Effect of 450 MHz Microwave Modulated with 217 Hz on Human EEG in Rest

Summary This study focuses on discrimination of changes, produced by low-level microwave exposure in intensity and time variability of the human EEG at rest. The power spectral density (PSD) method and nonlinear scaling analysis of the length distribution of low variability periods (LDLVP) were selected for analysis of the EEG signal. During the study, 19 healthy volunteers were exposed to a microwave (450 MHz) of 217 Hz frequency on-off modulation. The field power density at the scalp was 0.16 mW/cm². The experimental protocol consisted of ten cycles of repetitive microwave exposure. Signals from frontal, temporal, parietal and occipital EEG channels on EEG theta, alpha and beta rhythms were analysed. Exposure to microwave causes average increase of EEG activity. LDLVP analysis discriminated significant effect in time variability for 2 subjects (11%). PSD method detected significant changes in intensity for 4 subjects (21%). The effect of low-level microwave exposure is stronger on EEG beta rhythm in temporal and parietal regions of the human brain.     

Impact of Human Activities on Carbon Dioxide (CO<Subscript>2</Subscript>) Emissions: A Statistical Analysis

Summary The balance of evidence suggests a perceptible human influence on global ecosystems. Human activities are affecting the global ecosystem, some directly and some indirectly. If researchers could clarify the extent to which specific human activities affect global ecosystems, they would be in a much better position to suggest strategies for mitigating against the worst disturbances. Sophisticated statistical analysis can help in interpreting the influence of specific human activities on global ecosystems more carefully. This study aims at identifying significant or influential human activities (i.e. factors) on CO₂ emissions using statistical analyses. The study was conducted for two cases: (i) developed countries and (ii) developing countries. In developed countries, this study identified three influential human activities for CO₂ emissions: (i) combustion of fossil fuels, (ii) population pressure on natural and terrestrial ecosystems, and (iii) land use change. In developing countries, the significant human activities causing an upsurge of CO₂ emissions are: (i) combustion of fossil fuels, (ii) terrestrial ecosystem strength and (iii) land use change. Among these factors, combustion of fossil fuels is the most influential human activity for CO₂ emissions both in developed and developing countries. Regression analysis based on the factor scores indicated that combustion of fossil fuels has significant positive influence on CO₂ emissions in both developed and developing countries. Terrestrial ecosystem strength has a significant negative influence on CO₂ emissions. Land use change and CO₂ emissions are positively related, although regression analysis showed that the influence of land use change on CO₂ emissions was still insignificant. It is anticipated, from the findings of this study, that CO₂ emissions can be reduced by reducing fossil-fuel consumption and switching to alternative energy sources, preserving exiting forests, planting trees on abandoned and degraded forest lands, or by planting trees by social/agroforestry on agricultural lands.     

Estimating the Recreational-Use Value for Hiking in Bellenden Ker National Park, Australia

The recreational-use value of hiking in the Bellenden Ker National Park, Australia has been estimated using a zonal travel cost model. Multiple destination visitors have been accounted for by converting visitors’ own ordinal ranking of the various sites visited to numerical weights, using an expected-value approach. The value of hiking and camping in this national park was found to be $AUS 250,825 per year, or $AUS 144,45 per visitor per year, which is similar to findings from other studies valuing recreational benefits. The management of the park can use these estimates when considering the introduction of a system of user pays fees. In addition, they might be important when decisions need to be made about the allocation of resources for maintenance or upgrade of tracks and facilities.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

