Ionic dye adsorption by zinc oxide nanoparticles

The adsorption behaviour of Basic Red 12, Acid Orange 7 and Acid Blue 1 on zinc oxide nanoparticles (ZNP) has been investigated to understand the physicochemical process involved and to explore the possible use of nanoparticles in the treatment and management of textile waste matter. The dye removal capacity of ZNP towards Basic Red 12, Acid Orange 7 and Acid Blue 1 was found to be 15.64, 6.78 and 6.38 mg g^?1, respectively. The adsorption process was pH dependent and optimum pH values of 9.0, 2.0 and 4.0 were obtained for Basic Red 12, Acid Orange 7 and Acid Blue 1, respectively. Equilibrium was established after 1.0 h for all dyes. Langmuir, Freundlich and Temkin isotherm models were applied to the system. The adsorbent ZNP was characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) and Fourier transform infrared (FTIR) techniques. SEM analysis revealed the noticeable nanoporous morphology of the material. The results of FTIR spectroscopy showed that the process is driven by an electrostatic complexation mechanism. XRD studies revealed the nanocrystalline structure of ZNP. BET surface area measurement suggested a high pore volume and large surface area for the adsorbent. The kinetic measurements suggested pseudo-second-order kinetic processes with high regression coefficients and smaller standard error of estimate values and lower residual sum of squares. The thermodynamic measurements suggested that all processes were exothermic and accompanied by negative values for Δ G⁰, Δ S⁰ and Δ H⁰.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.     

Emissions associated with meeting the future global wheat demand: A case study of UK production under climate change constraints

Climate change, population growth and socio-structural changes will make meeting future food demands extremely challenging. As wheat is a globally traded food commodity central to the food security of many nations, this paper uses it as an example to explore the impact of climate change on global food supply and quantify the resulting greenhouse gas emissions. Published data on projected wheat production is used to analyse how global production can be increased to match projected demand. The results show that the largest projected wheat demand increases are in areas most likely to suffer severe climate change impacts, but that global demand could be met if northern hemisphere producers exploit climate change benefits to increase production and narrow their yield gaps. Life cycle assessment of different climate change scenarios shows that in the case of one of the most important wheat producers (the UK) it may be possible to improve yields with an increase of only 0.6% in the emission intensity per unit of wheat produced in a 2 °C scenario. However, UK production would need to rise substantially, increasing total UK wheat production emissions by 26%. This demonstrates how national emission inventories and associated targets do not incentivise minimisation of global greenhouse gas emissions while meeting increased food demands, highlighting a triad of challenges: meeting the rising demand for food, adapting to climate change and reducing emissions.     

Using Sound to Reduce Visual Distraction from In-vehicle Human–Machine Interfaces

Objective: Driver distraction and inattention are the main causes of accidents. The fact that devices such as navigation displays and media players are part of the distraction problem has led to the formulation of guidelines advocating various means for minimizing the visual distraction from such interfaces. However, although design guidelines and recommendations are followed, certain interface interactions, such as menu browsing, still require off-road visual attention that increases crash risk. In this article, we investigate whether adding sound to an in-vehicle user interface can provide the support necessary to create a significant reduction in glances toward a visual display when browsing menus.

Methods: Two sound concepts were developed and studied; spearcons (time-compressed speech sounds) and earcons (musical sounds). A simulator study was conducted in which 14 participants between the ages of 36 and 59 took part. Participants performed 6 different interface tasks while driving along a highway route. A 3 × 6 within-group factorial design was employed with sound (no sound /earcons/spearcons) and task (6 different task types) as factors. Eye glances and corresponding measures were recorded using a head-mounted eye tracker. Participants’ self-assessed driving performance was also collected after each task with a 10-point scale ranging from 1 = very bad to 10 = very good. Separate analyses of variance (ANOVAs) were conducted for different eye glance measures and self-rated driving performance.

Results: It was found that the added spearcon sounds significantly reduced total glance time as well as number of glances while retaining task time as compared to the baseline (= no sound) condition (total glance time M = 4.15 for spearcons vs. M = 7.56 for baseline, p =.03). The earcon sounds did not result in such distraction-reducing effects. Furthermore, participants ratings of their driving performance were statistically significantly higher in the spearcon conditions compared to the baseline and earcon conditions (M = 7.08 vs. M = 6.05 and M = 5.99 respectively, p =.035 and p =.002).

Conclusions: The spearcon sounds seem to efficiently reduce visual distraction, whereas the earcon sounds did not reduce distraction measures or increase subjective driving performance. An aspect that must be further investigated is how well spearcons and other types of auditory displays are accepted by drivers in general and how they work in real traffic.     

Numerical simulation of premixed methane–air deflagration in a semi-confined obstructed chamber

In this paper, large eddy simulation coupled with a turbulent flame speed cloure (TFC) subgrid combustion model has been utilized to simulate premixed methane–air deflagration in a semi-confined chamber with three obstacles mounted inside.The computational results are in good agreement with published experimental data, including flame structures, pressure time history and flame speed. The attention is focused on the flame flow field interaction, pressure dynamics, as well as the mechanism of obstacle-induced deflagration. It is found that there is a positive feedback mechanism established between the flame propagation and the flow field. The pressure time history can be divided into four stages and the pseudo-combustion concept is proposed to explain the pressure oscillation phenomenon. The obstacle-induction mechanism includes direct effect and indirect effect, but do not always occur at the same time.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.     

