瑞平塘河氟化物污染状况调查及溯源研究

以2016—2020年地表水常规监测结果为依据,发现瑞平塘河自2017年起出现氟化物质量浓度升高现象,2020年其中1个断面氟化物质量浓度平均值达到1.25 mg/L,比2016年高出145%。为此于2021年3—6月,对瑞平塘河流域的氟化物污染状况进行实地调查并开展溯源研究。研究结果显示,2021年氟化物质量浓度超过1.0 mg/L的点位占59.34%,其中超过1.5 mg/L的点位占42.86%,表明大部分河道氟化物质量浓度已经超过水体功能区要求,对生态环境安全构成较大潜在风险。溯源调查结果表明,排除了农业源及矿山源污染的可能,乳胶制品企业排放的废水为瑞平塘河氟化物的污染来源。针对目前该行业的排放标准和环境影响评价均未提及氟化物污染,企业废水处理设施也无除氟工艺单元,缺乏有效的污染防治措施与监管要求等问题。提出,应及时组织开展该区域乳胶制品行业整治提升,增加氟化物处理工艺单元,提升出水水质,确定氟化物排放浓度限值,并对该行业排放标准做进一步研究和完善等建议。     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

探究城市污水处理项目的环境影响评价

水作为人类赖以生存的主要能源物质,随着社会综合水平的提高,各行业对水资源的需求越是急切。而现阶段城市中大量污水给环境带来很多不利影响,环保公司针对城市污水处理不断在技术上进行突破、完善,将智能化节能技术运用到城市污水处理中,使设备、资源得到充分利用,为人们用水条件带来更加充沛、丰富的保障与支持。为有效处理城市污水,争取在城市污水处理发挥更大作用,带动城市环境可持续发展。     

不同给水管材对管壁附着生物膜铅、镉的解吸动力学研究

给水管壁生物膜会吸附水中的重金属元素积累在管壁生物膜中,在受到扰动时释放回到水体,危害饮用水水质安全。试验以上海管网末梢水为实验对象,研究了PVC、铸铁和紫铜等三种管材上生物膜对铅、镉的解吸特性。结果表明,PVC、铸铁和紫铜附着生物膜对铅的解吸容量qe分别为:5.92211μmol·m^-2、128.3051μmol·m^-2和21.1808,解吸速率常数k分别为:0.001060 m^2·μmol^-1·min^-1、0.000041 m^2·μmol^-1·min^-1和0.000503 m^2·μmol^-1·min^-1,对于镉元素三种材质的解吸容量qe分别为:14.71519μmol·m^-2、18.50481μmol·m^-2和2.25225μmol·m^-2;解吸速率常数k分别为:0.000102 m^2·μmol^-1·min^-1、0.001070 m^2·μmol^-1·min^-1和0.000103 m^2·μmol^-1·min^-1。     

水环境监测信息化新技术的应用分析

随着国民经济的快速发展,我国人民的生活水平和质量也随之而提高,对于生态环境以及居住环境的要求也相应提升。水是万物之源,是保障人们生产生活的基本要素之一,为了有效提升水环境质量,先进的水环境监测技术必不可少。随着科学技术的飞速发展,水环境监测技术也在不断调整和优化,逐渐向信息化方向发展,在生态环境保护工作中发挥着不可替代的作用。本文将详细阐述现阶段我国在水环境监测工作中实施的信息化新技术,希望能为相关研究人员提供参考和借鉴。     

关于城市河流水污染防治技术应用和研究

随着我国经济的不断发展,各种工厂也大量的成立,而这也使得很多废弃物及废水被过度排放到湖泊与河流之中,进而导致其出现了严重的污染问题。污染不仅对人们的生活质量产生了影响,同时也对生态的平衡发展产生了很大的阻碍,业已经成为社会各界高度关注和重视的问题。基于此,本文围绕城市河流水污染的现状进行了分析,对于污染产生的原因也进行了阐述,针对城市河流水污染防治技术的应用也进行了探讨和研究,以期可以有效解决我国出现的河流水污染问题,进而为人们及社会营造一个全新、绿色的河流环境。     

快速城市化背景下的思雅河流域水环境分析

通过对思雅河流域连续3年的水环境质量监测,结合遥感影像获得其土地利用类型变化,据此研究城市化对水环境的影响。结果表明:2012—2014年间思雅河流域自然、农业景观面积占比减少,而建设用地面积持续增加;研究期间除TDS年均值略微下降外,其余水质指标的年均值几乎均呈递增趋势,尤以TSS和COD增加最显著;TSS、COD、NH 3-N和TP的相对标准偏差均>0.1,显著高于其余参数,说明其波动程度较大。主成分分析表明水环境变化最主要的影响因子为第一主成分(TSS、COD、NH 3-N和TP)。贵安新区大学城建设活动加重了思雅河流域水体污染趋势。     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

便携式GC-MS仪快速测定水中硝基苯及其在应急监测中的应用

采用便携式GC-MS仪快速测定水中硝基苯,通过优化水中离子强度和顶空加热时间,使方法在0μg/L^300μg/L范围内线性良好,方法检出限为2.5μg/L。标准溶液6次测定结果的RSD为7.8%~10.9%,实际水样的加标回收率为80.7%~103%。同步测定试验表明,硝基苯与7种苯系物分离良好。与国标方法对比,该方法单个样品测定时间由2 h缩短为15 min。将该方法用于应急监测工作中,及时有效的数据可为污水处理及事故调查提供分析和研判依据。     

Locally enhanced electric field treatment (LEEFT) for water disinfection

• Nanowire-assisted LEEFT is applied for water disinfection with low voltages. • LEEFT inactivates bacteria by disrupting cell membrane through electroporation. • Multiple electrodes and device configurations have been developed for LEEFT. • The LEEFT is low-cost, highly efficient, and produces no DBPs. • The LEEFT can potentially be applicable for water disinfection at all scales. Water disinfection is a critical step in water and wastewater treatment. The most widely used chlorination suffers from the formation of carcinogenic disinfection by-products (DBPs) while alternative methods (e.g., UV, O₃, and membrane filtration) are limited by microbial regrowth, no residual disinfectant, and high operation cost. Here, a nanowire-enabled disinfection method, locally enhanced electric field treatment (LEEFT), is introduced with advantages of no chemical addition, no DBP formation, low energy consumption, and efficient microbial inactivation. Attributed to the lightning rod effect, the electric field near the tip area of the nanowires on the electrode is significantly enhanced to inactivate microbes, even though a small external voltage (usually<5 V) is applied. In this review, after emphasizing the significance of water disinfection, the theory of the LEEFT is explained. Subsequently, the recent development of the LEEFT technology on electrode materials and device configurations are summarized. The disinfection performance is analyzed, with respect to the operating parameters, universality against different microorganisms, electrode durability, and energy consumption. The studies on the inactivation mechanisms during the LEEFT are also reviewed. Lastly, the challenges and future research of LEEFT disinfection are discussed.