PREDICTING FECAL COLIFORM BACTERIA LEVELS IN THE CHARLES RIVER,MASSACHUSETTS, USA1

In Massachusetts, the Charles River Watershed Association conducts a regular water quality monitoring and public notification program in the Charles River Basin during the recreational season to inform users of the river's health. This program has relied on laboratory analyses of river samples for fecal coliform bacteria levels, however, results are not available until at least 24 hours after sampling. To avoid the need for laboratory analyses, ordinary least squares (OLS) and logistic regression models were developed to predict fecal coliform bacteria concentrations and the probabilities of exceeding the Massachusetts secondary contact recreation standard for bacteria based on meteorological conditions and streamflow. The OLS models resulted in adjusted R²s ranging from 50 to 60 percent. An uncertainty analysis reveals that of the total variability of fecal coliform bacteria concentrations, 45 percent is explained by the OLS regression model, 15 percent is explained by both measurement and space sampling error, and 40 percent is explained by time sampling error. Higher accuracy in future bacteria forecasting models would likely result from reductions in laboratory measurement errors and improved sampling designs.     

DEVELOPMENT OF EMPIRICAL,GEOGRAPHICALLY SPECIFIC WATER QUALITY CRITERIA: A CONDITIONAL PROBABILITY ANALYSIS APPROACH1

The need for scientifically defensible water quality standards for nonpoint source pollution control continues to be a pressing environmental issue. The probability of impact at differing levels of nonpoint source pollution was determined using the biological response of instream organisms empirically obtained from a statistical survey. A conditional probability analysis was used to calculate a biological threshold of impact as a function of the likelihood of exceeding a given value of pollution metric for a specified geographic area. Uncertainty and natural variability were inherently incorporated into the analysis through the use of data from a probabilistic survey. Data from wadable streams in the mid‐Atlantic area of the U.S. were used to demonstrate the approach. Benthic macroinvertebrate community index values (EPT taxa richness) were used to identify impacted stream communities. Percent fines in substrate (silt/clay fraction, > 0.06 mm) were used as a surrogate indicator for sedimentation. Thresholds of impact due to sedimentation were identified by three different techniques, and were in the range of 12 to 15 percent fines. These values were consistent with existing literature from laboratory and field studies on the impact of sediments on aquatic life in freshwater streams. All results were different from values determined from current regulatory guidance. Finally, it was illustrated how these thresholds could be used to develop criterion for protection of aquatic life in streams.     

铁路客运站疏散安全风险分析与对策研究——以乌鲁木齐站为例

本文对乌鲁木齐站疏散安全进行分析研究。经乌鲁木齐站客流数据分析得,日均客流量1.78万人,日常高峰时段客流量2.4万人,每日早高峰客流在9:00～12:00之间,晚间客流高峰在18:00～24:00之间。乌鲁木齐站以原有疏散能力计算,日常高峰时段旅客平均排队时间为36.7min,其他特殊时段旅客积压排队现象更长,造成旅客需要提前1.3～2.0小时排队进站。影响乌鲁木齐站疏散安全的主要原因包括疏散设施未全部投入使用,安检设备通过能力有限,旅客疏散路线复杂等。笔者从疏散路径、疏散设施和疏散管理等方面提出疏散安全风险控制的对策和建议。     

突发事件机理体系与现代应急管理体制设计

本文为了增加对突发事件的科学认识,提升应急管理的能力水平,首先对突发事件和应急管理的内在机理进行剖析。通过分阶段、划层次地构建"4L-5S"机理分析模型,将二者划归为统一体系,以理清其逻辑内涵;然后,为顺应时代发展特征,满足应急管理的更高要求,实现应急管理工作从非常态协同应对转为常态化职能管理,对现代应急管理体制加以总体设计。从而,突发事件机理体系设计使得我国的突发事件机理研究逐渐过渡至具有阶段性和层次性,现代应急管理体制设计使得我国应急管理整合出具备现代思维理念的逻辑框架。     

西部复杂性地貌地区消防规划评估与建设研究 ——以凉山州区域为例

城市消防规划作为城市消防安全体系建设的重要依据,是助力城市现代化进程、推动城市综合安全智慧网络形成的重要基石。通过对凉山州各地貌地区消防现状存在问题的分析,结合凉山州的实际情况及全州建设发展多种形式综合性消防应急救援队伍的需要,提出了能满足全州消防安全需求且能够有效指导城市消防建设的相应对策。