稳定系数。模拟中假设材料符合相关联的理想弹塑性本构关系,强度准则符合Drucker-Prager准则,用计算收敛性作为边坡稳定性的准则,用强度折减法得出边坡的稳定系数。为了形成等储备强度边坡,由下到上分步骤进行压脚。先在平面边坡最下台阶压脚,这样提高了边坡稳定系数,在边坡进入临界状态时,最下两台阶的塑性状态相同,则压脚停止;再在最下两台阶同时压脚,在边坡进入临界状态时,最下3个台阶的塑性状态相同,则压脚停止;以此类推,在最下边n个台阶同时压脚,在边坡进入临界状态时,压到与第n+1个台阶的塑性状态相同为止。结果表明,边坡总是从坡脚开始形成塑性区,在重力加载过程中,塑性区以弧形条带向坡顶扩展,形成滑带。最有效的内排压脚是从最下台阶开始形成等储备强度边坡的压脚。     

围岩稳定性评价的改进物元可拓模型与应用

为弥补现有地下工程围岩稳定性评价方法的不足,建立了改进的物元可拓模型。通过构造一种新的关联函数,解决了因传统的物元可拓模型的关联函数是一个分段函数而存在的不便于计算的缺陷,以及评价指标间的互不相容性问题,拓宽了物元可拓法的应用范围。将改进的物元可拓模型应用于某地下工程围岩的稳定性评价,结果表明,样本1、2、5属于Ⅱ级(较稳定),样本3、4属于Ⅰ级(稳定)。通过将其评价结果与传统可拓法及模糊数学综合评判结果进行比较分析,证明该评价方法的正确性。研究表明,改进的物元可拓模型的评价结果与实际工程地质情况更为吻合,准确度更高,能够反映各因素对围岩稳定性的影响,其合理性和可行性得到了验证。     

Effect of urea on detonation characteristics and thermal stability of ammonium nitrate

A study has examined the effect of urea on the thermal stability and detonation characteristics of ammonium nitrate (AN). The thermal decomposition temperature and surface morphology of samples were investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). For further research on the thermal sensitivity and shock sensitivity of the samples, the Koenen test and UN gap test were conducted. The results indicate that urea can substantially increase the thermal stability of AN (the greatest exothermic peak is increased by more than 100 °C) and reduce the thermal sensitivity of AN. However, AN-50wt. % urea mixtures can still produce a steady detonation in the UN gap test. Urea cannot reduce the ability to propagate a detonation. Possible explanations for these results are discussed.     

Application of a hydroxylamine nitrate stability model to plutonium purification process equipment

A mathematical model that predicts hydroxylamine nitrate (HAN) (NH₂OH·HNO₃) stability is applied to aqueous solutions containing HAN, nitric acid and plutonium that are used in plutonium purification processes. The model estimates the stability of these solutions with respect to the rapid, hazardous, autocatalytic reaction of HAN with nitric acid that generates heat and gas. It also accounts for reaction kinetics, temperature changes, gas generation rates, solution volumes and flow rates, and distribution of plutonium and nitric acid between aqueous and organic phases. The model is applied to three typical process vessels used in solvent extraction purification of plutonium – a countercurrent aqueous/organic plutonium stripping column, an oxidation column used for HAN and hydrazine destruction, and a plutonium rework tank. Both normal and off-normal process scenarios are modeled. Two of the off-normal scenarios lead to the rapid autocatalytic reaction of HAN with nitric acid where heat and gas are generated and that could lead to damage of the process equipment and/or release of hazardous plutonium solution from the vessel. In these two cases, stationary aqueous solutions containing HAN, Pu(III), and nitric acid were allowed to slowly react until conditions for the autocatalytic reaction were reached.     

土壤颗粒对纳米TiO_2悬浮稳定性作用机制的实验研究

在不含表面活性剂和含有表面活性剂两种条件下,研究了土壤颗粒对纳米TiO2(nTiO2)悬浮稳定性的影响.结果表明,土壤颗粒降低了nTiO2在水相中的悬浮稳定性.当体系中不含表面活性剂时,nTiO2在土壤大颗粒上的沉积是导致nTiO2脱稳沉淀的主要原因.在含有表面活性剂的溶液中,土壤颗粒降低nTiO2悬浮稳定性的作用变得更加明显了.一方面,表面活性剂加速了土壤颗粒本身的沉降从而增强了nTiO2在其中的沉降,另一方面,表面活性剂在土壤上的强烈吸附促进了表面活性剂-nTiO2在土壤上的沉积.扫描电镜显示,nTiO2不仅吸附在土壤大颗粒上,还会吸附在土壤小颗粒表面.3种表面活性剂中,十六烷基三甲基溴化铵(CTAB)悬浮的nTiO2与土壤颗粒共沉淀现象最明显.除了土壤对CTAB的吸附作用之外,XDLVO/DLVO能量计算显示CTAB体系中土壤颗粒与nTiO2之间存在显著第二极小值,表明nTiO2能够在第二极小值位置与土壤颗粒结合,从而与土壤颗粒一起快速沉淀.