Application of an odd/even predominance of n-alkanes in oil–source rock correlation: taking the lower Paleozoic strata of the Tarim Basin as an example

The composition and distribution of n-alkanes carbon numbers reflect the source of kerogenic organic matter, sedimentary environment, and maturity of the rocks. The comparison results of the n-alkanes GC (gas chromatography) chromatograms in the Tazhong Low Uplift show that the n-alkanes of the source rocks in Upper Ordovician display an odd carbon number predominance. At the same time, Cambrian–Lower Ordovician exhibit an even carbon number predominance. The correlation between oil and source rock illustrates that crude oils in the fields of well TZ10-12 and well TZ24 stem from the Upper Ordovician source rocks. The origins of the crude oils in the fields of well TZ161-162 and well TZ45 are Cambrian–Lower Ordovician. The strata corresponding to the crude oils with odd/even carbon number predominance match the oil–source rock correlation. Thus, the characteristics of odd/even carbon number predominance in n-alkane compounds are effective for oil–source rock correlation in the Tazhong Low Uplift, Tarim Basin.     

Carbon sequestration and soil microbes in purple paddy soil as affected by long-term fertilization

Soil organic carbon (SOC) sequestration impacts on food security and climate change and may be affected by soil microbes in fertilized croplands. A 12-year field experiment under the rice–wheat system was used to evaluate the effect of the long-term fertilization on the SOC accumulation, culturable soil microbes, and their interaction in purple paddy soil. Results showed that varied fertilizations resulted in a significant increase of the SOC content and stock in the plow layer, as well as rise in populations of major soil microbes, including bacteria, actinomycetes, and fungi compared with no fertilization. Soil with combined application of chemical NPK fertilizer and organic amendment (pig manure or rice straw return) on average had the highest organic carbon content and stock, amounts of bacteria, actinomycetes, and fungi, which were 7.8%, 5.8%, 75.8%, 130.5%, and 16.2% higher than the NPK fertilization alone. Fertilization differentially altered populations of the functional anaerobic bacteria in paddy soil. With the combined application of chemical NPK fertilizer and organic amendment, soil displayed higher amounts of anaerobic cellulolytic bacteria, anaerobic fermentative bacteria, hydrogen-producing acetogen, methanogenic bacteria, denitrifying bacteria, and sulphate-reducing bacteria than that with the NPK fertilization alone or no fertilization. Populations of all three major soil microbes showed significantly positive correlations with the SOC content, indicating their interaction was of mutual promotion. Data suggest that the combined application of the NPK fertilizer with organic amendment especially by the rice straw return is recommended to sustain the soil biological fertility and mitigate the emission of the greenhouse gas by the SOC sequestration in purple paddy soil.     

Gathering “wild” food in the city: rethinking the role of foraging in urban ecosystem planning and management

Recent “green” planning initiatives envision food production, including urban agriculture and livestock production, as desirable elements of sustainable cities. We use an integrated urban political ecology and human–plant geographies framework to explore how foraging for “wild” foods in cities, a subversive practice that challenges prevailing views about the roles of humans in urban green spaces, has potential to also support sustainability goals. Drawing on research from Baltimore, New York City, Philadelphia, and Seattle, we show that foraging is a vibrant and ongoing practice among diverse urban residents in the USA. At the same time, as reflected in regulations, planning practices, and attitudes of conservation practitioners, it is conceptualised as out of place in urban landscapes and an activity to be discouraged. We discuss how paying attention to urban foraging spaces and practices can strengthen green space planning and summarise opportunities for and challenges associated with including foragers and their concerns.     

Sustainable development and the water–energy–food nexus: A perspective on livelihoods

The water–energy–food nexus is being promoted as a conceptual tool for achieving sustainable development. Frameworks for implementing nexus thinking, however, have failed to explicitly or adequately incorporate sustainable livelihoods perspectives. This is counterintuitive given that livelihoods are key to achieving sustainable development. In this paper we present a critical review of nexus approaches and identify potential linkages with sustainable livelihoods theory and practice, to deepen our understanding of the interrelated dynamics between human populations and the natural environment. Building upon this review, we explore the concept of ‘environmental livelihood security’ – which encompasses a balance between natural resource supply and human demand on the environment to promote sustainability – and develop an integrated nexus-livelihoods framework for examining the environmental livelihood security of a system. The outcome is an integrated framework with the capacity to measure and monitor environmental livelihood security of whole systems by accounting for the water, energy and food requisites for livelihoods at multiple spatial scales and institutional levels. We anticipate this holistic approach will not only provide a significant contribution to achieving national and regional sustainable development targets, but will also be effective for promoting equity amongst individuals and communities in local and global development agendas.